From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [RFCv2 PATCH 2/5] drm/bridge: dw_hdmi: remove CEC engine register definitions
Date: Mon, 14 Nov 2016 15:39:26 +0000 [thread overview]
Message-ID: <20161114153926.GO1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <1479136968-24477-3-git-send-email-hverkuil@xs4all.nl>
I can't comment on these, you've not included me in patch 1 nor the
covering message.
On Mon, Nov 14, 2016 at 04:22:45PM +0100, Hans Verkuil wrote:
> From: Russell King <rmk+kernel@arm.linux.org.uk>
>
> We don't need the CEC engine register definitions, so let's remove them.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ---
> drivers/gpu/drm/bridge/dw-hdmi.h | 45 ----------------------------------------
> 1 file changed, 45 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h
> index fc9a560..26d6845 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.h
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.h
> @@ -478,51 +478,6 @@
> #define HDMI_A_PRESETUP 0x501A
> #define HDMI_A_SRM_BASE 0x5020
>
> -/* CEC Engine Registers */
> -#define HDMI_CEC_CTRL 0x7D00
> -#define HDMI_CEC_STAT 0x7D01
> -#define HDMI_CEC_MASK 0x7D02
> -#define HDMI_CEC_POLARITY 0x7D03
> -#define HDMI_CEC_INT 0x7D04
> -#define HDMI_CEC_ADDR_L 0x7D05
> -#define HDMI_CEC_ADDR_H 0x7D06
> -#define HDMI_CEC_TX_CNT 0x7D07
> -#define HDMI_CEC_RX_CNT 0x7D08
> -#define HDMI_CEC_TX_DATA0 0x7D10
> -#define HDMI_CEC_TX_DATA1 0x7D11
> -#define HDMI_CEC_TX_DATA2 0x7D12
> -#define HDMI_CEC_TX_DATA3 0x7D13
> -#define HDMI_CEC_TX_DATA4 0x7D14
> -#define HDMI_CEC_TX_DATA5 0x7D15
> -#define HDMI_CEC_TX_DATA6 0x7D16
> -#define HDMI_CEC_TX_DATA7 0x7D17
> -#define HDMI_CEC_TX_DATA8 0x7D18
> -#define HDMI_CEC_TX_DATA9 0x7D19
> -#define HDMI_CEC_TX_DATA10 0x7D1a
> -#define HDMI_CEC_TX_DATA11 0x7D1b
> -#define HDMI_CEC_TX_DATA12 0x7D1c
> -#define HDMI_CEC_TX_DATA13 0x7D1d
> -#define HDMI_CEC_TX_DATA14 0x7D1e
> -#define HDMI_CEC_TX_DATA15 0x7D1f
> -#define HDMI_CEC_RX_DATA0 0x7D20
> -#define HDMI_CEC_RX_DATA1 0x7D21
> -#define HDMI_CEC_RX_DATA2 0x7D22
> -#define HDMI_CEC_RX_DATA3 0x7D23
> -#define HDMI_CEC_RX_DATA4 0x7D24
> -#define HDMI_CEC_RX_DATA5 0x7D25
> -#define HDMI_CEC_RX_DATA6 0x7D26
> -#define HDMI_CEC_RX_DATA7 0x7D27
> -#define HDMI_CEC_RX_DATA8 0x7D28
> -#define HDMI_CEC_RX_DATA9 0x7D29
> -#define HDMI_CEC_RX_DATA10 0x7D2a
> -#define HDMI_CEC_RX_DATA11 0x7D2b
> -#define HDMI_CEC_RX_DATA12 0x7D2c
> -#define HDMI_CEC_RX_DATA13 0x7D2d
> -#define HDMI_CEC_RX_DATA14 0x7D2e
> -#define HDMI_CEC_RX_DATA15 0x7D2f
> -#define HDMI_CEC_LOCK 0x7D30
> -#define HDMI_CEC_WKUPCTRL 0x7D31
> -
> /* I2C Master Registers (E-DDC) */
> #define HDMI_I2CM_SLAVE 0x7E00
> #define HDMI_I2CM_ADDRESS 0x7E01
> --
> 2.8.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2016-11-14 15:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 15:22 [RFCv2 PATCH 0/5] CEC drivers for iMX6 and TDA9950 Hans Verkuil
2016-11-14 15:22 ` [RFCv2 PATCH 1/5] video: add HDMI state notifier support Hans Verkuil
2016-11-15 18:24 ` Philipp Zabel
2016-11-15 20:41 ` Hans Verkuil
2016-11-16 9:43 ` Hans Verkuil
2016-12-01 10:09 ` Hans Verkuil
2016-11-14 15:22 ` [RFCv2 PATCH 2/5] drm/bridge: dw_hdmi: remove CEC engine register definitions Hans Verkuil
2016-11-14 15:39 ` Russell King - ARM Linux [this message]
2016-11-14 15:42 ` Hans Verkuil
2016-11-15 23:23 ` Pierre-Hugues Husson
2016-11-15 23:27 ` Russell King - ARM Linux
2016-11-15 23:35 ` Pierre-Hugues Husson
2016-11-14 15:22 ` [RFCv2 PATCH 3/5] drm/bridge: dw_hdmi: add HDMI notifier support Hans Verkuil
2016-11-15 23:21 ` Pierre-Hugues Husson
2017-02-05 0:22 ` Pierre-Hugues Husson
2016-11-14 15:22 ` [RFCv2 PATCH 4/5] drm/bridge: add dw-hdmi cec driver using Hans Verkuil's CEC code Hans Verkuil
2017-02-05 0:17 ` Pierre-Hugues Husson
2016-11-14 15:22 ` [RFCv2 PATCH 5/5] drm/i2c: add tda998x/tda9950 CEC driver Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161114153926.GO1041@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=dri-devel@lists.freedesktop.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).