From: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
To: linux-media@vger.kernel.org
Subject: [PATCH] media: cx88: Add support for NotOnlyTV LV3H card
Date: Wed, 11 Sep 2019 19:57:06 +0200 [thread overview]
Message-ID: <2015555.oeIbV09UUN@tool> (raw)
Add support for the PCI hybrid card NotOnlyTV LV3H. This card consists of:
- A/V Controller: Conexant CX-23883
- Tuner: Xceive XC3028L
- DVB-T Decoder: Zarlink ZL10353
This patch adds support for DVB-T, Analog TV, FM radio, composite and S-video inputs.
The IR input isn't supported.
Since the PCI subsystem ID (14f1:8852) is the same as the Geniatech X8000-MT, but they are
different boards, the card is only supported via insmod option:
options cx88xx card=91
For the record this is the eeprom dump, useful if someone wanted to implement the card
auto detection:
07 ff ff ff f1 14 52 88 04 04 32 55 f8 00 a2 02
a1 00 40 63 06 11 44 30 03 df 40 80 00 20 00 73
3c 10 00 00 00 00 ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0 00
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
---
drivers/media/pci/cx88/cx88-cards.c | 43 +++++++++++++++++++++++++++++
drivers/media/pci/cx88/cx88-dvb.c | 1 +
drivers/media/pci/cx88/cx88.h | 1 +
3 files changed, 45 insertions(+)
diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
index 3cd87626c..5a76bb760 100644
--- a/drivers/media/pci/cx88/cx88-cards.c
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -1781,6 +1781,41 @@ static const struct cx88_board cx88_boards[] = {
},
.mpeg = CX88_MPEG_DVB,
},
+ [CX88_BOARD_NOTONLYTV_LV3H] = {
+ .name = "NotOnlyTV LV3H",
+ .tuner_type = TUNER_XC2028,
+ .radio_type = UNSET,
+ .tuner_addr = 0x61,
+ .radio_addr = ADDR_UNSET,
+ /* if gpio1:bit9 is enabled, DVB-T won't work */
+
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0000,
+ .gpio1 = 0xa141,
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0000,
+ .gpio1 = 0xa161,
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x0000,
+ .gpio1 = 0xa161,
+ .gpio2 = 0x0000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x0000,
+ .gpio1 = 0xa141,
+ .gpio2 = 0x0000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = {
.name = "DViCO FusionHDTV DVB-T PRO",
.tuner_type = TUNER_XC2028,
@@ -2654,6 +2689,7 @@ static const struct cx88_subid cx88_subids[] = {
.subdevice = 0x6f18,
.card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
}, {
+ /* Also NotOnlyTV LV3H (version 1.11 is silkscreened on the board) */
.subvendor = 0x14f1,
.subdevice = 0x8852,
.card = CX88_BOARD_GENIATECH_X8000_MT,
@@ -3121,6 +3157,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
return cx88_dvico_xc2028_callback(core, command, arg);
+ case CX88_BOARD_NOTONLYTV_LV3H:
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_WINFAST_DTV1800H:
return cx88_xc3028_winfast1800h_callback(core, command, arg);
@@ -3322,6 +3359,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
udelay(1000);
break;
+ case CX88_BOARD_NOTONLYTV_LV3H:
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_WINFAST_DTV1800H:
cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0);
@@ -3378,6 +3416,11 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
*/
ctl->disable_power_mgmt = 1;
break;
+ case CX88_BOARD_NOTONLYTV_LV3H:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ ctl->read_not_reliable = 1;
+ break;
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
index 0292d0947..202ff9e8c 100644
--- a/drivers/media/pci/cx88/cx88-dvb.c
+++ b/drivers/media/pci/cx88/cx88-dvb.c
@@ -1378,6 +1378,7 @@ static int dvb_register(struct cx8802_dev *dev)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX88_BOARD_NOTONLYTV_LV3H:
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
case CX88_BOARD_WINFAST_DTV1800H:
fe0->dvb.frontend = dvb_attach(zl10353_attach,
diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h
index 744a22328..ce4acf6de 100644
--- a/drivers/media/pci/cx88/cx88.h
+++ b/drivers/media/pci/cx88/cx88.h
@@ -228,6 +228,7 @@ extern const struct sram_channel cx88_sram_channels[];
#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88
#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36 89
#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43 90
+#define CX88_BOARD_NOTONLYTV_LV3H 91
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
--
2.23.0
reply other threads:[~2019-09-11 17:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2015555.oeIbV09UUN@tool \
--to=dgcbueu@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox