public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Nick Dyer <nick@shmanahar.org>, Hans Verkuil <hverkuil@xs4all.nl>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-media@vger.kernel.org,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Benson Leung <bleung@chromium.org>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Chris Healy <cphealy@gmail.com>,
	Henrik Rydberg <rydberg@bitmath.org>,
	Andrew Duggan <aduggan@synaptics.com>,
	James Chen <james.chen@emc.com.tw>, Dudley Du <dudl@cypress.com>,
	Andrew de los Reyes <adlr@chromium.org>,
	sheckylin@chromium.org, Peter Hutterer <peter.hutterer@who-t.net>,
	Florian Echtler <floe@butterbrot.org>
Subject: Re: [PATCH v8 03/10] Input: atmel_mxt_ts - add support for T37 diagnostic data
Date: Tue, 23 Aug 2016 16:30:47 -0300	[thread overview]
Message-ID: <20160823163047.0ba303cc@vento.lan> (raw)
In-Reply-To: <1468876238-24599-4-git-send-email-nick@shmanahar.org>

Hi Dmitry,

Em Mon, 18 Jul 2016 22:10:31 +0100
Nick Dyer <nick@shmanahar.org> escreveu:

> Atmel maXTouch devices have a T37 object which can be used to read raw
> touch deltas from the device. This consists of an array of 16-bit
> integers, one for each node on the touchscreen matrix.

Is it ok to merge this patch (and the other patches on this series)
via my tree?

Regards,
Mauro

> 
> Signed-off-by: Nick Dyer <nick@shmanahar.org>
> ---
>  drivers/input/touchscreen/Kconfig        |    6 ++
>  drivers/input/touchscreen/atmel_mxt_ts.c |  159 ++++++++++++++++++++++++++++++
>  2 files changed, 165 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 8ecdc38..da96ecf 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -115,6 +115,12 @@ config TOUCHSCREEN_ATMEL_MXT
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called atmel_mxt_ts.
>  
> +config TOUCHSCREEN_ATMEL_MXT_T37
> +	bool "Support T37 Diagnostic Data"
> +	depends on TOUCHSCREEN_ATMEL_MXT
> +	help
> +	  Say Y here if you want support for the T37 Diagnostic Data object.
> +
>  config TOUCHSCREEN_AUO_PIXCIR
>  	tristate "AUO in-cell touchscreen using Pixcir ICs"
>  	depends on I2C
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 5af7907..0048233 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -124,6 +124,19 @@ struct t9_range {
>  #define MXT_COMMS_CTRL		0
>  #define MXT_COMMS_CMD		1
>  
> +/* MXT_DEBUG_DIAGNOSTIC_T37 */
> +#define MXT_DIAGNOSTIC_PAGEUP	0x01
> +#define MXT_DIAGNOSTIC_DELTAS	0x10
> +#define MXT_DIAGNOSTIC_SIZE	128
> +
> +struct t37_debug {
> +#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
> +	u8 mode;
> +	u8 page;
> +	u8 data[MXT_DIAGNOSTIC_SIZE];
> +#endif
> +};
> +
>  /* Define for MXT_GEN_COMMAND_T6 */
>  #define MXT_BOOT_VALUE		0xa5
>  #define MXT_RESET_VALUE		0x01
> @@ -205,6 +218,14 @@ struct mxt_object {
>  	u8 num_report_ids;
>  } __packed;
>  
> +struct mxt_dbg {
> +	u16 t37_address;
> +	u16 diag_cmd_address;
> +	struct t37_debug *t37_buf;
> +	unsigned int t37_pages;
> +	unsigned int t37_nodes;
> +};
> +
>  /* Each client has this additional data */
>  struct mxt_data {
>  	struct i2c_client *client;
> @@ -233,6 +254,7 @@ struct mxt_data {
>  	u8 num_touchids;
>  	u8 multitouch;
>  	struct t7_config t7_cfg;
> +	struct mxt_dbg dbg;
>  
>  	/* Cached parameters from object table */
>  	u16 T5_address;
> @@ -2043,6 +2065,141 @@ recheck:
>  	return 0;
>  }
>  
> +#ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
> +static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x,
> +			       unsigned int y)
> +{
> +	struct mxt_dbg *dbg = &data->dbg;
> +	unsigned int ofs, page;
> +
> +	ofs = (y + (x * data->info.matrix_ysize)) * sizeof(u16);
> +	page = ofs / MXT_DIAGNOSTIC_SIZE;
> +	ofs %= MXT_DIAGNOSTIC_SIZE;
> +
> +	return get_unaligned_le16(&dbg->t37_buf[page].data[ofs]);
> +}
> +
> +static int mxt_convert_debug_pages(struct mxt_data *data, u16 *outbuf)
> +{
> +	struct mxt_dbg *dbg = &data->dbg;
> +	unsigned int x = 0;
> +	unsigned int y = 0;
> +	unsigned int i;
> +
> +	for (i = 0; i < dbg->t37_nodes; i++) {
> +		outbuf[i] = mxt_get_debug_value(data, x, y);
> +
> +		/* Next value */
> +		if (++x >= data->info.matrix_xsize) {
> +			x = 0;
> +			y++;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int mxt_read_diagnostic_debug(struct mxt_data *data, u8 mode,
> +				     u16 *outbuf)
> +{
> +	struct mxt_dbg *dbg = &data->dbg;
> +	int retries = 0;
> +	int page;
> +	int ret;
> +	u8 cmd = mode;
> +	struct t37_debug *p;
> +	u8 cmd_poll;
> +
> +	for (page = 0; page < dbg->t37_pages; page++) {
> +		p = dbg->t37_buf + page;
> +
> +		ret = mxt_write_reg(data->client, dbg->diag_cmd_address,
> +				    cmd);
> +		if (ret)
> +			return ret;
> +
> +		retries = 0;
> +		msleep(20);
> +wait_cmd:
> +		/* Read back command byte */
> +		ret = __mxt_read_reg(data->client, dbg->diag_cmd_address,
> +				     sizeof(cmd_poll), &cmd_poll);
> +		if (ret)
> +			return ret;
> +
> +		/* Field is cleared once the command has been processed */
> +		if (cmd_poll) {
> +			if (retries++ > 100)
> +				return -EINVAL;
> +
> +			msleep(20);
> +			goto wait_cmd;
> +		}
> +
> +		/* Read T37 page */
> +		ret = __mxt_read_reg(data->client, dbg->t37_address,
> +				     sizeof(struct t37_debug), p);
> +		if (ret)
> +			return ret;
> +
> +		if (p->mode != mode || p->page != page) {
> +			dev_err(&data->client->dev, "T37 page mismatch\n");
> +			return -EINVAL;
> +		}
> +
> +		dev_dbg(&data->client->dev, "%s page:%d retries:%d\n",
> +			__func__, page, retries);
> +
> +		/* For remaining pages, write PAGEUP rather than mode */
> +		cmd = MXT_DIAGNOSTIC_PAGEUP;
> +	}
> +
> +	return mxt_convert_debug_pages(data, outbuf);
> +}
> +
> +static void mxt_debug_init(struct mxt_data *data)
> +{
> +	struct mxt_dbg *dbg = &data->dbg;
> +	struct mxt_object *object;
> +
> +	object = mxt_get_object(data, MXT_GEN_COMMAND_T6);
> +	if (!object)
> +		goto error;
> +
> +	dbg->diag_cmd_address = object->start_address + MXT_COMMAND_DIAGNOSTIC;
> +
> +	object = mxt_get_object(data, MXT_DEBUG_DIAGNOSTIC_T37);
> +	if (!object)
> +		goto error;
> +
> +	if (mxt_obj_size(object) != sizeof(struct t37_debug)) {
> +		dev_warn(&data->client->dev, "Bad T37 size");
> +		goto error;
> +	}
> +
> +	dbg->t37_address = object->start_address;
> +
> +	/* Calculate size of data and allocate buffer */
> +	dbg->t37_nodes = data->info.matrix_xsize * data->info.matrix_ysize;
> +	dbg->t37_pages = DIV_ROUND_UP(dbg->t37_nodes * sizeof(u16),
> +				      sizeof(dbg->t37_buf->data));
> +
> +	dbg->t37_buf = devm_kmalloc_array(&data->client->dev, dbg->t37_pages,
> +					  sizeof(struct t37_debug), GFP_KERNEL);
> +	if (!dbg->t37_buf)
> +		goto error;
> +
> +	return;
> +
> +error:
> +	dev_warn(&data->client->dev, "Error initializing T37\n");
> +}
> +#else
> +static void mxt_debug_init(struct mxt_data *data)
> +{
> +}
> +#endif
> +
>  static int mxt_configure_objects(struct mxt_data *data,
>  				 const struct firmware *cfg)
>  {
> @@ -2070,6 +2227,8 @@ static int mxt_configure_objects(struct mxt_data *data,
>  		dev_warn(dev, "No touch object detected\n");
>  	}
>  
> +	mxt_debug_init(data);
> +
>  	dev_info(dev,
>  		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
>  		 info->family_id, info->variant_id, info->version >> 4,


-- 
Thanks,
Mauro

  reply	other threads:[~2016-08-23 19:30 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-18 21:10 [PATCH v8 0/10] Output raw touch data via V4L2 Nick Dyer
2016-07-18 21:10 ` [PATCH v8 01/10] Input: atmel_mxt_ts - update MAINTAINERS email address Nick Dyer
2016-07-18 21:10 ` [PATCH v8 02/10] v4l2-core: Add support for touch devices Nick Dyer
2016-07-18 21:10 ` [PATCH v8 03/10] Input: atmel_mxt_ts - add support for T37 diagnostic data Nick Dyer
2016-08-23 19:30   ` Mauro Carvalho Chehab [this message]
2016-08-23 19:51     ` Dmitry Torokhov
2016-07-18 21:10 ` [PATCH v8 04/10] Input: atmel_mxt_ts - output diagnostic debug via V4L2 device Nick Dyer
2016-07-18 21:10 ` [PATCH v8 05/10] Input: atmel_mxt_ts - read touchscreen size Nick Dyer
2016-07-18 21:10 ` [PATCH v8 06/10] Input: atmel_mxt_ts - handle diagnostic data orientation Nick Dyer
2016-07-18 21:10 ` [PATCH v8 07/10] Input: atmel_mxt_ts - add diagnostic data support for mXT1386 Nick Dyer
2016-07-18 21:10 ` [PATCH v8 08/10] Input: atmel_mxt_ts - add support for reference data Nick Dyer
2016-07-18 21:10 ` [PATCH v8 09/10] Input: synaptics-rmi4 - add support for F54 diagnostics Nick Dyer
2016-07-18 21:10 ` [PATCH v8 10/10] Input: sur40 - use new V4L2 touch input type Nick Dyer
2016-08-12  9:41   ` Hans Verkuil
2016-08-12 10:20     ` Nick Dyer
2016-07-18 21:11 ` [PATCH] Documentation: add support for V4L touch devices y
2016-08-12 10:06   ` Hans Verkuil
2016-08-14 19:57     ` [PATCH v2] " Nick Dyer
2016-07-18 21:12 ` [PATCH] v4l2-compliance: Changes to support touch sensors Nick Dyer
2016-07-20  7:48 ` [PATCH v8 0/10] Output raw touch data via V4L2 Hans Verkuil
2016-07-23  2:10   ` Chris Healy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160823163047.0ba303cc@vento.lan \
    --to=mchehab@osg.samsung.com \
    --cc=adlr@chromium.org \
    --cc=aduggan@synaptics.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bleung@chromium.org \
    --cc=cphealy@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dudl@cypress.com \
    --cc=floe@butterbrot.org \
    --cc=hverkuil@xs4all.nl \
    --cc=james.chen@emc.com.tw \
    --cc=javier@osg.samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=peter.hutterer@who-t.net \
    --cc=rydberg@bitmath.org \
    --cc=sheckylin@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox