From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ie0-f182.google.com ([209.85.223.182]:54412 "EHLO mail-ie0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752201AbbATPiX (ORCPT ); Tue, 20 Jan 2015 10:38:23 -0500 Received: by mail-ie0-f182.google.com with SMTP id ar1so5753346iec.13 for ; Tue, 20 Jan 2015 07:38:22 -0800 (PST) Date: Tue, 20 Jan 2015 15:38:15 +0000 From: Lee Jones To: Jacek Anaszewski Cc: linux-leds@vger.kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, kyungmin.park@samsung.com, b.zolnierkie@samsung.com, pavel@ucw.cz, cooloney@gmail.com, rpurdie@rpsys.net, sakari.ailus@iki.fi, s.nawrocki@samsung.com, Andrzej Hajda , Chanwoo Choi , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala Subject: Re: [PATCH/RFC v10 09/19] DT: Add documentation for the mfd Maxim max77693 Message-ID: <20150120153815.GB13701@x1> References: <1420816989-1808-1-git-send-email-j.anaszewski@samsung.com> <1420816989-1808-10-git-send-email-j.anaszewski@samsung.com> <20150120112107.GG13701@x1> <54BE67EA.2070507@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <54BE67EA.2070507@samsung.com> Sender: linux-media-owner@vger.kernel.org List-ID: On Tue, 20 Jan 2015, Jacek Anaszewski wrote: > On 01/20/2015 12:21 PM, Lee Jones wrote: > >On Fri, 09 Jan 2015, Jacek Anaszewski wrote: > > > >>This patch adds device tree binding documentation for > >>the flash cell of the Maxim max77693 multifunctional device. > >> > >>Signed-off-by: Jacek Anaszewski > >>Signed-off-by: Andrzej Hajda > >>Acked-by: Kyungmin Park > >>Cc: Lee Jones > >>Cc: Chanwoo Choi > >>Cc: Bryan Wu > >>Cc: Richard Purdie > >>Cc: Rob Herring > >>Cc: Pawel Moll > >>Cc: Mark Rutland > >>Cc: Ian Campbell > >>Cc: Kumar Gala > >>--- > >> Documentation/devicetree/bindings/mfd/max77693.txt | 69 ++++++++++++++++++++ > >> 1 file changed, 69 insertions(+) > >> > >>diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt > >>index 01e9f30..ef184f0 100644 > >>--- a/Documentation/devicetree/bindings/mfd/max77693.txt > >>+++ b/Documentation/devicetree/bindings/mfd/max77693.txt > >>@@ -41,7 +41,52 @@ Optional properties: > >> To get more informations, please refer to documentaion. > >> [*] refer Documentation/devicetree/bindings/pwm/pwm.txt > >> > >>+- led : the LED submodule device node > >>+ > >>+There are two led outputs available - fled1 and fled2. Each of them can > >>+control a separate led or they can be connected together to double > >>+the maximum current for a single connected led. One led is represented > >>+by one child node. > >>+ > >>+Required properties: > >>+- compatible : Must be "maxim,max77693-led". > >>+ > >>+Optional properties: > >>+- maxim,trigger-type : Flash trigger type. > >>+ Possible trigger types: > >>+ MAX77693_LED_TRIG_TYPE_EDGE - Rising edge of the signal triggers > >>+ the flash, > >>+ MAX77693_LED_TRIG_TYPE_LEVEL - Strobe pulse length controls > >>+ duration of the flash. > > > >I think you should represent the proper values here instead of the > >defines. > > I see both versions in the existing bindings and also a combination of > them, e.g.: MAX77693_LED_TRIG_TYPE_EDGE (0). I think that it is > reasonable to mention the macros, especially if they are to appear > in the DT binding example at the end of the documentation file. > > >>+- maxim,boost-mode : > >>+ In boost mode the device can produce up to 1.2A of total current > >>+ on both outputs. The maximum current on each output is reduced > >>+ to 625mA then. If not enabled explicitly, boost setting defaults to > >>+ MAX77693_LED_BOOST_FIXED in case both current sources are used. > >>+ Possible values: > >>+ MAX77693_LED_BOOST_OFF - no boost, > >>+ MAX77693_LED_BOOST_ADAPTIVE - adaptive mode, > >>+ MAX77693_LED_BOOST_FIXED - fixed mode. > > > >Same here. > > MAX77693_LED_BOOST_OFF (0) - no boost, > MAX77693_LED_BOOST_ADAPTIVE (1) - adaptive mode, > MAX77693_LED_BOOST_FIXED (2) - fixed mode. This is fine too. > >>+- maxim,boost-vout : Output voltage of the boost module in millivolts. > > > >-mvout? > >-microvout? > > maxim,boost-mvout ? Right. > >>+- maxim,vsys-min : Low input voltage level in millivolts. Flash is not fired > >>+ if chip estimates that system voltage could drop below this level due > >>+ to flash power consumption. > > > >mvsys? > >microvsys? > > maxim,mvsys-min ? Looks okay to me. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog