Linux Media Controller development
 help / color / mirror / Atom feed
From: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
To: linux-media@vger.kernel.org
Cc: mchehab@osg.samsung.com, Hans Verkuil <hverkuil@xs4all.nl>,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Subject: [PATCH 2/2] tw686x: Support VIDIOC_{S,G}_PARM ioctls
Date: Tue, 28 Jun 2016 23:17:35 -0300	[thread overview]
Message-ID: <20160629021735.24463-2-ezequiel@vanguardiasur.com.ar> (raw)
In-Reply-To: <20160629021735.24463-1-ezequiel@vanguardiasur.com.ar>

Now that the frame rate can be properly set, this commit adds support
for S_PARM and G_PARM.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
---
 drivers/media/pci/tw686x/tw686x-video.c | 46 ++++++++++++++++++++++++++++++---
 1 file changed, 43 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/tw686x/tw686x-video.c b/drivers/media/pci/tw686x/tw686x-video.c
index 3131f9305313..40b5b835d452 100644
--- a/drivers/media/pci/tw686x/tw686x-video.c
+++ b/drivers/media/pci/tw686x/tw686x-video.c
@@ -437,9 +437,6 @@ static void tw686x_set_framerate(struct tw686x_video_channel *vc,
 {
 	unsigned int i;
 
-	if (vc->fps == fps)
-		return;
-
 	i = tw686x_fps_idx(fps, TW686X_MAX_FPS(vc->video_standard));
 	reg_write(vc->dev, VIDEO_FIELD_CTRL[vc->ch], fps_map[i]);
 	vc->fps = tw686x_real_fps(i, TW686X_MAX_FPS(vc->video_standard));
@@ -843,6 +840,12 @@ static int tw686x_s_std(struct file *file, void *priv, v4l2_std_id id)
 	ret = tw686x_g_fmt_vid_cap(file, priv, &f);
 	if (!ret)
 		tw686x_s_fmt_vid_cap(file, priv, &f);
+
+	/*
+	 * Frame decimation depends on the chosen standard,
+	 * so reset it to the current value.
+	 */
+	tw686x_set_framerate(vc, vc->fps);
 	return 0;
 }
 
@@ -912,6 +915,40 @@ static int tw686x_g_std(struct file *file, void *priv, v4l2_std_id *id)
 	return 0;
 }
 
+static int tw686x_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *sp)
+{
+	struct tw686x_video_channel *vc = video_drvdata(file);
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+
+	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	sp->parm.capture.readbuffers = 3;
+
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	cp->timeperframe.numerator = 1;
+	cp->timeperframe.denominator = vc->fps;
+	return 0;
+}
+
+static int tw686x_s_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *sp)
+{
+	struct tw686x_video_channel *vc = video_drvdata(file);
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+	unsigned int denominator = cp->timeperframe.denominator;
+	unsigned int numerator = cp->timeperframe.numerator;
+	unsigned int fps;
+
+	if (vb2_is_busy(&vc->vidq))
+		return -EBUSY;
+
+	fps = (!numerator || !denominator) ? 0 : denominator / numerator;
+	if (vc->fps != fps)
+		tw686x_set_framerate(vc, fps);
+	return tw686x_g_parm(file, priv, sp);
+}
+
 static int tw686x_enum_fmt_vid_cap(struct file *file, void *priv,
 				   struct v4l2_fmtdesc *f)
 {
@@ -998,6 +1035,9 @@ static const struct v4l2_ioctl_ops tw686x_video_ioctl_ops = {
 	.vidioc_g_std			= tw686x_g_std,
 	.vidioc_s_std			= tw686x_s_std,
 
+	.vidioc_g_parm			= tw686x_g_parm,
+	.vidioc_s_parm			= tw686x_s_parm,
+
 	.vidioc_enum_input		= tw686x_enum_input,
 	.vidioc_g_input			= tw686x_g_input,
 	.vidioc_s_input			= tw686x_s_input,
-- 
2.9.0


  reply	other threads:[~2016-06-29  2:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-29  2:17 [PATCH 1/2] tw686x: use a formula instead of two tables for div Ezequiel Garcia
2016-06-29  2:17 ` Ezequiel Garcia [this message]
2016-07-01 10:46   ` [PATCH 2/2] tw686x: Support VIDIOC_{S,G}_PARM ioctls Hans Verkuil
2016-07-04 14:38     ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160629021735.24463-2-ezequiel@vanguardiasur.com.ar \
    --to=ezequiel@vanguardiasur.com.ar \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@osg.samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox