From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from down.free-electrons.com ([37.187.137.238]:60642 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750781AbaK0Nhy (ORCPT ); Thu, 27 Nov 2014 08:37:54 -0500 Date: Thu, 27 Nov 2014 14:37:50 +0100 From: Boris Brezillon To: Boris Brezillon Cc: Dave Airlie , dri-devel@lists.freedesktop.org, Thierry Reding , linux-kernel@vger.kernel.org, Mauro Carvalho Chehab , Hans Verkuil , Laurent Pinchart , linux-media@vger.kernel.org, Nicolas Ferre Subject: Re: [PATCH v3 0/3] drm: describe display bus format Message-ID: <20141127143750.3984ddd0@bbrezillon> In-Reply-To: <1416318380-20122-1-git-send-email-boris.brezillon@free-electrons.com> References: <1416318380-20122-1-git-send-email-boris.brezillon@free-electrons.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi, On Tue, 18 Nov 2014 14:46:17 +0100 Boris Brezillon wrote: > Hello, > > This series makes use of the MEDIA_BUS_FMT definition to describe how > the data are transmitted to the display. > > This will allow drivers to configure their output display bus according > to the display capabilities. > For example some display controllers support DPI (or raw RGB) connectors > and need to specify which format will be transmitted on the DPI bus > (RGB444, RGB565, RGB888, ...). > > This series also adds a field to the panel_desc struct so that one > can specify which format is natevely supported by a panel. Thierry, Laurent, Dave, can you take a look at this patch series: this is the last missing dependency to get the atmel-hlcdc DRM driver mainlined, and I was expecting to get this driver in 3.19... Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com