From: "Nibble Max" <nibble.max@gmail.com>
To: "Antti Palosaari" <crope@iki.fi>
Cc: "linux-media" <linux-media@vger.kernel.org>,
"Olli Salonen" <olli.salonen@iki.fi>
Subject: [PATCH 2/2] cx23885: add DVBSky S950C and T980C RC support
Date: Thu, 23 Oct 2014 18:02:16 +0800 [thread overview]
Message-ID: <201410231802135463883@gmail.com> (raw)
DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885
The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/
Signed-off-by: Nibble Max <nibble.max@gmail.com>
---
drivers/media/pci/cx23885/cx23885-cards.c | 6 ++++++
drivers/media/pci/cx23885/cx23885-input.c | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index ac34c27..d9ba48c 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -1669,6 +1669,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1716,6 +1718,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1764,6 +1768,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index f81c2f9..0bf6839 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -88,6 +88,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -141,6 +143,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -308,6 +312,8 @@ int cx23885_input_init(struct cx23885_dev *dev)
rc_map = RC_MAP_TBS_NEC;
break;
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_T980C:
+ case CX23885_BOARD_DVBSKY_S950C:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
--
1.9.1
next reply other threads:[~2014-10-23 10:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-23 10:02 Nibble Max [this message]
2014-10-30 19:39 ` [PATCH 2/2] cx23885: add DVBSky S950C and T980C RC support Olli Salonen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201410231802135463883@gmail.com \
--to=nibble.max@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).