From: "Nibble Max" <nibble.max@gmail.com>
To: "Dirk Nehring" <dnehring@gmx.net>
Cc: "linux-media" <linux-media@vger.kernel.org>
Subject: [PATCH 1/1] SMI PCIe IR driver for DVBSky cards
Date: Mon, 29 Jun 2015 22:09:42 +0800 [thread overview]
Message-ID: <201506292209394689855@gmail.com> (raw)
ported from the manufacturer's source tree, available from
http://dvbsky.net/download/linux/media_build-bst-150211.tar.gz
This is the second patch after a public review.
Acked-by: Nibble Max <nibble.max@gmail.com>
Reviewd-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Dirk Nehring <dnehring@gmx.net>
---
drivers/media/pci/smipcie/Kconfig | 1 +
drivers/media/pci/smipcie/Makefile | 3 +
drivers/media/pci/smipcie/smipcie-ir.c | 232 +++++++++++++++++++++
.../pci/smipcie/{smipcie.c => smipcie-main.c} | 14 +-
drivers/media/pci/smipcie/smipcie.h | 19 ++
5 files changed, 268 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/pci/smipcie/smipcie-ir.c
rename drivers/media/pci/smipcie/{smipcie.c => smipcie-main.c} (99%)
diff --git a/drivers/media/pci/smipcie/Kconfig b/drivers/media/pci/smipcie/Kconfig
index 21a1583..c11c772 100644
--- a/drivers/media/pci/smipcie/Kconfig
+++ b/drivers/media/pci/smipcie/Kconfig
@@ -7,6 +7,7 @@ config DVB_SMIPCIE
select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ depends on RC_CORE
help
Support for cards with SMI PCIe bridge:
- DVBSky S950 V3
diff --git a/drivers/media/pci/smipcie/Makefile b/drivers/media/pci/smipcie/Makefile
index be55481..013bc3f 100644
--- a/drivers/media/pci/smipcie/Makefile
+++ b/drivers/media/pci/smipcie/Makefile
@@ -1,3 +1,6 @@
+
+smipcie-objs := smipcie-main.o smipcie-ir.o
+
obj-$(CONFIG_DVB_SMIPCIE) += smipcie.o
ccflags-y += -Idrivers/media/tuners
diff --git a/drivers/media/pci/smipcie/smipcie-ir.c b/drivers/media/pci/smipcie/smipcie-ir.c
new file mode 100644
index 0000000..b8ea739
--- /dev/null
+++ b/drivers/media/pci/smipcie/smipcie-ir.c
@@ -0,0 +1,232 @@
+/*
+ * SMI PCIe driver for DVBSky cards.
+ *
+ * Copyright (C) 2014 Max nibble <nibble.max@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "smipcie.h"
+
+static void smi_ir_enableInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_ENA_SET, IR_X_INT);
+}
+
+static void smi_ir_disableInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_ENA_CLR, IR_X_INT);
+}
+
+static void smi_ir_clearInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_STATUS_CLR, IR_X_INT);
+}
+
+static void smi_ir_stop(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_ir_disableInterrupt(ir);
+ smi_clear(IR_Init_Reg, 0x80);
+}
+
+#define BITS_PER_COMMAND 14
+#define GROUPS_PER_BIT 2
+#define IR_RC5_MIN_BIT 36
+#define IR_RC5_MAX_BIT 52
+static u32 smi_decode_rc5(u8 *pData, u8 size)
+{
+ u8 index, current_bit, bit_count;
+ u8 group_array[BITS_PER_COMMAND * GROUPS_PER_BIT + 4];
+ u8 group_index = 0;
+ u32 command = 0xFFFFFFFF;
+
+ group_array[group_index++] = 1;
+
+ for (index = 0; index < size; index++) {
+
+ current_bit = (pData[index] & 0x80) ? 1 : 0;
+ bit_count = pData[index] & 0x7f;
+
+ if ((current_bit == 1) && (bit_count >= 2*IR_RC5_MAX_BIT + 1)) {
+ goto process_code;
+ } else if ((bit_count >= IR_RC5_MIN_BIT) &&
+ (bit_count <= IR_RC5_MAX_BIT)) {
+ group_array[group_index++] = current_bit;
+ } else if ((bit_count > IR_RC5_MAX_BIT) &&
+ (bit_count <= 2*IR_RC5_MAX_BIT)) {
+ group_array[group_index++] = current_bit;
+ group_array[group_index++] = current_bit;
+ } else {
+ goto invalid_timing;
+ }
+ if (group_index >= BITS_PER_COMMAND*GROUPS_PER_BIT)
+ goto process_code;
+
+ if ((group_index == BITS_PER_COMMAND*GROUPS_PER_BIT - 1)
+ && (group_array[group_index-1] == 0)) {
+ group_array[group_index++] = 1;
+ goto process_code;
+ }
+ }
+
+process_code:
+ if (group_index == (BITS_PER_COMMAND*GROUPS_PER_BIT-1))
+ group_array[group_index++] = 1;
+
+ if (group_index == BITS_PER_COMMAND*GROUPS_PER_BIT) {
+ command = 0;
+ for (index = 0; index < (BITS_PER_COMMAND*GROUPS_PER_BIT);
+ index = index + 2) {
+ if ((group_array[index] == 1) &&
+ (group_array[index+1] == 0)) {
+ command |= (1 << (BITS_PER_COMMAND -
+ (index/2) - 1));
+ } else if ((group_array[index] == 0) &&
+ (group_array[index+1] == 1)) {
+ /* */
+ } else {
+ command = 0xFFFFFFFF;
+ goto invalid_timing;
+ }
+ }
+ }
+
+invalid_timing:
+ return command;
+}
+
+static void smi_ir_decode(struct work_struct *work)
+{
+ struct smi_rc *ir = container_of(work, struct smi_rc, work);
+ struct smi_dev *dev = ir->dev;
+ struct rc_dev *rc_dev = ir->rc_dev;
+ u32 dwIRControl, dwIRData, dwIRCode, scancode;
+ u8 index, ucIRCount, readLoop, rc5_command, rc5_system, toggle;
+
+ dwIRControl = smi_read(IR_Init_Reg);
+ if (dwIRControl & rbIRVld) {
+ ucIRCount = (u8) smi_read(IR_Data_Cnt);
+
+ if (ucIRCount < 4)
+ goto end_ir_decode;
+
+ readLoop = ucIRCount/4;
+ if (ucIRCount % 4)
+ readLoop += 1;
+ for (index = 0; index < readLoop; index++) {
+ dwIRData = smi_read(IR_DATA_BUFFER_BASE + (index*4));
+
+ ir->irData[index*4 + 0] = (u8)(dwIRData);
+ ir->irData[index*4 + 1] = (u8)(dwIRData >> 8);
+ ir->irData[index*4 + 2] = (u8)(dwIRData >> 16);
+ ir->irData[index*4 + 3] = (u8)(dwIRData >> 24);
+ }
+ dwIRCode = smi_decode_rc5(ir->irData, ucIRCount);
+
+ if (dwIRCode != 0xFFFFFFFF) {
+ rc5_command = dwIRCode & 0x3F;
+ rc5_system = (dwIRCode & 0x7C0) >> 6;
+ toggle = (dwIRCode & 0x800) ? 1 : 0;
+ scancode = rc5_system << 8 | rc5_command;
+ rc_keydown(rc_dev, RC_TYPE_RC5, scancode, toggle);
+ }
+ }
+end_ir_decode:
+ smi_set(IR_Init_Reg, 0x04);
+ smi_ir_enableInterrupt(ir);
+}
+
+/* ir functions call by main driver.*/
+int smi_ir_irq(struct smi_rc *ir, u32 int_status)
+{
+ int handled = 0;
+
+ if (int_status & IR_X_INT) {
+ smi_ir_disableInterrupt(ir);
+ smi_ir_clearInterrupt(ir);
+ schedule_work(&ir->work);
+ handled = 1;
+ }
+ return handled;
+}
+
+void smi_ir_start(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(IR_Idle_Cnt_Low, 0x00140070);
+ msleep(20);
+ smi_set(IR_Init_Reg, 0x90);
+
+ smi_ir_enableInterrupt(ir);
+}
+
+int smi_ir_init(struct smi_dev *dev)
+{
+ int ret;
+ struct rc_dev *rc_dev;
+ struct smi_rc *ir = &dev->ir;
+
+ rc_dev = rc_allocate_device();
+ if (!rc_dev)
+ return -ENOMEM;
+
+ /* init input device */
+ snprintf(ir->input_name, sizeof(ir->input_name), "IR (%s)",
+ dev->info->name);
+ snprintf(ir->input_phys, sizeof(ir->input_phys), "pci-%s/ir0",
+ pci_name(dev->pci_dev));
+
+ rc_dev->driver_name = "SMI_PCIe";
+ rc_dev->input_phys = ir->input_phys;
+ rc_dev->input_name = ir->input_name;
+ rc_dev->input_id.bustype = BUS_PCI;
+ rc_dev->input_id.version = 1;
+ rc_dev->input_id.vendor = dev->pci_dev->subsystem_vendor;
+ rc_dev->input_id.product = dev->pci_dev->subsystem_device;
+ rc_dev->dev.parent = &dev->pci_dev->dev;
+
+ rc_dev->driver_type = RC_DRIVER_SCANCODE;
+ rc_dev->map_name = RC_MAP_DVBSKY;
+
+ ir->rc_dev = rc_dev;
+ ir->dev = dev;
+
+ INIT_WORK(&ir->work, smi_ir_decode);
+ smi_ir_disableInterrupt(ir);
+
+ ret = rc_register_device(rc_dev);
+ if (ret)
+ goto ir_err;
+
+ return 0;
+ir_err:
+ rc_free_device(rc_dev);
+ return ret;
+}
+
+void smi_ir_exit(struct smi_dev *dev)
+{
+ struct smi_rc *ir = &dev->ir;
+ struct rc_dev *rc_dev = ir->rc_dev;
+
+ smi_ir_stop(ir);
+ rc_unregister_device(rc_dev);
+ ir->rc_dev = NULL;
+}
diff --git a/drivers/media/pci/smipcie/smipcie.c b/drivers/media/pci/smipcie/smipcie-main.c
similarity index 99%
rename from drivers/media/pci/smipcie/smipcie.c
rename to drivers/media/pci/smipcie/smipcie-main.c
index 143fd78..b039a22 100644
--- a/drivers/media/pci/smipcie/smipcie.c
+++ b/drivers/media/pci/smipcie/smipcie-main.c
@@ -468,6 +468,7 @@ static irqreturn_t smi_irq_handler(int irq, void *dev_id)
struct smi_dev *dev = dev_id;
struct smi_port *port0 = &dev->ts_port[0];
struct smi_port *port1 = &dev->ts_port[1];
+ struct smi_rc *ir = &dev->ir;
int handled = 0;
u32 intr_status = smi_read(MSI_INT_STATUS);
@@ -480,6 +481,9 @@ static irqreturn_t smi_irq_handler(int irq, void *dev_id)
if (dev->info->ts_1)
handled += smi_port_irq(port1, intr_status);
+ /* ir interrupt.*/
+ handled += smi_ir_irq(ir, intr_status);
+
return IRQ_RETVAL(handled);
}
@@ -993,6 +997,10 @@ static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_del_port0_attach;
}
+ ret = smi_ir_init(dev);
+ if (ret < 0)
+ goto err_del_port1_attach;
+
#ifdef CONFIG_PCI_MSI /* to do msi interrupt.???*/
if (pci_msi_enabled())
ret = pci_enable_msi(dev->pci_dev);
@@ -1003,10 +1011,13 @@ static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ret = request_irq(dev->pci_dev->irq, smi_irq_handler,
IRQF_SHARED, "SMI_PCIE", dev);
if (ret < 0)
- goto err_del_port1_attach;
+ goto err_del_ir;
+ smi_ir_start(&dev->ir);
return 0;
+err_del_ir:
+ smi_ir_exit(dev);
err_del_port1_attach:
if (dev->info->ts_1)
smi_port_detach(&dev->ts_port[1]);
@@ -1039,6 +1050,7 @@ static void smi_remove(struct pci_dev *pdev)
if (dev->info->ts_0)
smi_port_detach(&dev->ts_port[0]);
+ smi_ir_exit(dev);
smi_i2c_exit(dev);
iounmap(dev->lmmio);
pci_set_drvdata(pdev, NULL);
diff --git a/drivers/media/pci/smipcie/smipcie.h b/drivers/media/pci/smipcie/smipcie.h
index 10cdf20..68cdda2 100644
--- a/drivers/media/pci/smipcie/smipcie.h
+++ b/drivers/media/pci/smipcie/smipcie.h
@@ -234,6 +234,17 @@ struct smi_cfg_info {
int fe_1;
};
+struct smi_rc {
+ struct smi_dev *dev;
+ struct rc_dev *rc_dev;
+ char input_phys[64];
+ char input_name[64];
+ struct work_struct work;
+ u8 irData[256];
+
+ int users;
+};
+
struct smi_port {
struct smi_dev *dev;
int idx;
@@ -284,6 +295,9 @@ struct smi_dev {
/* i2c */
struct i2c_adapter i2c_bus[2];
struct i2c_algo_bit_data i2c_bit[2];
+
+ /* ir */
+ struct smi_rc ir;
};
#define smi_read(reg) readl(dev->lmmio + ((reg)>>2))
@@ -296,4 +310,9 @@ struct smi_dev {
#define smi_set(reg, bit) smi_andor((reg), (bit), (bit))
#define smi_clear(reg, bit) smi_andor((reg), (bit), 0)
+int smi_ir_irq(struct smi_rc *ir, u32 int_status);
+void smi_ir_start(struct smi_rc *ir);
+void smi_ir_exit(struct smi_dev *dev);
+int smi_ir_init(struct smi_dev *dev);
+
#endif /* #ifndef _SMI_PCIE_H_ */
--
1.8.3.1
next reply other threads:[~2015-06-29 14:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 14:09 Nibble Max [this message]
2015-06-29 14:40 ` [PATCH 1/1] SMI PCIe IR driver for DVBSky cards Ole Ernst
2015-06-30 1:20 ` Nibble Max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201506292209394689855@gmail.com \
--to=nibble.max@gmail.com \
--cc=dnehring@gmx.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox