From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@infradead.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Seung-Woo Kim <sw0312.kim@samsung.com>,
Junghak Sung <jh1009.sung@samsung.com>,
Geunyoung Kim <nenggun.kim@samsung.com>,
Jacek Anaszewski <j.anaszewski@samsung.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Subject: Re: [PATCH 1/2] [media] v4l2-mc: add a generic function to create the media graph
Date: Fri, 5 Feb 2016 13:36:52 -0200 [thread overview]
Message-ID: <20160205133652.426e714a@recife.lan> (raw)
In-Reply-To: <56B4B0D9.4040307@osg.samsung.com>
Em Fri, 05 Feb 2016 07:25:29 -0700
Shuah Khan <shuahkh@osg.samsung.com> escreveu:
> On 02/05/2016 02:51 AM, Mauro Carvalho Chehab wrote:
> > The em28xx_v4l2_create_media_graph() is almost generic enough to
> > be at the core, as an ancillary function. Make it even more generic,
> > by getting rid of em28xx-specific code, relying only at the
> > media_device, in order to discover all entities found on PC-customer's
> > hardware and add it at the V4L2 core.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> > ---
> > drivers/media/v4l2-core/Makefile | 1 +
> > drivers/media/v4l2-core/v4l2-mc.c | 181 ++++++++++++++++++++++++++++++++++++++
> > include/media/v4l2-mc.h | 24 +++++
> > 3 files changed, 206 insertions(+)
> > create mode 100644 drivers/media/v4l2-core/v4l2-mc.c
>
>
> Hi Mauro,
>
> The following patch I sent a couple of days ago creates
> this file rivers/media/v4l2-core/v4l2-mc.c
>
> You had some minor comments on that patch and I am working
> on addressing them.
>
> [PATCH v2 07/22] media: v4l-core add enable/disable source common interfaces
> https://lkml.org/lkml/2016/2/3/1500
>
> Looks like you added it in your patch. This would lead a conflict
> between our patches. How do you propose to resolve this?
Don't worry with that. As it is just line additions, such conflict is
easily handle. No need to rebase.
>
> thanks,
> -- Shuah
>
>
> >
> > diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
> > index 1dc8bba2b198..795a5352761d 100644
> > --- a/drivers/media/v4l2-core/Makefile
> > +++ b/drivers/media/v4l2-core/Makefile
> > @@ -16,6 +16,7 @@ endif
> > ifeq ($(CONFIG_TRACEPOINTS),y)
> > videodev-objs += vb2-trace.o v4l2-trace.o
> > endif
> > +videodev-$(CONFIG_MEDIA_CONTROLLER) += v4l2-mc.o
> >
> > obj-$(CONFIG_VIDEO_V4L2) += videodev.o
> > obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o
> > diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
> > new file mode 100644
> > index 000000000000..7276dbbbe830
> > --- /dev/null
> > +++ b/drivers/media/v4l2-core/v4l2-mc.c
> > @@ -0,0 +1,181 @@
> > +/*
> > + * Media Controller ancillary functions
> > + *
> > + * (c) 2016 Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +int v4l2_mc_create_media_graph(struct media_device *mdev)
> > +
> > +{
> > + struct media_entity *entity;
> > + struct media_entity *if_vid = NULL, *if_aud = NULL, *sensor = NULL;
> > + struct media_entity *tuner = NULL, *decoder = NULL;
> > + struct media_entity *io_v4l = NULL, *io_vbi = NULL, *io_swradio = NULL;
> > + bool is_webcam = false;
> > + int ret;
> > +
> > + if (!mdev)
> > + return 0;
> > +
> > + media_device_for_each_entity(entity, mdev) {
> > + switch (entity->function) {
> > + case MEDIA_ENT_F_IF_VID_DECODER:
> > + if_vid = entity;
> > + break;
> > + case MEDIA_ENT_F_IF_AUD_DECODER:
> > + if_aud = entity;
> > + break;
> > + case MEDIA_ENT_F_TUNER:
> > + tuner = entity;
> > + break;
> > + case MEDIA_ENT_F_ATV_DECODER:
> > + decoder = entity;
> > + break;
> > + case MEDIA_ENT_F_IO_V4L:
> > + io_v4l = entity;
> > + break;
> > + case MEDIA_ENT_F_IO_VBI:
> > + io_vbi = entity;
> > + break;
> > + case MEDIA_ENT_F_IO_SWRADIO:
> > + io_swradio = entity;
> > + break;
> > + case MEDIA_ENT_F_CAM_SENSOR:
> > + sensor = entity;
> > + is_webcam = true;
> > + break;
> > + }
> > + }
> > +
> > + /* It should have at least one I/O entity */
> > + if (!io_v4l && !io_vbi && !io_swradio)
> > + return -EINVAL;
> > +
> > + /*
> > + * Here, webcams are modeled on a very simple way: the sensor is
> > + * connected directly to the I/O entity. All dirty details, like
> > + * scaler and crop HW are hidden. While such mapping is not enough
> > + * for mc-centric hardware, it is enough for v4l2 interface centric
> > + * PC-consumer's hardware.
> > + */
> > + if (is_webcam) {
> > + if (!io_v4l)
> > + return -EINVAL;
> > +
> > + media_device_for_each_entity(entity, mdev) {
> > + if (entity->function != MEDIA_ENT_F_CAM_SENSOR)
> > + continue;
> > + ret = media_create_pad_link(entity, 0,
> > + io_v4l, 0,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + }
> > + if (!decoder)
> > + return 0;
> > + }
> > +
> > + /* The device isn't a webcam. So, it should have a decoder */
> > + if (!decoder)
> > + return -EINVAL;
> > +
> > + /* Link the tuner and IF video output pads */
> > + if (tuner) {
> > + if (if_vid) {
> > + ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
> > + if_vid,
> > + IF_VID_DEC_PAD_IF_INPUT,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + ret = media_create_pad_link(if_vid, IF_VID_DEC_PAD_OUT,
> > + decoder, DEMOD_PAD_IF_INPUT,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + } else {
> > + ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
> > + decoder, DEMOD_PAD_IF_INPUT,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (if_aud) {
> > + ret = media_create_pad_link(tuner, TUNER_PAD_AUD_OUT,
> > + if_aud,
> > + IF_AUD_DEC_PAD_IF_INPUT,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + } else {
> > + if_aud = tuner;
> > + }
> > +
> > + }
> > +
> > + /* Create demod to V4L, VBI and SDR radio links */
> > + if (io_v4l) {
> > + ret = media_create_pad_link(decoder, DEMOD_PAD_VID_OUT,
> > + io_v4l, 0,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (io_swradio) {
> > + ret = media_create_pad_link(decoder, DEMOD_PAD_VID_OUT,
> > + io_swradio, 0,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (io_vbi) {
> > + ret = media_create_pad_link(decoder, DEMOD_PAD_VBI_OUT,
> > + io_vbi, 0,
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /* Create links for the media connectors */
> > + media_device_for_each_entity(entity, mdev) {
> > + switch (entity->function) {
> > + case MEDIA_ENT_F_CONN_RF:
> > + if (!tuner)
> > + continue;
> > +
> > + ret = media_create_pad_link(entity, 0, tuner,
> > + TUNER_PAD_RF_INPUT,
> > + MEDIA_LNK_FL_ENABLED);
> > + break;
> > + case MEDIA_ENT_F_CONN_SVIDEO:
> > + case MEDIA_ENT_F_CONN_COMPOSITE:
> > + case MEDIA_ENT_F_CONN_TEST:
> > + ret = media_create_pad_link(entity, 0, decoder,
> > + DEMOD_PAD_IF_INPUT, 0);
> > + break;
> > + default:
> > + continue;
> > + }
> > + if (ret)
> > + return ret;
> > + }
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(v4l2_mc_create_media_graph);
> > diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h
> > index df115195690e..3097493e6cf1 100644
> > --- a/include/media/v4l2-mc.h
> > +++ b/include/media/v4l2-mc.h
> > @@ -14,6 +14,8 @@
> > * GNU General Public License for more details.
> > */
> >
> > +#include <media/media-device.h>
> > +
> > /**
> > * enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
> > *
> > @@ -89,3 +91,25 @@ enum demod_pad_index {
> > DEMOD_PAD_VBI_OUT,
> > DEMOD_NUM_PADS
> > };
> > +
> > +/**
> > + * v4l2_mc_create_media_graph() - create Media Controller links at the graph.
> > + *
> > + * @mdev: pointer to the &media_device struct.
> > + *
> > + * Add links between the entities commonly found on PC customer's hardware at
> > + * the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners,
> > + * analog TV decoder and I/O entities (video, VBI and Software Defined Radio).
> > + * NOTE: webcams are modeled on a very simple way: the sensor is
> > + * connected directly to the I/O entity. All dirty details, like
> > + * scaler and crop HW are hidden. While such mapping is enough for v4l2
> > + * interface centric PC-consumer's hardware, V4L2 subdev centric camera
> > + * hardware should not use this routine, as it will not build the right graph.
> > + */
> > +#ifdef CONFIG_MEDIA_CONTROLLER
> > +int v4l2_mc_create_media_graph(struct media_device *mdev);
> > +#else
> > +static inline int v4l2_mc_create_media_graph(struct media_device *mdev) {
> > + return 0;
> > +}
> > +#endif
> >
>
>
prev parent reply other threads:[~2016-02-05 15:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 9:51 [PATCH 1/2] [media] v4l2-mc: add a generic function to create the media graph Mauro Carvalho Chehab
2016-02-05 9:51 ` [PATCH 2/2] [media] em2xx: use v4l2_mc_create_media_graph() Mauro Carvalho Chehab
2016-02-05 14:25 ` [PATCH 1/2] [media] v4l2-mc: add a generic function to create the media graph Shuah Khan
2016-02-05 15:36 ` Mauro Carvalho Chehab [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160205133652.426e714a@recife.lan \
--to=mchehab@osg.samsung.com \
--cc=hans.verkuil@cisco.com \
--cc=j.anaszewski@samsung.com \
--cc=jh1009.sung@samsung.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=nenggun.kim@samsung.com \
--cc=p.zabel@pengutronix.de \
--cc=shuahkh@osg.samsung.com \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox