From: Kozlov Sergey <serjk@netup.ru>
To: linux-media@vger.kernel.org
Subject: [PATCH 5/5] [media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver
Date: Mon, 02 Feb 2015 12:22:32 +0300 [thread overview]
Message-ID: <20150203082419.CA9AC1BC32CD@debian> (raw)
NetUP Dual Universal CI PCIe board driver.
The board has
- two CI slots
- two I2C adapters
- SPI master bus for accessing flash memory containing
FPGA firmware
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
---
MAINTAINERS | 9 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 3 +-
drivers/media/pci/netup/Kconfig | 12 +
drivers/media/pci/netup/Makefile | 9 +
drivers/media/pci/netup/netup_unidvb.h | 232 +++++++
drivers/media/pci/netup/netup_unidvb_ci.c | 248 ++++++++
drivers/media/pci/netup/netup_unidvb_core.c | 919 +++++++++++++++++++++++++++
drivers/media/pci/netup/netup_unidvb_i2c.c | 350 ++++++++++
drivers/media/pci/netup/netup_unidvb_spi.c | 272 ++++++++
10 files changed, 2054 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/pci/netup/Kconfig
create mode 100644 drivers/media/pci/netup/Makefile
create mode 100644 drivers/media/pci/netup/netup_unidvb.h
create mode 100644 drivers/media/pci/netup/netup_unidvb_ci.c
create mode 100644 drivers/media/pci/netup/netup_unidvb_core.c
create mode 100644 drivers/media/pci/netup/netup_unidvb_i2c.c
create mode 100644 drivers/media/pci/netup/netup_unidvb_spi.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a52001c..e2febd3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6572,6 +6572,15 @@ F: include/net/netrom.h
F: include/uapi/linux/netrom.h
F: net/netrom/
+NETUP VIDEO4LINUX DRIVER
+M: Sergey Kozlov <serjk@netup.ru>
+L: linux-media@vger.kernel.org
+W: http://linuxtv.org/
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/pci/netup/*
+
NETWORK BLOCK DEVICE (NBD)
M: Paul Clements <Paul.Clements@steeleye.com>
S: Maintained
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index 218144a..f1ec01e 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -47,6 +47,7 @@ source "drivers/media/pci/mantis/Kconfig"
source "drivers/media/pci/ngene/Kconfig"
source "drivers/media/pci/ddbridge/Kconfig"
source "drivers/media/pci/smipcie/Kconfig"
+source "drivers/media/pci/netup/Kconfig"
endif
endif #MEDIA_PCI_SUPPORT
diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile
index 0baf0d2..92be70e 100644
--- a/drivers/media/pci/Makefile
+++ b/drivers/media/pci/Makefile
@@ -12,7 +12,8 @@ obj-y += ttpci/ \
ngene/ \
ddbridge/ \
saa7146/ \
- smipcie/
+ smipcie/ \
+ netup/
obj-$(CONFIG_VIDEO_IVTV) += ivtv/
obj-$(CONFIG_VIDEO_ZORAN) += zoran/
diff --git a/drivers/media/pci/netup/Kconfig b/drivers/media/pci/netup/Kconfig
new file mode 100644
index 0000000..3ad3cc3
--- /dev/null
+++ b/drivers/media/pci/netup/Kconfig
@@ -0,0 +1,12 @@
+config DVB_NETUP_UNIDVB
+ tristate "NetUP Universal DVB card support"
+ depends on DVB_CORE && VIDEO_DEV && PCI && I2C && SPI_MASTER
+ select VIDEOBUF_DVB
+ select VIDEOBUF_VMALLOC
+ select DVB_HORUS3A if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_ASCOT2E if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
+ ---help---
+ Support for NetUP PCI express Universal DVB card.
+
diff --git a/drivers/media/pci/netup/Makefile b/drivers/media/pci/netup/Makefile
new file mode 100644
index 0000000..ee6ae05
--- /dev/null
+++ b/drivers/media/pci/netup/Makefile
@@ -0,0 +1,9 @@
+netup-unidvb-objs += netup_unidvb_core.o
+netup-unidvb-objs += netup_unidvb_i2c.o
+netup-unidvb-objs += netup_unidvb_ci.o
+netup-unidvb-objs += netup_unidvb_spi.o
+
+obj-$(CONFIG_DVB_NETUP_UNIDVB) += netup-unidvb.o
+
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += -Idrivers/media/dvb-frontends
diff --git a/drivers/media/pci/netup/netup_unidvb.h b/drivers/media/pci/netup/netup_unidvb.h
new file mode 100644
index 0000000..4d0e1eb
--- /dev/null
+++ b/drivers/media/pci/netup/netup_unidvb.h
@@ -0,0 +1,232 @@
+/*
+ * netup_unidvb.h
+ *
+ * Data type definitions for NetUP Universal Dual DVB-CI
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+#include <dvb_ca_en50221.h>
+
+#define NETUP_UNIDVB_NAME "netup_unidvb"
+#define NETUP_UNIDVB_VERSION "0.0.1"
+#define NETUP_VENDOR_ID 0x1b55
+#define NETUP_PCI_DEV_REVISION 0x2
+
+/* Avalon-MM PCI-E registers */
+#define AVL_PCIE_IENR 0x50
+#define AVL_PCIE_ISR 0x40
+#define AVL_IRQ_ENABLE 0x80
+#define AVL_IRQ_ASSERTED 0x80
+
+/* IRQ-related regisers */
+#define REG_ISR 0x4890
+#define REG_ISR_MASKED 0x4892
+#define REG_IMASK_SET 0x4894
+#define REG_IMASK_CLEAR 0x4896
+
+#define NETUP_UNIDVB_IRQ_SPI (1 << 0)
+#define NETUP_UNIDVB_IRQ_I2C0 (1 << 1)
+#define NETUP_UNIDVB_IRQ_I2C1 (1 << 2)
+#define NETUP_UNIDVB_IRQ_FRA0 (1 << 4) /* FrontendA IRQ0 */
+#define NETUP_UNIDVB_IRQ_FRA1 (1 << 5) /* FrontendA IRQ1 */
+#define NETUP_UNIDVB_IRQ_FRB0 (1 << 6) /* FrontendB IRQ0 */
+#define NETUP_UNIDVB_IRQ_FRB1 (1 << 7) /* FrontendB IRQ1 */
+#define NETUP_UNIDVB_IRQ_DMA1 (1 << 8) /* DMA1 */
+#define NETUP_UNIDVB_IRQ_DMA2 (1 << 9) /* DMA2 */
+#define NETUP_UNIDVB_IRQ_CI (1 << 10) /* CI MAIN MODULE */
+#define NETUP_UNIDVB_IRQ_CAM0 (1 << 11) /* CI CAM0 */
+#define NETUP_UNIDVB_IRQ_CAM1 (1 << 12) /* CI CAM1 */
+
+/* GPIO registers */
+#define GPIO_REG_IO 0x4880
+#define GPIO_REG_IO_TOGGLE 0x4882
+#define GPIO_REG_IO_SET 0x4884
+#define GPIO_REG_IO_CLEAR 0x4886
+/* GPIO pins */
+#define GPIO_FEA_RESET (1 << 0)
+#define GPIO_FEB_RESET (1 << 1)
+#define GPIO_RFA_CTL (1 << 2)
+#define GPIO_RFB_CTL (1 << 3)
+#define GPIO_FEA_TU_RESET (1 << 4)
+#define GPIO_FEB_TU_RESET (1 << 5)
+
+/* DMA section */
+#define NETUP_DMA0_ADDR 0x4900
+#define NETUP_DMA1_ADDR 0x4940
+/* DMA part. 8 blocks for 120Mbps per port is ok */
+#define NETUP_DMA_BLOCKS_COUNT 8
+#define NETUP_DMA_PACKETS_COUNT 128
+/* DMA block status */
+#define NETUP_DMA_UNK 1
+#define NETUP_DMA_DONE 2
+#define BIT_DMA_RUN 1
+#define BIT_DMA_ERROR 2
+#define BIT_DMA_IRQ 0x200
+
+struct netup_dma_regs {
+ /* see BIT_DMA_* defines;
+ * [24-31] - dma_current_length;
+ * [16-23] - dma_current_block_cnt */
+ u32 ctrlstat_set;
+ u32 ctrlstat_clear;
+ /* dma start address, low */
+ u32 start_addr_lo;
+ /* dma start address, high */
+ u32 start_addr_hi;
+ /* [0-7] dma_packet_size (188);
+ * [16-23] packets count in block (128);
+ * [24-31] dma_length - blocks count in dma */
+ u32 size;
+ /* 8ns intervals;
+ * for example 3sec => timeout = 375 000 000 */
+ u32 timeout;
+ /* dma current address, low */
+ u32 curr_addr_lo;
+ /* dma current address, high */
+ u32 curr_addr_hi;
+ u32 stat_pkt_received;
+ u32 stat_pkt_accepted;
+ u32 stat_pkt_overruns;
+ u32 stat_pkt_underruns;
+ u32 stat_fifo_overruns;
+} __packed __aligned(1);
+
+struct netup_unidvb_buffer {
+ struct videobuf_buffer vb;
+ u32 size;
+};
+
+struct netup_dma {
+ u8 num;
+ spinlock_t lock;
+ struct netup_unidvb_dev *ndev;
+ struct netup_dma_regs *regs;
+ u32 ring_buffer_size;
+ u8 *addr_virt;
+ dma_addr_t addr_phys;
+ u64 addr_last;
+ u32 high_addr;
+ u32 data_offset;
+ u32 data_size;
+ struct list_head free_buffers;
+ struct work_struct work;
+ struct timer_list timeout;
+};
+
+/* I2C bus section */
+#define NETUP_I2C_BUS0_ADDR 0x4800
+#define NETUP_I2C_BUS1_ADDR 0x4840
+#define NETUP_I2C_TIMEOUT HZ
+
+struct netup_i2c_fifo_regs {
+ union {
+ u8 data8;
+ u16 data16;
+ u32 data32;
+ };
+ u8 padding[4];
+ u16 stat_ctrl;
+} __packed __aligned(1);
+
+struct netup_i2c_regs {
+ u16 clkdiv;
+ u16 twi_ctrl0_stat;
+ u16 twi_addr_ctrl1;
+ u16 length;
+ u8 padding1[8];
+ struct netup_i2c_fifo_regs tx_fifo;
+ u8 padding2[6];
+ struct netup_i2c_fifo_regs rx_fifo;
+} __packed __aligned(1);
+
+enum netup_i2c_state {
+ STATE_DONE,
+ STATE_WAIT,
+ STATE_WANT_READ,
+ STATE_WANT_WRITE,
+ STATE_ERROR
+};
+
+struct netup_i2c {
+ spinlock_t lock;
+ wait_queue_head_t wq;
+ struct i2c_adapter adap;
+ struct netup_unidvb_dev *dev;
+ struct netup_i2c_regs *regs;
+ struct i2c_msg *msg;
+ enum netup_i2c_state state;
+ u32 xmit_size;
+};
+
+/* CI section */
+struct netup_ci_state {
+ struct dvb_ca_en50221 ca;
+ u8 __iomem *membase8_config;
+ u8 __iomem *membase8_io;
+ struct netup_unidvb_dev *dev;
+ int status;
+ int nr;
+};
+
+#define CAM_CTRLSTAT_READ_SET 0x4980
+#define CAM_CTRLSTAT_CLR 0x4982
+
+/* SPI flash section */
+struct netup_spi;
+
+/* main device context */
+
+struct netup_unidvb_dev {
+ struct pci_dev *pci_dev;
+ int pci_bus;
+ int pci_slot;
+ int pci_func;
+ int board_num;
+ int old_fw;
+ /* MMIO */
+ u32 __iomem *lmmio0;
+ u8 __iomem *bmmio0;
+ u32 __iomem *lmmio1;
+ u8 __iomem *bmmio1;
+ struct videobuf_dvb_frontends frontends[2];
+ /* I2C buses */
+ struct netup_i2c i2c[2];
+ /* DMA */
+ struct workqueue_struct *wq;
+ struct netup_dma dma[2];
+ /* CI slots */
+ struct netup_ci_state ci[2];
+ /* SPI */
+ struct netup_spi *spi;
+};
+
+int netup_i2c_register(struct netup_unidvb_dev *ndev);
+void netup_i2c_unregister(struct netup_unidvb_dev *ndev);
+irqreturn_t netup_i2c_interrupt(struct netup_i2c *i2c);
+irqreturn_t netup_spi_interrupt(struct netup_spi *spi);
+irqreturn_t netup_dma_interrupt(struct netup_dma *dma);
+int netup_unidvb_ci_register(
+ struct netup_unidvb_dev *dev, int num, struct pci_dev *pci_dev);
+void netup_unidvb_ci_unregister(struct netup_unidvb_dev *dev, int num);
+int netup_spi_init(struct netup_unidvb_dev *ndev);
+void netup_spi_release(struct netup_unidvb_dev *ndev);
diff --git a/drivers/media/pci/netup/netup_unidvb_ci.c b/drivers/media/pci/netup/netup_unidvb_ci.c
new file mode 100644
index 0000000..3610634
--- /dev/null
+++ b/drivers/media/pci/netup/netup_unidvb_ci.c
@@ -0,0 +1,248 @@
+/*
+ * netup_unidvb_ci.c
+ *
+ * DVB CAM support for NetUP Universal Dual DVB-CI
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "netup_unidvb.h"
+
+static int ci_debug;
+
+#define dprintk(args...) \
+do { \
+ if (ci_debug) \
+ dev_dbg(&dev->pci_dev->dev, args); \
+} while (0)
+
+module_param(ci_debug, int, 0644);
+
+/* CI */
+#define CAM0_CONFIG 0x0
+#define CAM0_IO 0x8000
+#define CAM0_MEM 0x10000
+#define CAM0_SZ 32
+
+#define CAM1_CONFIG 0x20000
+#define CAM1_IO 0x28000
+#define CAM1_MEM 0x30000
+#define CAM1_SZ 32
+
+#define CAM_CTRLSTAT_READ_SET 0x4980
+#define CAM_CTRLSTAT_CLR 0x4982
+
+#define BIT_CAM_STCHG (1<<0)
+#define BIT_CAM_PRESENT (1<<1)
+#define BIT_CAM_RESET (1<<2)
+#define BIT_CAM_BYPASS (1<<3)
+#define BIT_CAM_READY (1<<4)
+#define BIT_CAM_ERROR (1<<5)
+#define BIT_CAM_OVERCURR (1<<6)
+
+#define CAM1_SHIFT 8
+
+
+static int netup_unidvb_ci_slot_ts_ctl(
+ struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+ u16 shift = (state->nr == 1) ? CAM1_SHIFT : 0;
+
+ dprintk("%s(): CAM_CTRLSTAT=0x%x\n",
+ __func__, readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET));
+ if (slot != 0)
+ return -EINVAL;
+ /* pass data to CAM module */
+ writew(BIT_CAM_BYPASS << shift, dev->bmmio0 + CAM_CTRLSTAT_CLR);
+ dprintk("%s(): CAM_CTRLSTAT=0x%x done\n",
+ __func__, readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET));
+ return 0;
+}
+
+static int netup_unidvb_ci_slot_shutdown(
+ struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+
+ dprintk("%s()\n", __func__);
+ return 0;
+}
+
+static int netup_unidvb_ci_slot_reset(
+ struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+ unsigned long timeout = 0;
+ u16 shift = (state->nr == 1) ? CAM1_SHIFT : 0;
+ u16 ci_stat = 0;
+ int reset_counter = 3;
+
+ dprintk("%s(): CAM_CTRLSTAT_READ_SET=0x%x\n",
+ __func__, readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET));
+reset:
+ timeout = jiffies + 5*HZ;
+ /* start reset */
+ writew(BIT_CAM_RESET << shift, dev->bmmio0 + CAM_CTRLSTAT_READ_SET);
+ dprintk("%s(): waiting for reset\n", __func__);
+ /* wait until reset done */
+ while (time_before(jiffies, timeout)) {
+ ci_stat = readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET);
+ if (ci_stat & (BIT_CAM_READY << shift))
+ break;
+ udelay(1000);
+ }
+ if (!(ci_stat & (BIT_CAM_READY << shift)) && reset_counter > 0) {
+ dprintk("%s(): CAMP reset timeout! Will try again..\n",
+ __func__);
+ reset_counter--;
+ goto reset;
+ }
+ return 0;
+}
+
+static int netup_unidvb_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+ int slot, int open)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+ u16 shift = (state->nr == 1) ? CAM1_SHIFT : 0;
+ u16 ci_stat = 0;
+
+ dprintk("%s(): CAM_CTRLSTAT_READ_SET=0x%x\n",
+ __func__, readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET));
+ ci_stat = readw(dev->bmmio0 + CAM_CTRLSTAT_READ_SET);
+ if (ci_stat & (BIT_CAM_READY << shift)) {
+ state->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ } else if (ci_stat & (BIT_CAM_PRESENT << shift)) {
+ state->status = DVB_CA_EN50221_POLL_CAM_PRESENT;
+ } else {
+ state->status = 0;
+ }
+ return state->status;
+}
+
+static int netup_unidvb_ci_read_attribute_mem(
+ struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+ u8 val = state->membase8_config[addr];
+
+ dprintk("%s(): addr=0x%x val=0x%x\n", __func__, addr, val);
+ return val;
+}
+
+static int netup_unidvb_ci_write_attribute_mem(
+ struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+
+ dprintk("%s(): addr=0x%x data=0x%x\n", __func__, addr, data);
+ state->membase8_config[addr] = data;
+ return 0;
+}
+
+static int netup_unidvb_ci_read_cam_ctl(
+ struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+ u8 val = state->membase8_io[addr];
+
+ dprintk("%s(): addr=0x%x val=0x%x\n", __func__, addr, val);
+ return val;
+}
+
+static int netup_unidvb_ci_write_cam_ctl(
+ struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+ struct netup_ci_state *state = en50221->data;
+ struct netup_unidvb_dev *dev = state->dev;
+
+ dprintk("%s(): addr=0x%x data=0x%x\n", __func__, addr, data);
+ state->membase8_io[addr] = data;
+ return 0;
+}
+
+int netup_unidvb_ci_register(
+ struct netup_unidvb_dev *dev, int num, struct pci_dev *pci_dev)
+{
+ int result;
+ struct netup_ci_state *state;
+
+ if (num < 0 || num > 1) {
+ dev_err(&pci_dev->dev, "%s(): invalid CI adapter %d\n",
+ __func__, num);
+ return -EINVAL;
+ }
+ state = &dev->ci[num];
+ state->nr = num;
+ state->membase8_config = dev->bmmio1 +
+ ((num == 0) ? CAM0_CONFIG : CAM1_CONFIG);
+ state->membase8_io = dev->bmmio1 +
+ ((num == 0) ? CAM0_IO : CAM1_IO);
+ state->dev = dev;
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = netup_unidvb_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = netup_unidvb_ci_write_attribute_mem;
+ state->ca.read_cam_control = netup_unidvb_ci_read_cam_ctl;
+ state->ca.write_cam_control = netup_unidvb_ci_write_cam_ctl;
+ state->ca.slot_reset = netup_unidvb_ci_slot_reset;
+ state->ca.slot_shutdown = netup_unidvb_ci_slot_shutdown;
+ state->ca.slot_ts_enable = netup_unidvb_ci_slot_ts_ctl;
+ state->ca.poll_slot_status = netup_unidvb_poll_ci_slot_status;
+ state->ca.data = state;
+ result = dvb_ca_en50221_init(
+ &dev->frontends[num].adapter, &state->ca, 0, 1);
+ if (result < 0) {
+ dev_err(&pci_dev->dev,
+ "%s(): dvb_ca_en50221_init result %d\n",
+ __func__, result);
+ return result;
+ }
+ writew(NETUP_UNIDVB_IRQ_CI, (u16 *)(dev->bmmio0 + REG_IMASK_SET));
+ dev_info(&pci_dev->dev,
+ "%s(): CI adapter %d init done\n", __func__, num);
+ return 0;
+}
+
+void netup_unidvb_ci_unregister(struct netup_unidvb_dev *dev, int num)
+{
+ struct netup_ci_state *state;
+
+ dprintk("%s()\n", __func__);
+ if (num < 0 || num > 1) {
+ dev_err(&dev->pci_dev->dev, "%s(): invalid CI adapter %d\n",
+ __func__, num);
+ return;
+ }
+ state = &dev->ci[num];
+ dvb_ca_en50221_release(&state->ca);
+}
+
diff --git a/drivers/media/pci/netup/netup_unidvb_core.c b/drivers/media/pci/netup/netup_unidvb_core.c
new file mode 100644
index 0000000..2670ca0
--- /dev/null
+++ b/drivers/media/pci/netup/netup_unidvb_core.c
@@ -0,0 +1,919 @@
+/*
+ * netup_unidvb_core.c
+ *
+ * Main module for NetUP Universal Dual DVB-CI
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <media/videobuf-vmalloc.h>
+
+#include "netup_unidvb.h"
+#include "cxd2841er.h"
+#include "horus3a.h"
+#include "ascot2e.h"
+#include "lnbh25.h"
+
+MODULE_DESCRIPTION("Driver for NetUP Dual Universal DVB CI PCIe card");
+MODULE_AUTHOR("info@netup.ru");
+MODULE_VERSION(NETUP_UNIDVB_VERSION);
+MODULE_LICENSE("GPL");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define DRIVER_NAME "netup_unidvb"
+
+static int debug;
+module_param(debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+static int spi_enable;
+module_param(spi_enable, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+
+#define dprintk(args...) \
+ do { \
+ if (debug) \
+ dev_dbg(&ndev->pci_dev->dev, args); \
+ } while (0)
+
+static int netup_unidvb_tuner_ctrl(void *priv, int is_dvb_tc);
+
+static struct cxd2841er_config demod_config = {
+ .i2c_addr = 0xc8
+};
+
+static struct horus3a_config horus3a_conf = {
+ .i2c_address = 0xc0,
+ .xtal_freq_mhz = 16,
+ .set_tuner_callback = netup_unidvb_tuner_ctrl
+};
+
+static struct ascot2e_config ascot2e_conf = {
+ .i2c_address = 0xc2,
+ .set_tuner_callback = netup_unidvb_tuner_ctrl
+};
+
+static struct lnbh25_config lnbh25_conf = {
+ .i2c_address = 0x10,
+ .data2_config = LNBH25_TEN | LNBH25_EXTM
+};
+
+static int netup_unidvb_tuner_ctrl(void *priv, int is_dvb_tc)
+{
+ u8 reg, mask;
+ struct netup_dma *dma = priv;
+ struct netup_unidvb_dev *ndev;
+
+ if (!priv)
+ return -EINVAL;
+ dprintk("%s(): num %d is_dvb_tc %d\n",
+ __func__, dma->num, is_dvb_tc);
+ ndev = dma->ndev;
+ reg = readb(ndev->bmmio0 + GPIO_REG_IO);
+ mask = (dma->num == 0) ? GPIO_RFA_CTL : GPIO_RFB_CTL;
+ if (!is_dvb_tc)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writeb(reg, ndev->bmmio0 + GPIO_REG_IO);
+ return 0;
+}
+
+static void netup_unidvb_dev_enable(struct netup_unidvb_dev *ndev)
+{
+ u16 gpio_reg;
+
+ /* enable PCI-E interrupts */
+ writel(AVL_IRQ_ENABLE, ndev->bmmio0 + AVL_PCIE_IENR);
+ /* unreset frontends bits[0:1] */
+ writeb(0x00, ndev->bmmio0 + GPIO_REG_IO);
+ msleep(100);
+ gpio_reg =
+ GPIO_FEA_RESET | GPIO_FEB_RESET |
+ GPIO_FEA_TU_RESET | GPIO_FEB_TU_RESET |
+ GPIO_RFA_CTL | GPIO_RFB_CTL;
+ writeb(gpio_reg, ndev->bmmio0 + GPIO_REG_IO);
+ dev_dbg(&ndev->pci_dev->dev,
+ "%s(): AVL_PCIE_IENR 0x%x GPIO_REG_IO 0x%x\n",
+ __func__, readl(ndev->bmmio0 + AVL_PCIE_IENR),
+ (int)readb(ndev->bmmio0 + GPIO_REG_IO));
+
+}
+
+static void netup_unidvb_dma_enable(struct netup_dma *dma, int enable)
+{
+ u32 irq_mask = (dma->num == 0 ?
+ NETUP_UNIDVB_IRQ_DMA1 : NETUP_UNIDVB_IRQ_DMA2);
+
+ dev_dbg(&dma->ndev->pci_dev->dev,
+ "%s(): DMA%d enable %d\n", __func__, dma->num, enable);
+ if (enable) {
+ writel(BIT_DMA_RUN, &dma->regs->ctrlstat_set);
+ writew(irq_mask,
+ (u16 *)(dma->ndev->bmmio0 + REG_IMASK_SET));
+ } else {
+ writel(BIT_DMA_RUN, &dma->regs->ctrlstat_clear);
+ writew(irq_mask,
+ (u16 *)(dma->ndev->bmmio0 + REG_IMASK_CLEAR));
+ }
+}
+
+irqreturn_t netup_dma_interrupt(struct netup_dma *dma)
+{
+ u64 addr_curr;
+ u32 size;
+ unsigned long flags;
+ struct device *dev = &dma->ndev->pci_dev->dev;
+
+ spin_lock_irqsave(&dma->lock, flags);
+ addr_curr = ((u64)readl(&dma->regs->curr_addr_hi) << 32) |
+ (u64)readl(&dma->regs->curr_addr_lo) | dma->high_addr;
+ /* clear IRQ */
+ writel(BIT_DMA_IRQ, &dma->regs->ctrlstat_clear);
+ /* sanity check */
+ if (addr_curr < dma->addr_phys ||
+ addr_curr > dma->addr_phys + dma->ring_buffer_size) {
+ if (addr_curr != 0) {
+ dev_err(dev, "%s(): DMA current address (0x%llx) not in range 0x%llx - 0x%llx\n",
+ __func__,
+ addr_curr, (u64)dma->addr_phys,
+ (u64)(dma->addr_phys + dma->ring_buffer_size));
+ }
+ goto irq_handled;
+ }
+ size = (addr_curr >= dma->addr_last) ?
+ (u32)(addr_curr - dma->addr_last) :
+ (u32)(dma->ring_buffer_size - (dma->addr_last - addr_curr));
+ if (dma->data_size != 0) {
+ printk_ratelimited("%s(): lost interrupt, data size %d\n",
+ __func__, dma->data_size);
+ dma->data_size += size;
+ }
+ if (dma->data_size == 0 || dma->data_size > dma->ring_buffer_size) {
+ dma->data_size = size;
+ dma->data_offset = (u32)(dma->addr_last - dma->addr_phys);
+ }
+ dma->addr_last = addr_curr;
+ queue_work(dma->ndev->wq, &dma->work);
+irq_handled:
+ spin_unlock_irqrestore(&dma->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t netup_unidvb_isr(int irq, void *dev_id)
+{
+ struct pci_dev *pci_dev = (struct pci_dev *)dev_id;
+ struct netup_unidvb_dev *ndev = pci_get_drvdata(pci_dev);
+ u32 reg40, reg_isr;
+ irqreturn_t iret = IRQ_NONE;
+
+ /* disable interrupts */
+ writel(0, ndev->bmmio0 + AVL_PCIE_IENR);
+ /* check IRQ source */
+ reg40 = readl(ndev->bmmio0 + AVL_PCIE_ISR);
+ if ((reg40 & AVL_IRQ_ASSERTED) != 0) {
+ /* IRQ is being signaled */
+ reg_isr = readw(ndev->bmmio0 + REG_ISR);
+ if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
+ iret = netup_i2c_interrupt(&ndev->i2c[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
+ iret = netup_i2c_interrupt(&ndev->i2c[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_SPI) {
+ iret = netup_spi_interrupt(ndev->spi);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
+ iret = netup_dma_interrupt(&ndev->dma[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
+ iret = netup_dma_interrupt(&ndev->dma[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
+ writew(0x101, ndev->bmmio0 + CAM_CTRLSTAT_CLR);
+ iret = IRQ_HANDLED;
+ } else {
+ dev_err(&pci_dev->dev,
+ "%s(): unknown interrupt 0x%x\n",
+ __func__, reg_isr);
+ }
+ }
+ /* re-enable interrupts */
+ writel(AVL_IRQ_ENABLE, ndev->bmmio0 + AVL_PCIE_IENR);
+ return iret;
+}
+
+static int netup_unidvb_buf_setup(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size)
+{
+ struct netup_dma *dma = q->priv_data;
+ struct netup_unidvb_dev *ndev = dma->ndev;
+
+ dprintk("%s()\n", __func__);
+ *count = NETUP_DMA_BLOCKS_COUNT * 10;
+ *size = NETUP_DMA_PACKETS_COUNT * 188;
+ return 0;
+}
+
+static int netup_unidvb_buf_prepare(struct videobuf_queue *q,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct netup_dma *dma = q->priv_data;
+ struct device *dev = &dma->ndev->pci_dev->dev;
+ struct netup_unidvb_buffer *buf = (struct netup_unidvb_buffer *)vb;
+
+ dev_dbg(dev, "%s(): %p\n", __func__, buf);
+ if (buf->vb.baddr != 0 &&
+ buf->vb.size < NETUP_DMA_PACKETS_COUNT * 188) {
+ dev_err(dev, "%s(): invalid buffer size %d\n",
+ __func__, (unsigned int)buf->vb.size);
+ return -EINVAL;
+ }
+ if (buf->vb.state == VIDEOBUF_NEEDS_INIT) {
+ buf->vb.width = 188;
+ buf->vb.height = NETUP_DMA_PACKETS_COUNT;
+ buf->vb.size = NETUP_DMA_PACKETS_COUNT * 188;
+ buf->vb.field = field;
+ if (videobuf_iolock(q, &buf->vb, NULL)) {
+ dev_err(dev, "%s(): unable to lock buffer\n",
+ __func__);
+ return -EINVAL;
+ }
+ }
+ buf->vb.state = VIDEOBUF_PREPARED;
+ buf->size = 0;
+ return 0;
+}
+
+static void netup_unidvb_buf_queue(struct videobuf_queue *q,
+ struct videobuf_buffer *vb)
+{
+ struct netup_dma *dma = q->priv_data;
+ struct device *dev = &dma->ndev->pci_dev->dev;
+ struct netup_unidvb_buffer *buf = (struct netup_unidvb_buffer *)vb;
+
+ dev_dbg(dev, "%s(): %p\n", __func__, buf);
+ buf->vb.state = VIDEOBUF_ACTIVE;
+ buf->size = 0;
+ list_add_tail(&buf->vb.queue, &dma->free_buffers);
+ mod_timer(&dma->timeout, jiffies + HZ);
+}
+
+static void netup_unidvb_buf_release(struct videobuf_queue *q,
+ struct videobuf_buffer *vb)
+{
+ struct netup_dma *dma = q->priv_data;
+ struct device *dev = &dma->ndev->pci_dev->dev;
+ struct netup_unidvb_buffer *buf = (struct netup_unidvb_buffer *)vb;
+
+ dev_dbg(dev, "%s(): %p\n", __func__, buf);
+ videobuf_waiton(q, &buf->vb, 0, 0);
+ videobuf_vmalloc_free(&buf->vb);
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops dvb_qops = {
+ .buf_setup = netup_unidvb_buf_setup,
+ .buf_prepare = netup_unidvb_buf_prepare,
+ .buf_queue = netup_unidvb_buf_queue,
+ .buf_release = netup_unidvb_buf_release,
+};
+
+static int netup_unidvb_dvb_init(
+ struct netup_unidvb_dev *ndev, int num)
+{
+ struct videobuf_dvb_frontend *fe0, *fe1, *fe2;
+
+ if (num < 0 || num > 1) {
+ dprintk("%s(): unable to init DVB bus %d\n",
+ __func__, num);
+ return -ENODEV;
+ }
+ mutex_init(&ndev->frontends[num].lock);
+ INIT_LIST_HEAD(&ndev->frontends[num].felist);
+ if (videobuf_dvb_alloc_frontend(
+ &ndev->frontends[num], 1) == NULL ||
+ videobuf_dvb_alloc_frontend(
+ &ndev->frontends[num], 2) == NULL ||
+ videobuf_dvb_alloc_frontend(
+ &ndev->frontends[num], 3) == NULL) {
+ dprintk("%s(): unabto to alllocate videobuf_dvb_frontend\n",
+ __func__);
+ return -ENOMEM;
+ }
+ fe0 = videobuf_dvb_get_frontend(&ndev->frontends[num], 1);
+ fe1 = videobuf_dvb_get_frontend(&ndev->frontends[num], 2);
+ fe2 = videobuf_dvb_get_frontend(&ndev->frontends[num], 3);
+ if (fe0 == NULL || fe1 == NULL || fe2 == NULL) {
+ dprintk("%s(): frontends has not been allocated\n",
+ __func__);
+ return -EINVAL;
+ }
+ fe0->dvb.name = "netup_fe0";
+ fe1->dvb.name = "netup_fe1";
+ fe2->dvb.name = "netup_fe2";
+ videobuf_queue_vmalloc_init(&fe0->dvb.dvbq, &dvb_qops,
+ &ndev->pci_dev->dev, &ndev->dma[num].lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
+ sizeof(struct netup_unidvb_buffer), &ndev->dma[num], NULL);
+ videobuf_queue_vmalloc_init(&fe1->dvb.dvbq, &dvb_qops,
+ &ndev->pci_dev->dev, &ndev->dma[num].lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
+ sizeof(struct netup_unidvb_buffer), &ndev->dma[num], NULL);
+ videobuf_queue_vmalloc_init(&fe2->dvb.dvbq, &dvb_qops,
+ &ndev->pci_dev->dev, &ndev->dma[num].lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
+ sizeof(struct netup_unidvb_buffer), &ndev->dma[num], NULL);
+ fe0->dvb.frontend = dvb_attach(
+ cxd2841er_attach_s, &demod_config, &ndev->i2c[num].adap);
+ if (fe0->dvb.frontend == NULL) {
+ dprintk("%s(): unable to attach DVB-S/S2 frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ horus3a_conf.set_tuner_priv = &ndev->dma[num];
+ if (!dvb_attach(horus3a_attach, fe0->dvb.frontend,
+ &horus3a_conf, &ndev->i2c[num].adap)) {
+ dprintk("%s(): unable to attach DVB-S/S2 tuner frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ if (!dvb_attach(lnbh25_attach, fe0->dvb.frontend,
+ &lnbh25_conf, &ndev->i2c[num].adap)) {
+ dprintk("%s(): unable to attach SEC frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ /* DVB-T/T2 frontend */
+ fe1->dvb.frontend = dvb_attach(
+ cxd2841er_attach_t, &demod_config, &ndev->i2c[num].adap);
+ if (fe1->dvb.frontend == NULL) {
+ dprintk("%s(): unable to attach DVB-T frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ fe1->dvb.frontend->id = 1;
+ ascot2e_conf.set_tuner_priv = &ndev->dma[num];
+ if (!dvb_attach(ascot2e_attach, fe1->dvb.frontend,
+ &ascot2e_conf, &ndev->i2c[num].adap)) {
+ dprintk("%s(): unable to attach DVB-T tuner frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ /* DVB-C/C2 frontend */
+ fe2->dvb.frontend = dvb_attach(
+ cxd2841er_attach_c, &demod_config, &ndev->i2c[num].adap);
+ if (fe2->dvb.frontend == NULL) {
+ dprintk("%s(): unable to attach DVB-C frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+ fe2->dvb.frontend->id = 2;
+ if (!dvb_attach(ascot2e_attach, fe2->dvb.frontend,
+ &ascot2e_conf, &ndev->i2c[num].adap)) {
+ dprintk("%s(): unable to attach DVB-T/C tuner frontend\n",
+ __func__);
+ goto frontend_detach;
+ }
+
+ if (videobuf_dvb_register_bus(
+ &ndev->frontends[num], THIS_MODULE, NULL,
+ &ndev->pci_dev->dev, adapter_nr, 1)) {
+ dprintk("%s(): unable to register DVB bus %d\n",
+ __func__, num);
+ goto frontend_detach;
+ }
+ dev_info(&ndev->pci_dev->dev, "DVB init done, num=%d\n", num);
+ return 0;
+frontend_detach:
+ videobuf_dvb_dealloc_frontends(&ndev->frontends[num]);
+ return -EINVAL;
+}
+
+static void netup_unidvb_dvb_fini(struct netup_unidvb_dev *ndev, int num)
+{
+ if (num < 0 || num > 1) {
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): unable to unregister DVB bus %d\n",
+ __func__, num);
+ return;
+ }
+ videobuf_dvb_unregister_bus(&ndev->frontends[num]);
+ dev_info(&ndev->pci_dev->dev,
+ "%s(): DVB bus %d unregistered\n", __func__, num);
+}
+
+static int netup_unidvb_dvb_setup(struct netup_unidvb_dev *ndev)
+{
+ int res;
+
+ res = netup_unidvb_dvb_init(ndev, 0);
+ if (res)
+ return res;
+ res = netup_unidvb_dvb_init(ndev, 1);
+ if (res) {
+ netup_unidvb_dvb_fini(ndev, 0);
+ return res;
+ }
+ return 0;
+}
+
+static int netup_unidvb_ring_copy(
+ struct netup_dma *dma, struct netup_unidvb_buffer *buf)
+{
+ u32 copy_bytes, ring_bytes, buff_bytes = buf->vb.size - buf->size;
+ u8 *p = videobuf_to_vmalloc(&buf->vb) + buf->size;
+ struct netup_unidvb_dev *ndev = dma->ndev;
+
+ if (p == NULL) {
+ dprintk("%s(): buffer is NULL\n", __func__);
+ return -EINVAL;
+ }
+ if (dma->data_offset + dma->data_size > dma->ring_buffer_size) {
+ ring_bytes = dma->ring_buffer_size - dma->data_offset;
+ copy_bytes = (ring_bytes > buff_bytes) ?
+ buff_bytes : ring_bytes;
+ memcpy_fromio(p, dma->addr_virt + dma->data_offset, copy_bytes);
+ p += copy_bytes;
+ buf->size += copy_bytes;
+ buff_bytes -= copy_bytes;
+ dma->data_size -= copy_bytes;
+ dma->data_offset += copy_bytes;
+ if (dma->data_offset == dma->ring_buffer_size)
+ dma->data_offset = 0;
+ }
+ if (buff_bytes > 0) {
+ ring_bytes = dma->data_size;
+ copy_bytes = (ring_bytes > buff_bytes) ?
+ buff_bytes : ring_bytes;
+ memcpy_fromio(p, dma->addr_virt + dma->data_offset, copy_bytes);
+ buf->size += copy_bytes;
+ dma->data_size -= copy_bytes;
+ dma->data_offset += copy_bytes;
+ if (dma->data_offset == dma->ring_buffer_size)
+ dma->data_offset = 0;
+ }
+ return 0;
+}
+
+static void netup_unidvb_dma_worker(struct work_struct *work)
+{
+ struct netup_dma *dma = container_of(work, struct netup_dma, work);
+ struct netup_unidvb_dev *ndev = dma->ndev;
+ struct netup_unidvb_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma->lock, flags);
+ if (dma->data_size == 0) {
+ dprintk("%s(): data_size == 0\n", __func__);
+ goto work_done;
+ }
+ while (dma->data_size > 0) {
+ if (list_empty(&dma->free_buffers)) {
+ dprintk("%s(): no free buffers\n", __func__);
+ goto work_done;
+ }
+ buf = list_first_entry(&dma->free_buffers,
+ struct netup_unidvb_buffer, vb.queue);
+ if (buf->vb.size != NETUP_DMA_PACKETS_COUNT * 188) {
+ dprintk("%s(): invalid buffer size %d\n",
+ __func__, (unsigned int)buf->vb.size);
+ goto work_done;
+ }
+ if (buf->size >= buf->vb.size) {
+ dprintk("%s(): buffer overflow, size %d\n",
+ __func__, buf->size);
+ goto work_done;
+ }
+ if (netup_unidvb_ring_copy(dma, buf))
+ goto work_done;
+ if (buf->size == buf->vb.size) {
+ list_del(&buf->vb.queue);
+ do_gettimeofday(&buf->vb.ts);
+ buf->vb.state = VIDEOBUF_DONE;
+ wake_up(&buf->vb.done);
+ }
+ }
+work_done:
+ dma->data_size = 0;
+ spin_unlock_irqrestore(&dma->lock, flags);
+}
+
+static void netup_unidvb_dma_timeout(unsigned long data)
+{
+ struct netup_dma *dma = (struct netup_dma *)data;
+ struct netup_unidvb_dev *ndev = dma->ndev;
+ struct netup_unidvb_buffer *buf;
+ unsigned long flags;
+
+ dprintk("%s()\n", __func__);
+ spin_lock_irqsave(&dma->lock, flags);
+ while (!list_empty(&dma->free_buffers)) {
+ buf = list_first_entry(&dma->free_buffers,
+ struct netup_unidvb_buffer, vb.queue);
+ list_del(&buf->vb.queue);
+ buf->vb.state = VIDEOBUF_ERROR;
+ wake_up(&buf->vb.done);
+ }
+ spin_unlock_irqrestore(&dma->lock, flags);
+}
+
+static int netup_unidvb_dma_init(struct netup_unidvb_dev *ndev, int num)
+{
+ struct netup_dma *dma;
+ struct device *dev = &ndev->pci_dev->dev;
+
+ if (num < 0 || num > 1) {
+ dev_err(dev, "%s(): unable to register DMA%d\n",
+ __func__, num);
+ return -ENODEV;
+ }
+ dma = &ndev->dma[num];
+ dev_info(dev, "%s(): starting DMA%d\n", __func__, num);
+ dma->num = num;
+ dma->ndev = ndev;
+ spin_lock_init(&dma->lock);
+ INIT_WORK(&dma->work, netup_unidvb_dma_worker);
+ INIT_LIST_HEAD(&dma->free_buffers);
+ dma->timeout.function = netup_unidvb_dma_timeout;
+ dma->timeout.data = (unsigned long)dma;
+ init_timer(&dma->timeout);
+ dma->ring_buffer_size =
+ NETUP_DMA_BLOCKS_COUNT * NETUP_DMA_PACKETS_COUNT * 188;
+ dma->addr_virt = dma_alloc_coherent(
+ &ndev->pci_dev->dev, dma->ring_buffer_size,
+ &dma->addr_phys, GFP_KERNEL);
+ if (!dma->addr_virt) {
+ dev_err(dev, "%s(): unable to allocate DMA%d buffer\n",
+ __func__, num);
+ return -ENOMEM;
+ }
+ dev_info(dev, "%s(): DMA%d buffer virt/phys 0x%p/0x%llx size %d\n",
+ __func__, num, dma->addr_virt,
+ (unsigned long long)dma->addr_phys,
+ dma->ring_buffer_size);
+ memset_io(dma->addr_virt, 0, dma->ring_buffer_size);
+ dma->addr_last = dma->addr_phys;
+ dma->high_addr = (u32)(dma->addr_phys & 0xC0000000);
+ dma->regs = (struct netup_dma_regs *)(num == 0 ?
+ ndev->bmmio0 + NETUP_DMA0_ADDR :
+ ndev->bmmio0 + NETUP_DMA1_ADDR);
+ writel((NETUP_DMA_BLOCKS_COUNT << 24) |
+ (NETUP_DMA_PACKETS_COUNT << 8) | 188, &dma->regs->size);
+ writel((u32)(dma->addr_phys & 0x3FFFFFFF), &dma->regs->start_addr_lo);
+ writel((u32)((u64)dma->addr_phys >> 32), &dma->regs->start_addr_hi);
+ writel(375000000, &dma->regs->timeout);
+ msleep(1000);
+ writel(BIT_DMA_IRQ, &dma->regs->ctrlstat_clear);
+ writel(dma->high_addr, ndev->bmmio0 + 0x1000);
+ return 0;
+}
+
+static void netup_unidvb_dma_fini(struct netup_unidvb_dev *ndev, int num)
+{
+ struct netup_dma *dma;
+
+ if (num < 0 || num > 1)
+ return;
+ dprintk("%s(): num %d\n", __func__, num);
+ dma = &ndev->dma[num];
+ netup_unidvb_dma_enable(dma, 0);
+ msleep(50);
+ cancel_work_sync(&dma->work);
+ del_timer(&dma->timeout);
+ dma_free_coherent(
+ &ndev->pci_dev->dev, dma->ring_buffer_size,
+ dma->addr_virt, dma->addr_phys);
+}
+
+static int netup_unidvb_dma_setup(struct netup_unidvb_dev *ndev)
+{
+ int res;
+
+ res = netup_unidvb_dma_init(ndev, 0);
+ if (res)
+ return res;
+ res = netup_unidvb_dma_init(ndev, 1);
+ if (res) {
+ netup_unidvb_dma_fini(ndev, 0);
+ return res;
+ }
+ netup_unidvb_dma_enable(&ndev->dma[0], 1);
+ netup_unidvb_dma_enable(&ndev->dma[1], 1);
+ return 0;
+}
+
+static int netup_unidvb_ci_setup(
+ struct netup_unidvb_dev *ndev, struct pci_dev *pci_dev)
+{
+ int res;
+
+ writew(NETUP_UNIDVB_IRQ_CI, ndev->bmmio0 + REG_IMASK_SET);
+ res = netup_unidvb_ci_register(ndev, 0, pci_dev);
+ if (res)
+ return res;
+ res = netup_unidvb_ci_register(ndev, 1, pci_dev);
+ if (res)
+ netup_unidvb_ci_unregister(ndev, 0);
+ return res;
+}
+
+static int netup_unidvb_request_mmio(struct pci_dev *pci_dev)
+{
+ if (!request_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0), DRIVER_NAME)) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to request MMIO bar 0 at 0x%llx\n",
+ __func__,
+ (unsigned long long)pci_resource_start(pci_dev, 0));
+ return -EBUSY;
+ }
+ if (!request_mem_region(pci_resource_start(pci_dev, 1),
+ pci_resource_len(pci_dev, 1), DRIVER_NAME)) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to request MMIO bar 1 at 0x%llx\n",
+ __func__,
+ (unsigned long long)pci_resource_start(pci_dev, 1));
+ release_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int netup_unidvb_request_modules(struct device *dev)
+{
+ static const char * const modules[] = {
+ "lnbh25", "ascot2e", "horus3a", "cxd2841er", NULL
+ };
+ const char * const *curr_mod = modules;
+ int err;
+
+ while (*curr_mod != NULL) {
+ err = request_module(*curr_mod);
+ if (err) {
+ dev_warn(dev, "request_module(%s) failed: %d\n",
+ *curr_mod, err);
+ }
+ ++curr_mod;
+ }
+ return 0;
+}
+
+static int netup_unidvb_initdev(
+ struct pci_dev *pci_dev, const struct pci_device_id *pci_id)
+{
+ u8 board_revision;
+ u16 board_vendor;
+ struct netup_unidvb_dev *ndev;
+ int old_firmware = 0;
+
+ netup_unidvb_request_modules(&pci_dev->dev);
+
+ /* Check card revision */
+ if (pci_dev->revision != NETUP_PCI_DEV_REVISION) {
+ dev_err(&pci_dev->dev,
+ "netup_unidvb: expected card revision %d, got %d\n",
+ NETUP_PCI_DEV_REVISION, pci_dev->revision);
+ dev_err(&pci_dev->dev,
+ "Please upgrade firmware!\n");
+ dev_err(&pci_dev->dev,
+ "Instructions on http://www.netup.tv\n");
+ old_firmware = 1;
+ spi_enable = 1;
+ }
+
+ /* allocate device context */
+ ndev = kzalloc(sizeof(*ndev), GFP_KERNEL);
+
+ if (!ndev)
+ goto dev_alloc_err;
+ memset(ndev, 0, sizeof(*ndev));
+ ndev->old_fw = old_firmware;
+ ndev->wq = create_singlethread_workqueue(DRIVER_NAME);
+ if (!ndev->wq) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to create workqueue\n", __func__);
+ goto wq_create_err;
+ }
+ ndev->pci_dev = pci_dev;
+ ndev->pci_bus = pci_dev->bus->number;
+ ndev->pci_slot = PCI_SLOT(pci_dev->devfn);
+ ndev->pci_func = PCI_FUNC(pci_dev->devfn);
+ ndev->board_num = ndev->pci_bus*10 + ndev->pci_slot;
+ pci_set_drvdata(pci_dev, ndev);
+ /* PCI init */
+ dev_info(&pci_dev->dev, "%s(): PCI device (%d). Bus:0x%x Slot:0x%x\n",
+ __func__, ndev->board_num, ndev->pci_bus, ndev->pci_slot);
+
+ if (pci_enable_device(pci_dev)) {
+ dev_err(&pci_dev->dev, "%s(): pci_enable_device failed\n",
+ __func__);
+ goto pci_enable_err;
+ }
+ /* read PCI info */
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &board_revision);
+ pci_read_config_word(pci_dev, PCI_VENDOR_ID, &board_vendor);
+ if (board_vendor != NETUP_VENDOR_ID) {
+ dev_err(&pci_dev->dev, "%s(): unknown board vendor 0x%x",
+ __func__, board_vendor);
+ goto pci_detect_err;
+ }
+ dev_info(&pci_dev->dev,
+ "%s(): board vendor 0x%x, revision 0x%x\n",
+ __func__, board_vendor, board_revision);
+ pci_set_master(pci_dev);
+ if (!pci_dma_supported(pci_dev, 0xffffffff)) {
+ dev_err(&pci_dev->dev, "%s(): 32bit PCI DMA is not supported\n",
+ __func__);
+ goto pci_detect_err;
+ }
+ dev_info(&pci_dev->dev, "%s(): using 32bit PCI DMA\n", __func__);
+ /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */
+ pcie_capability_clear_and_set_word(pci_dev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN |
+ PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
+ /* Adjust PCIe completion timeout. */
+ pcie_capability_clear_and_set_word(
+ pci_dev, PCI_EXP_DEVCTL2, 0xf, 0x2);
+
+ if (netup_unidvb_request_mmio(pci_dev)) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to request MMIO regions\n", __func__);
+ goto pci_detect_err;
+ }
+ ndev->lmmio0 = ioremap(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ if (!ndev->lmmio0) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to remap MMIO bar 0\n", __func__);
+ goto pci_bar0_error;
+ }
+ ndev->lmmio1 = ioremap(pci_resource_start(pci_dev, 1),
+ pci_resource_len(pci_dev, 1));
+ if (!ndev->lmmio1) {
+ dev_err(&pci_dev->dev,
+ "%s(): unable to remap MMIO bar 1\n", __func__);
+ goto pci_bar1_error;
+ }
+ ndev->bmmio0 = (u8 __iomem *)ndev->lmmio0;
+ ndev->bmmio1 = (u8 __iomem *)ndev->lmmio1;
+ dev_info(&pci_dev->dev,
+ "%s(): PCI MMIO at 0x%p (%d); 0x%p (%d); IRQ %d",
+ __func__,
+ ndev->lmmio0, (u32)pci_resource_len(pci_dev, 0),
+ ndev->lmmio1, (u32)pci_resource_len(pci_dev, 1),
+ pci_dev->irq);
+ if (request_irq(pci_dev->irq, netup_unidvb_isr,
+ IRQF_SHARED | IRQF_DISABLED,
+ "netup_unidvb", pci_dev) < 0) {
+ dev_err(&pci_dev->dev,
+ "%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
+ goto irq_request_err;
+ }
+ netup_unidvb_dev_enable(ndev);
+ if (spi_enable && netup_spi_init(ndev)) {
+ dev_warn(&pci_dev->dev,
+ "netup_unidvb: SPI flash setup failed\n");
+ goto spi_setup_err;
+ }
+ if (old_firmware) {
+ dev_err(&pci_dev->dev,
+ "netup_unidvb: card initialization was incomplete\n");
+ return 0;
+ }
+ if (netup_i2c_register(ndev)) {
+ dev_err(&pci_dev->dev, "netup_unidvb: I2C setup failed\n");
+ goto i2c_setup_err;
+ }
+ /* enable I2C IRQs */
+ writew(NETUP_UNIDVB_IRQ_I2C0 | NETUP_UNIDVB_IRQ_I2C1,
+ ndev->bmmio0 + REG_IMASK_SET);
+ usleep_range(5000, 10000);
+ if (netup_unidvb_dvb_setup(ndev)) {
+ dev_err(&pci_dev->dev, "netup_unidvb: DVB setup failed\n");
+ goto dvb_setup_err;
+ }
+ if (netup_unidvb_ci_setup(ndev, pci_dev)) {
+ dev_err(&pci_dev->dev, "netup_unidvb: CI setup failed\n");
+ goto ci_setup_err;
+ }
+ if (netup_unidvb_dma_setup(ndev)) {
+ dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n");
+ goto dma_setup_err;
+ }
+ dev_info(&pci_dev->dev, "netup_unidvb: device has been initialized\n");
+ return 0;
+dma_setup_err:
+ netup_unidvb_ci_unregister(ndev, 0);
+ netup_unidvb_ci_unregister(ndev, 1);
+ci_setup_err:
+ netup_unidvb_dvb_fini(ndev, 0);
+ netup_unidvb_dvb_fini(ndev, 1);
+dvb_setup_err:
+ netup_i2c_unregister(ndev);
+i2c_setup_err:
+ if (ndev->spi)
+ netup_spi_release(ndev);
+spi_setup_err:
+ free_irq(pci_dev->irq, pci_dev);
+irq_request_err:
+ iounmap(ndev->lmmio1);
+pci_bar1_error:
+ iounmap(ndev->lmmio0);
+pci_bar0_error:
+ release_mem_region(
+ pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ release_mem_region(
+ pci_resource_start(pci_dev, 1),
+ pci_resource_len(pci_dev, 1));
+pci_detect_err:
+ pci_disable_device(pci_dev);
+pci_enable_err:
+ pci_set_drvdata(pci_dev, NULL);
+ destroy_workqueue(ndev->wq);
+wq_create_err:
+ kfree(ndev);
+dev_alloc_err:
+ dev_err(&pci_dev->dev,
+ "%s(): failed to initizalize device\n", __func__);
+ return -EIO;
+}
+
+static void netup_unidvb_finidev(struct pci_dev *pci_dev)
+{
+ struct netup_unidvb_dev *ndev = pci_get_drvdata(pci_dev);
+
+ dev_info(&pci_dev->dev, "%s(): trying to stop device\n", __func__);
+ if (!ndev->old_fw) {
+ netup_unidvb_dma_fini(ndev, 0);
+ netup_unidvb_dma_fini(ndev, 1);
+ netup_unidvb_ci_unregister(ndev, 0);
+ netup_unidvb_ci_unregister(ndev, 1);
+ netup_unidvb_dvb_fini(ndev, 0);
+ netup_unidvb_dvb_fini(ndev, 1);
+ netup_i2c_unregister(ndev);
+ }
+ if (ndev->spi)
+ netup_spi_release(ndev);
+ writew(0xffff, ndev->bmmio0 + REG_IMASK_CLEAR);
+ free_irq(pci_dev->irq, pci_dev);
+ iounmap(ndev->lmmio0);
+ iounmap(ndev->lmmio1);
+ release_mem_region(
+ pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ release_mem_region(
+ pci_resource_start(pci_dev, 1),
+ pci_resource_len(pci_dev, 1));
+ pci_disable_device(pci_dev);
+ pci_set_drvdata(pci_dev, NULL);
+ destroy_workqueue(ndev->wq);
+ kfree(ndev);
+ dev_info(&pci_dev->dev,
+ "%s(): device has been successfully stopped\n", __func__);
+}
+
+
+static struct pci_device_id netup_unidvb_pci_tbl[] = {
+ { PCI_DEVICE(0x1b55, 0x18f6) },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, netup_unidvb_pci_tbl);
+
+static struct pci_driver netup_unidvb_pci_driver = {
+ .name = "netup_unidvb",
+ .id_table = netup_unidvb_pci_tbl,
+ .probe = netup_unidvb_initdev,
+ .remove = netup_unidvb_finidev,
+ .suspend = NULL,
+ .resume = NULL,
+};
+
+static int __init netup_unidvb_init(void)
+{
+ return pci_register_driver(&netup_unidvb_pci_driver);
+}
+
+static void __exit netup_unidvb_fini(void)
+{
+ pci_unregister_driver(&netup_unidvb_pci_driver);
+}
+
+module_init(netup_unidvb_init);
+module_exit(netup_unidvb_fini);
diff --git a/drivers/media/pci/netup/netup_unidvb_i2c.c b/drivers/media/pci/netup/netup_unidvb_i2c.c
new file mode 100644
index 0000000..7ebe652
--- /dev/null
+++ b/drivers/media/pci/netup/netup_unidvb_i2c.c
@@ -0,0 +1,350 @@
+/*
+ * netup_unidvb_i2c.c
+ *
+ * Internal I2C bus driver for NetUP Universal Dual DVB-CI
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include "netup_unidvb.h"
+
+static int i2c_debug;
+module_param(i2c_debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(i2c_debug, "Debug NetUP I2C (default:no)");
+
+#define dprintk(args...) \
+do { \
+ if (i2c_debug) \
+ dev_dbg(i2c->adap.dev.parent, args); \
+} while (0)
+
+/* twi_ctrl0_stat reg bits */
+#define TWI_IRQEN_COMPL 0x1
+#define TWI_IRQEN_ANACK 0x2
+#define TWI_IRQEN_DNACK 0x4
+#define TWI_IRQ_COMPL (TWI_IRQEN_COMPL << 8)
+#define TWI_IRQ_ANACK (TWI_IRQEN_ANACK << 8)
+#define TWI_IRQ_DNACK (TWI_IRQEN_DNACK << 8)
+#define TWI_IRQ_TX 0x800
+#define TWI_IRQ_RX 0x1000
+#define TWI_IRQEN (TWI_IRQEN_COMPL | TWI_IRQEN_ANACK | TWI_IRQEN_DNACK)
+/* twi_addr_ctrl1 reg bits*/
+#define TWI_TRANSFER 0x100
+#define TWI_NOSTOP 0x200
+#define TWI_SOFT_RESET 0x2000
+/* twi_clkdiv reg value */
+#define TWI_CLKDIV 156
+/* fifo_stat_ctrl reg bits */
+#define FIFO_IRQEN 0x8000
+#define FIFO_RESET 0x4000
+
+#define FIFO_SIZE 16
+
+irqreturn_t netup_i2c_interrupt(struct netup_i2c *i2c)
+{
+ u16 reg, tmp;
+ unsigned long flags;
+ irqreturn_t iret = IRQ_HANDLED;
+
+ spin_lock_irqsave(&i2c->lock, flags);
+ reg = readw(&i2c->regs->twi_ctrl0_stat);
+ writew(reg & ~TWI_IRQEN, &i2c->regs->twi_ctrl0_stat);
+ dprintk("%s(): twi_ctrl0_state 0x%x\n", __func__, reg);
+ if ((reg & TWI_IRQEN_COMPL) != 0 && (reg & TWI_IRQ_COMPL)) {
+ dprintk("%s(): TWI_IRQEN_COMPL\n", __func__);
+ i2c->state = STATE_DONE;
+ goto irq_ok;
+ }
+ if ((reg & TWI_IRQEN_ANACK) != 0 && (reg & TWI_IRQ_ANACK)) {
+ dprintk("%s(): TWI_IRQEN_ANACK\n", __func__);
+ i2c->state = STATE_ERROR;
+ goto irq_ok;
+ }
+ if ((reg & TWI_IRQEN_DNACK) != 0 && (reg & TWI_IRQ_DNACK)) {
+ dprintk("%s(): TWI_IRQEN_DNACK\n", __func__);
+ i2c->state = STATE_ERROR;
+ goto irq_ok;
+ }
+ if ((reg & TWI_IRQ_RX) != 0) {
+ tmp = readw(&i2c->regs->rx_fifo.stat_ctrl);
+ writew(tmp & ~FIFO_IRQEN, &i2c->regs->rx_fifo.stat_ctrl);
+ i2c->state = STATE_WANT_READ;
+ dprintk("%s(): want read\n", __func__);
+ goto irq_ok;
+ }
+ if ((reg & TWI_IRQ_TX) != 0) {
+ tmp = readw(&i2c->regs->tx_fifo.stat_ctrl);
+ writew(tmp & ~FIFO_IRQEN, &i2c->regs->tx_fifo.stat_ctrl);
+ i2c->state = STATE_WANT_WRITE;
+ dprintk("%s(): want write\n", __func__);
+ goto irq_ok;
+ }
+ dev_warn(&i2c->adap.dev, "%s(): not mine interrupt\n", __func__);
+ iret = IRQ_NONE;
+irq_ok:
+ spin_unlock_irqrestore(&i2c->lock, flags);
+ if (iret == IRQ_HANDLED)
+ wake_up(&i2c->wq);
+ return iret;
+}
+
+static void netup_i2c_reset(struct netup_i2c *i2c)
+{
+ dprintk("%s()\n", __func__);
+ i2c->state = STATE_DONE;
+ writew(TWI_SOFT_RESET, &i2c->regs->twi_addr_ctrl1);
+ writew(TWI_CLKDIV, &i2c->regs->clkdiv);
+ writew(FIFO_RESET, &i2c->regs->tx_fifo.stat_ctrl);
+ writew(FIFO_RESET, &i2c->regs->rx_fifo.stat_ctrl);
+ writew(0x800, &i2c->regs->tx_fifo.stat_ctrl);
+ writew(0x800, &i2c->regs->rx_fifo.stat_ctrl);
+}
+
+static void netup_i2c_fifo_tx(struct netup_i2c *i2c)
+{
+ u8 data;
+ u32 fifo_space = FIFO_SIZE -
+ (readw(&i2c->regs->tx_fifo.stat_ctrl) & 0x3f);
+ u32 msg_length = i2c->msg->len - i2c->xmit_size;
+
+ msg_length = (msg_length < fifo_space ? msg_length : fifo_space);
+ while (msg_length--) {
+ data = i2c->msg->buf[i2c->xmit_size++];
+ writeb(data, &i2c->regs->tx_fifo.data8);
+ dprintk("%s(): write 0x%02x\n", __func__, data);
+ }
+ if (i2c->xmit_size < i2c->msg->len) {
+ dprintk("%s(): TX IRQ enabled\n", __func__);
+ writew(readw(&i2c->regs->tx_fifo.stat_ctrl) | FIFO_IRQEN,
+ &i2c->regs->tx_fifo.stat_ctrl);
+ }
+}
+
+static void netup_i2c_fifo_rx(struct netup_i2c *i2c)
+{
+ u8 data;
+ u32 fifo_size = readw(&i2c->regs->rx_fifo.stat_ctrl) & 0x3f;
+
+ dprintk("%s(): RX fifo size %d\n", __func__, fifo_size);
+ while (fifo_size--) {
+ data = readb(&i2c->regs->rx_fifo.data8);
+ if ((i2c->msg->flags & I2C_M_RD) != 0 &&
+ i2c->xmit_size < i2c->msg->len) {
+ i2c->msg->buf[i2c->xmit_size++] = data;
+ dprintk("%s(): read 0x%02x\n", __func__, data);
+ }
+ }
+ if (i2c->xmit_size < i2c->msg->len) {
+ dprintk("%s(): RX IRQ enabled\n", __func__);
+ writew(readw(&i2c->regs->rx_fifo.stat_ctrl) | FIFO_IRQEN,
+ &i2c->regs->rx_fifo.stat_ctrl);
+ }
+}
+
+static void netup_i2c_start_xfer(struct netup_i2c *i2c)
+{
+ u16 rdflag = ((i2c->msg->flags & I2C_M_RD) ? 1 : 0);
+ u16 reg = readw(&i2c->regs->twi_ctrl0_stat);
+
+ writew(TWI_IRQEN | reg, &i2c->regs->twi_ctrl0_stat);
+ writew(i2c->msg->len, &i2c->regs->length);
+ writew(TWI_TRANSFER | (i2c->msg->addr << 1) | rdflag,
+ &i2c->regs->twi_addr_ctrl1);
+ dprintk("%s(): length %d twi_addr_ctrl1 0x%x twi_ctrl0_stat 0x%x\n",
+ __func__,
+ readw(&i2c->regs->length),
+ readw(&i2c->regs->twi_addr_ctrl1),
+ readw(&i2c->regs->twi_ctrl0_stat));
+ i2c->state = STATE_WAIT;
+ i2c->xmit_size = 0;
+ if (!rdflag)
+ netup_i2c_fifo_tx(i2c);
+ else
+ writew(FIFO_IRQEN | readw(&i2c->regs->rx_fifo.stat_ctrl),
+ &i2c->regs->rx_fifo.stat_ctrl);
+}
+
+static int netup_i2c_xfer(
+ struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ unsigned long flags;
+ int i, trans_done, res = num;
+ struct netup_i2c *i2c = i2c_get_adapdata(adap);
+ u16 reg;
+
+ if (num <= 0) {
+ dprintk("%s(): num == %d\n", __func__, num);
+ return -EINVAL;
+ }
+ spin_lock_irqsave(&i2c->lock, flags);
+ if (i2c->state != STATE_DONE) {
+ dprintk("%s(): i2c->state == %d, resetting I2C\n",
+ __func__, i2c->state);
+ netup_i2c_reset(i2c);
+ }
+ dprintk("%s() num %d\n", __func__, num);
+ for (i = 0; i < num; i++) {
+ i2c->msg = &msgs[i];
+ netup_i2c_start_xfer(i2c);
+ trans_done = 0;
+ while (!trans_done) {
+ spin_unlock_irqrestore(&i2c->lock, flags);
+ if (wait_event_timeout(
+ i2c->wq,
+ i2c->state != STATE_WAIT,
+ NETUP_I2C_TIMEOUT)) {
+ spin_lock_irqsave(&i2c->lock, flags);
+ switch (i2c->state) {
+ case STATE_WANT_READ:
+ netup_i2c_fifo_rx(i2c);
+ break;
+ case STATE_WANT_WRITE:
+ netup_i2c_fifo_tx(i2c);
+ break;
+ case STATE_DONE:
+ if ((i2c->msg->flags & I2C_M_RD) != 0 &&
+ i2c->xmit_size != i2c->msg->len)
+ netup_i2c_fifo_rx(i2c);
+ dprintk("%s(): msg %d OK\n",
+ __func__, i);
+ trans_done = 1;
+ break;
+ case STATE_ERROR:
+ res = -EIO;
+ dprintk("%s(): error state\n",
+ __func__);
+ goto done;
+ default:
+ dprintk("%s(): invalid state %d\n",
+ __func__, i2c->state);
+ res = -EINVAL;
+ goto done;
+ }
+ if (!trans_done) {
+ i2c->state = STATE_WAIT;
+ reg = readw(
+ &i2c->regs->twi_ctrl0_stat);
+ writew(TWI_IRQEN | reg,
+ &i2c->regs->twi_ctrl0_stat);
+ }
+ spin_unlock_irqrestore(&i2c->lock, flags);
+ } else {
+ spin_lock_irqsave(&i2c->lock, flags);
+ dprintk("%s(): wait timeout\n", __func__);
+ res = -ETIMEDOUT;
+ goto done;
+ }
+ spin_lock_irqsave(&i2c->lock, flags);
+ }
+ }
+done: spin_unlock_irqrestore(&i2c->lock, flags);
+ dprintk("%s(): result %d\n", __func__, res);
+ return res;
+}
+
+static u32 netup_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm netup_i2c_algorithm = {
+ .master_xfer = netup_i2c_xfer,
+ .functionality = netup_i2c_func,
+};
+
+static struct i2c_adapter netup_i2c_adapter = {
+ .owner = THIS_MODULE,
+ .name = NETUP_UNIDVB_NAME,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &netup_i2c_algorithm,
+};
+
+static int netup_i2c_init(struct netup_unidvb_dev *ndev, int bus_num)
+{
+ int ret;
+ struct netup_i2c *i2c;
+
+ if (bus_num < 0 || bus_num > 1) {
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): invalid bus_num %d\n", __func__, bus_num);
+ return -EINVAL;
+ }
+ i2c = &ndev->i2c[bus_num];
+ spin_lock_init(&i2c->lock);
+ init_waitqueue_head(&i2c->wq);
+ i2c->regs = (struct netup_i2c_regs *)(ndev->bmmio0 +
+ (bus_num == 0 ? NETUP_I2C_BUS0_ADDR : NETUP_I2C_BUS1_ADDR));
+ netup_i2c_reset(i2c);
+ i2c->adap = netup_i2c_adapter;
+ i2c->adap.dev.parent = &ndev->pci_dev->dev;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret) {
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): failed to add I2C adapter\n", __func__);
+ return ret;
+ }
+ dev_info(&ndev->pci_dev->dev,
+ "%s(): registered I2C bus %d at 0x%x\n",
+ __func__,
+ bus_num, (bus_num == 0 ?
+ NETUP_I2C_BUS0_ADDR :
+ NETUP_I2C_BUS1_ADDR));
+ return 0;
+}
+
+static void netup_i2c_remove(struct netup_unidvb_dev *ndev, int bus_num)
+{
+ struct netup_i2c *i2c;
+
+ if (bus_num < 0 || bus_num > 1) {
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): invalid bus number %d\n", __func__, bus_num);
+ return;
+ }
+ i2c = &ndev->i2c[bus_num];
+ netup_i2c_reset(i2c);
+ msleep(20);
+ /* remove adapter */
+ i2c_del_adapter(&i2c->adap);
+ dev_info(&ndev->pci_dev->dev,
+ "netup_i2c_remove: unregistered I2C bus %d\n", bus_num);
+}
+
+int netup_i2c_register(struct netup_unidvb_dev *ndev)
+{
+ int ret;
+
+ ret = netup_i2c_init(ndev, 0);
+ if (ret)
+ return ret;
+ ret = netup_i2c_init(ndev, 1);
+ if (ret) {
+ netup_i2c_remove(ndev, 0);
+ return ret;
+ }
+ return 0;
+}
+
+void netup_i2c_unregister(struct netup_unidvb_dev *ndev)
+{
+ netup_i2c_remove(ndev, 0);
+ netup_i2c_remove(ndev, 1);
+}
+
diff --git a/drivers/media/pci/netup/netup_unidvb_spi.c b/drivers/media/pci/netup/netup_unidvb_spi.c
new file mode 100644
index 0000000..d22158c
--- /dev/null
+++ b/drivers/media/pci/netup/netup_unidvb_spi.c
@@ -0,0 +1,272 @@
+/*
+ * netup_unidvb_spi.c
+ *
+ * Internal SPI driver for NetUP Universal Dual DVB-CI
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "netup_unidvb.h"
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/partitions.h>
+#include <mtd/mtd-abi.h>
+
+#define NETUP_SPI_CTRL_IRQ 0x1000
+#define NETUP_SPI_CTRL_IMASK 0x2000
+#define NETUP_SPI_CTRL_START 0x8000
+#define NETUP_SPI_CTRL_LAST_CS 0x4000
+
+#define NETUP_SPI_TIMEOUT (6*HZ)
+
+static int spi_debug;
+module_param(spi_debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(i2c_debug, "Debug NetUP SPI bus (default:no)");
+
+#define dprintk(args...) \
+ do { \
+ if (spi_debug) \
+ dev_dbg(&spi->master->dev, args); \
+ } while (0)
+
+enum netup_spi_state {
+ SPI_STATE_START,
+ SPI_STATE_DONE,
+};
+
+struct netup_spi_regs {
+ u8 data[1024];
+ u16 control_stat;
+ u16 clock_divider;
+} __packed __aligned(1);
+
+struct netup_spi {
+ struct device *dev;
+ struct spi_master *master;
+ struct netup_spi_regs *regs;
+ u8 __iomem *mmio;
+ spinlock_t lock;
+ wait_queue_head_t waitq;
+ enum netup_spi_state state;
+};
+
+static char netup_spi_name[64] = "fpga";
+
+static struct mtd_partition netup_spi_flash_partitions = {
+ .name = netup_spi_name,
+ .size = 0x1000000, /* 16MB */
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+};
+
+static struct flash_platform_data spi_flash_data = {
+ .name = "netup0_m25p128",
+ .parts = &netup_spi_flash_partitions,
+ .nr_parts = 1,
+};
+
+static struct spi_board_info netup_spi_board = {
+ .modalias = "m25p128",
+ .max_speed_hz = 11000000,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .platform_data = &spi_flash_data,
+};
+
+irqreturn_t netup_spi_interrupt(struct netup_spi *spi)
+{
+ u16 reg;
+ unsigned long flags;
+
+ if (!spi) {
+ dprintk("%s(): SPI not initialized\n", __func__);
+ return IRQ_NONE;
+ }
+ spin_lock_irqsave(&spi->lock, flags);
+ reg = readw(&spi->regs->control_stat);
+ if (!(reg & NETUP_SPI_CTRL_IRQ)) {
+ spin_unlock_irqrestore(&spi->lock, flags);
+ dprintk("%s(): not mine interrupt\n", __func__);
+ return IRQ_NONE;
+ }
+ writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
+ reg = readw(&spi->regs->control_stat);
+ writew(reg & ~NETUP_SPI_CTRL_IMASK, &spi->regs->control_stat);
+ spi->state = SPI_STATE_DONE;
+ wake_up(&spi->waitq);
+ spin_unlock_irqrestore(&spi->lock, flags);
+ dprintk("%s(): SPI interrupt handled\n", __func__);
+ return IRQ_HANDLED;
+}
+
+static void netup_spi_dump(struct netup_spi *spi, u8 *buf, u32 len, int tx)
+{
+ u32 i;
+
+ if (!spi_debug)
+ return;
+ dprintk("%s(): %s data len %d\n",
+ __func__, (tx == 0 ? "RX" : "TX"), len);
+ for (i = 0; i < len; i++)
+ dprintk("%02x\n", *(buf + i));
+}
+
+static int netup_spi_transfer(
+ struct spi_master *master, struct spi_message *msg)
+{
+ struct netup_spi *spi = spi_master_get_devdata(master);
+ struct spi_transfer *t;
+ int result = 0;
+ u32 tr_size;
+
+ /* reset CS */
+ writew(NETUP_SPI_CTRL_LAST_CS, &spi->regs->control_stat);
+ writew(0, &spi->regs->control_stat);
+ list_for_each_entry(t, &msg->transfers, transfer_list) {
+ tr_size = t->len;
+ while (tr_size) {
+ u32 frag_offset = t->len - tr_size;
+ u32 frag_size = (tr_size > sizeof(spi->regs->data)) ?
+ sizeof(spi->regs->data) : tr_size;
+ int frag_last = 0;
+
+ if (list_is_last(&t->transfer_list,
+ &msg->transfers) &&
+ frag_offset + frag_size == t->len) {
+ frag_last = 1;
+ }
+ if (t->tx_buf) {
+ memcpy_toio(spi->regs->data,
+ t->tx_buf + frag_offset,
+ frag_size);
+ netup_spi_dump(spi,
+ (u8 *)t->tx_buf + frag_offset,
+ frag_size, 1);
+ } else {
+ memset_io(spi->regs->data,
+ 0, frag_size);
+ }
+ spi->state = SPI_STATE_START;
+ writew((frag_size & 0x3ff) |
+ NETUP_SPI_CTRL_IMASK |
+ NETUP_SPI_CTRL_START |
+ (frag_last ? NETUP_SPI_CTRL_LAST_CS : 0),
+ &spi->regs->control_stat);
+ dprintk("%s(): control_stat 0x%04x\n",
+ __func__, readw(&spi->regs->control_stat));
+ wait_event_timeout(spi->waitq,
+ spi->state != SPI_STATE_START,
+ NETUP_SPI_TIMEOUT);
+ if (spi->state == SPI_STATE_DONE) {
+ if (t->rx_buf) {
+ memcpy_fromio(t->rx_buf + frag_offset,
+ spi->regs->data, frag_size);
+ netup_spi_dump(spi,
+ (u8 *)t->rx_buf + frag_offset,
+ frag_size, 0);
+ }
+ } else {
+ if (spi->state == SPI_STATE_START) {
+ dprintk("%s(): transfer timeout\n",
+ __func__);
+ } else {
+ dprintk("%s(): invalid state %d\n",
+ __func__, spi->state);
+ }
+ result = -EIO;
+ goto done;
+ }
+ tr_size -= frag_size;
+ msg->actual_length += frag_size;
+ }
+ }
+done: msg->status = result;
+ spi_finalize_current_message(master);
+ return result;
+}
+
+static int netup_spi_setup(struct spi_device *spi)
+{
+ return 0;
+}
+
+int netup_spi_init(struct netup_unidvb_dev *ndev)
+{
+ struct spi_master *master;
+ struct netup_spi *nspi;
+
+ master = spi_alloc_master(
+ &ndev->pci_dev->dev, sizeof(struct netup_spi));
+ if (!master) {
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): unable to alloc SPI master\n", __func__);
+ return -EINVAL;
+ }
+ nspi = spi_master_get_devdata(master);
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+ master->bus_num = -1;
+ master->num_chipselect = 1;
+ master->transfer_one_message = netup_spi_transfer;
+ master->setup = netup_spi_setup;
+ spin_lock_init(&nspi->lock);
+ init_waitqueue_head(&nspi->waitq);
+ nspi->master = master;
+ nspi->regs = (struct netup_spi_regs *)(ndev->bmmio0 + 0x4000);
+ writew(2, &nspi->regs->clock_divider);
+ writew(NETUP_UNIDVB_IRQ_SPI, ndev->bmmio0 + REG_IMASK_SET);
+ ndev->spi = nspi;
+ if (spi_register_master(master)) {
+ ndev->spi = NULL;
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): unable to register SPI bus\n", __func__);
+ return -EINVAL;
+ }
+ snprintf(netup_spi_name,
+ sizeof(netup_spi_name),
+ "fpga_%02x:%02x.%01x",
+ ndev->pci_bus,
+ ndev->pci_slot,
+ ndev->pci_func);
+ if (!spi_new_device(master, &netup_spi_board)) {
+ ndev->spi = NULL;
+ dev_err(&ndev->pci_dev->dev,
+ "%s(): unable to create SPI device\n", __func__);
+ return -EINVAL;
+ }
+ dev_dbg(&ndev->pci_dev->dev, "%s(): SPI init OK\n", __func__);
+ return 0;
+}
+
+void netup_spi_release(struct netup_unidvb_dev *ndev)
+{
+ u16 reg;
+ unsigned long flags;
+ struct netup_spi *spi = ndev->spi;
+
+ if (!spi) {
+ dprintk("%s(): SPI not initialized\n", __func__);
+ return;
+ }
+ spin_lock_irqsave(&spi->lock, flags);
+ reg = readw(&spi->regs->control_stat);
+ writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
+ reg = readw(&spi->regs->control_stat);
+ writew(reg & ~NETUP_SPI_CTRL_IMASK, &spi->regs->control_stat);
+ spin_unlock_irqrestore(&spi->lock, flags);
+ spi_unregister_master(spi->master);
+ ndev->spi = NULL;
+}
+
+
--
1.7.10.4
next reply other threads:[~2015-02-03 8:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-02 9:22 Kozlov Sergey [this message]
2015-03-05 11:59 ` [PATCH 5/5] [media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150203082419.CA9AC1BC32CD@debian \
--to=serjk@netup.ru \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).