From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <linux-media-owner@vger.kernel.org>
Received: from ec2-52-27-115-49.us-west-2.compute.amazonaws.com ([52.27.115.49]:46815
        "EHLO s-opensource.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S935495AbcIPPD3 (ORCPT
        <rfc822;linux-media@vger.kernel.org>);
        Fri, 16 Sep 2016 11:03:29 -0400
Date: Fri, 16 Sep 2016 12:03:22 -0300
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Wade Berrier <wberrier@gmail.com>, Sean Young <sean@mess.org>,
        <linux-media@vger.kernel.org>, <linux-usb@vger.kernel.org>
Subject: Re: mceusb xhci issue?
Message-ID: <20160916120322.466d23b8@vento.lan>
In-Reply-To: <Pine.LNX.4.44L0.1609161024350.1657-100000@iolanthe.rowland.org>
References: <20160915224804.GA14827@miniwade.localdomain>
        <Pine.LNX.4.44L0.1609161024350.1657-100000@iolanthe.rowland.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-media-owner@vger.kernel.org
List-ID: <linux-media.vger.kernel.org>

Em Fri, 16 Sep 2016 10:25:31 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> escreveu:

> On Thu, 15 Sep 2016, Wade Berrier wrote:
> 
> > On Thu Sep 15 15:13, Alan Stern wrote:  
> > > On Sat, 10 Sep 2016, Wade Berrier wrote:
> > >   
> > > > On Thu Aug 11 16:18, Alan Stern wrote:  
> > > > > I never received any replies to this message.  Should the patch I 
> > > > > suggested be merged?
> > > > >  
> > > > 
> > > > Hello,
> > > > 
> > > > I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> > > > transceiver works as expected.  
> > > 
> > > Thank you for testing.  Can you provide the "lsusb -v" output for the
> > > troublesome IR transceiver?
> > >   
> > 
> > Here's the output:
> > 
> > Bus 001 Device 006: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               2.00
> >   bDeviceClass            0 
> >   bDeviceSubClass         0 
> >   bDeviceProtocol         0 
> >   bMaxPacketSize0         8
> >   idVendor           0x1784 TopSeed Technology Corp.
> >   idProduct          0x0006 eHome Infrared Transceiver
> >   bcdDevice            1.02
> >   iManufacturer           1 TopSeed Technology Corp.
> >   iProduct                2 eHome Infrared Transceiver
> >   iSerial                 3 TS004RrP
> >   bNumConfigurations      1
> >   Configuration Descriptor:
> >     bLength                 9
> >     bDescriptorType         2
> >     wTotalLength           32
> >     bNumInterfaces          1
> >     bConfigurationValue     1
> >     iConfiguration          0 
> >     bmAttributes         0xa0
> >       (Bus Powered)
> >       Remote Wakeup
> >     MaxPower              100mA
> >     Interface Descriptor:
> >       bLength                 9
> >       bDescriptorType         4
> >       bInterfaceNumber        0
> >       bAlternateSetting       0
> >       bNumEndpoints           2
> >       bInterfaceClass       255 Vendor Specific Class
> >       bInterfaceSubClass    255 Vendor Specific Subclass
> >       bInterfaceProtocol    255 Vendor Specific Protocol
> >       iInterface              0 
> >       Endpoint Descriptor:
> >         bLength                 7
> >         bDescriptorType         5
> >         bEndpointAddress     0x01  EP 1 OUT
> >         bmAttributes            3
> >           Transfer Type            Interrupt
> >           Synch Type               None
> >           Usage Type               Data
> >         wMaxPacketSize     0x0020  1x 32 bytes
> >         bInterval               0  
> 
> And there's the problem.  0 is an invalid bInterval value for an 
> Interrupt endpoint.

Unfortunately, it is a know issue that some mceusb drivers have the
bInterval set to zero.

> > Device Status:     0x0001
> >   Self Powered
> > 
> > Wade  
> 
> Thank you.  The patch has been submitted.

Thanks!

Mauro