From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: [git:media_tree/master] [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs
Date: Thu, 3 Mar 2016 15:52:00 -0300 [thread overview]
Message-ID: <20160303155200.43d4c5e7@recife.lan> (raw)
In-Reply-To: <56D87FE9.4000408@gmail.com>
Em Thu, 03 Mar 2016 19:18:17 +0100
Heiner Kallweit <hkallweit1@gmail.com> escreveu:
> Am 03.03.2016 um 12:28 schrieb Mauro Carvalho Chehab:
> > This is an automatic generated email to let you know that the following patch were queued at the
> > http://git.linuxtv.org/cgit.cgi/media_tree.git tree:
> >
> > Subject: [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs
> > Author: Heiner Kallweit <hkallweit1@gmail.com>
> > Date: Mon Feb 8 17:25:59 2016 -0200
> >
> > This patch adds a binary attribute /sys/class/rc/rc?/wakeup_data which
> > allows to read / write the wakeup sequence.
> >
> When working on another module I was reminded not to forget updating Documentation/ABI.
> I think the same applies here. This patch introduces a new sysfs attribute that should
> be documented. I'll submit a patch for adding Documentation/ABI/testing/sysfs-class-rc-nuvoton
Good point.
Another thing: wouldn't be better to use a text format? This would make
esier to import from LIRC's irrecord format:
begin raw_codes
name power
850 900 1750 1800 850 900
850 900 1750 900 850 1800
850 900 850 900 850 900
1750 1800 800
end raw_codes
Regards,
Mauro
>
> Rgds, Heiner
>
> > In combination with the core extension for exposing the most recent raw
> > packet this allows to easily define and set a wakeup sequence.
> >
> > At least on my Zotac CI321 the BIOS resets the wakeup sequence at each boot
> > to a factory default. Therefore I use a udev rule
> > SUBSYSTEM=="rc", DRIVERS=="nuvoton-cir", ACTION=="add", RUN+="<script>"
> > with the script basically doing
> > cat <stored wakeup sequence> >/sys${DEVPATH}/wakeup_data
> >
> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> > Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> >
> > drivers/media/rc/nuvoton-cir.c | 85 ++++++++++++++++++++++++++++++++++++++++++
> > drivers/media/rc/nuvoton-cir.h | 3 ++
> > 2 files changed, 88 insertions(+)
> >
> > ---
> >
> > http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=449c1fcd86f5077d5076a955e65c07a7c4cbbf9d
> > diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
> > index c96da3aaf00b..c2ee5bdc6c7d 100644
> > --- a/drivers/media/rc/nuvoton-cir.c
> > +++ b/drivers/media/rc/nuvoton-cir.c
> > @@ -39,6 +39,8 @@
> >
> > #include "nuvoton-cir.h"
> >
> > +static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt);
> > +
> > static const struct nvt_chip nvt_chips[] = {
> > { "w83667hg", NVT_W83667HG },
> > { "NCT6775F", NVT_6775F },
> > @@ -177,6 +179,83 @@ static void nvt_set_ioaddr(struct nvt_dev *nvt, unsigned long *ioaddr)
> > }
> > }
> >
> > +static ssize_t wakeup_data_read(struct file *fp, struct kobject *kobj,
> > + struct bin_attribute *bin_attr,
> > + char *buf, loff_t off, size_t count)
> > +{
> > + struct device *dev = kobj_to_dev(kobj);
> > + struct rc_dev *rc_dev = to_rc_dev(dev);
> > + struct nvt_dev *nvt = rc_dev->priv;
> > + int fifo_len, len;
> > + unsigned long flags;
> > + int i;
> > +
> > + spin_lock_irqsave(&nvt->nvt_lock, flags);
> > +
> > + fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
> > + len = min(fifo_len, WAKEUP_MAX_SIZE);
> > +
> > + if (off >= len) {
> > + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> > + return 0;
> > + }
> > +
> > + if (len > count)
> > + len = count;
> > +
> > + /* go to first element to be read */
> > + while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX) != off)
> > + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
> > +
> > + for (i = 0; i < len; i++)
> > + buf[i] = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
> > +
> > + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> > +
> > + return len;
> > +}
> > +
> > +static ssize_t wakeup_data_write(struct file *fp, struct kobject *kobj,
> > + struct bin_attribute *bin_attr,
> > + char *buf, loff_t off, size_t count)
> > +{
> > + struct device *dev = kobj_to_dev(kobj);
> > + struct rc_dev *rc_dev = to_rc_dev(dev);
> > + struct nvt_dev *nvt = rc_dev->priv;
> > + unsigned long flags;
> > + u8 tolerance, config;
> > + int i;
> > +
> > + if (off > 0)
> > + return -EINVAL;
> > +
> > + /* hardcode the tolerance to 10% */
> > + tolerance = DIV_ROUND_UP(count, 10);
> > +
> > + spin_lock_irqsave(&nvt->nvt_lock, flags);
> > +
> > + nvt_clear_cir_wake_fifo(nvt);
> > + nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP);
> > + nvt_cir_wake_reg_write(nvt, tolerance, CIR_WAKE_FIFO_CMP_TOL);
> > +
> > + config = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON);
> > +
> > + /* enable writes to wake fifo */
> > + nvt_cir_wake_reg_write(nvt, config | CIR_WAKE_IRCON_MODE1,
> > + CIR_WAKE_IRCON);
> > +
> > + for (i = 0; i < count; i++)
> > + nvt_cir_wake_reg_write(nvt, buf[i], CIR_WAKE_WR_FIFO_DATA);
> > +
> > + nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON);
> > +
> > + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> > +
> > + return count;
> > +}
> > +
> > +static BIN_ATTR_RW(wakeup_data, WAKEUP_MAX_SIZE);
> > +
> > /* dump current cir register contents */
> > static void cir_dump_regs(struct nvt_dev *nvt)
> > {
> > @@ -1133,6 +1212,10 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
> > NVT_DRIVER_NAME "-wake", (void *)nvt))
> > goto exit_unregister_device;
> >
> > + ret = device_create_bin_file(&rdev->dev, &bin_attr_wakeup_data);
> > + if (ret)
> > + goto exit_unregister_device;
> > +
> > device_init_wakeup(&pdev->dev, true);
> >
> > dev_notice(&pdev->dev, "driver has been successfully loaded\n");
> > @@ -1156,6 +1239,8 @@ static void nvt_remove(struct pnp_dev *pdev)
> > {
> > struct nvt_dev *nvt = pnp_get_drvdata(pdev);
> >
> > + device_remove_bin_file(&nvt->rdev->dev, &bin_attr_wakeup_data);
> > +
> > nvt_disable_cir(nvt);
> >
> > /* enable CIR Wake (for IR power-on) */
> > diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
> > index 4a5650dffa29..c9c98ebb19ee 100644
> > --- a/drivers/media/rc/nuvoton-cir.h
> > +++ b/drivers/media/rc/nuvoton-cir.h
> > @@ -417,3 +417,6 @@ struct nvt_dev {
> > /* as VISTA MCE definition, valid carrier value */
> > #define MAX_CARRIER 60000
> > #define MIN_CARRIER 30000
> > +
> > +/* max wakeup sequence length */
> > +#define WAKEUP_MAX_SIZE 65
> >
>
--
Thanks,
Mauro
next prev parent reply other threads:[~2016-03-03 18:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1abRXi-00035h-0E@www.linuxtv.org>
2016-03-03 18:18 ` [git:media_tree/master] [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs Heiner Kallweit
2016-03-03 18:52 ` Mauro Carvalho Chehab [this message]
2016-03-03 19:22 ` Heiner Kallweit
2016-03-03 20:56 ` Mauro Carvalho Chehab
2016-03-03 21:39 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160303155200.43d4c5e7@recife.lan \
--to=mchehab@osg.samsung.com \
--cc=hkallweit1@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).