linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benoit Parrot <bparrot@ti.com>
To: <linux-media@vger.kernel.org>, Hans Verkuil <hverkuil@xs4all.nl>
Cc: <linux-kernel@vger.kernel.org>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Jyri Sarha <jsarha@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Benoit Parrot <bparrot@ti.com>
Subject: [Patch v2 14/35] media: ti-vpe: vpdma: Clear IRQs for individual lists
Date: Fri, 18 Nov 2016 17:20:24 -0600	[thread overview]
Message-ID: <20161118232045.24665-15-bparrot@ti.com> (raw)
In-Reply-To: <20161118232045.24665-1-bparrot@ti.com>

From: Nikhil Devshatwar <nikhil.nd@ti.com>

VPDMA IRQs are registered for multiple lists
When clearing an IRQ for a list interrupt, all the
IRQs for the individual lists are to be cleared separately.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/ti-vpe/vpdma.c | 6 +++---
 drivers/media/platform/ti-vpe/vpdma.h | 3 ++-
 drivers/media/platform/ti-vpe/vpe.c   | 2 +-
 3 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
index ffc281d2b065..c0a4e035bc2a 100644
--- a/drivers/media/platform/ti-vpe/vpdma.c
+++ b/drivers/media/platform/ti-vpe/vpdma.c
@@ -953,12 +953,12 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num)
 EXPORT_SYMBOL(vpdma_get_list_mask);
 
 /* clear previosuly occured list intterupts in the LIST_STAT register */
-void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num)
+void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
+			   int list_num)
 {
 	u32 reg_addr = VPDMA_INT_LIST0_STAT + VPDMA_INTX_OFFSET * irq_num;
 
-	write_reg(vpdma, reg_addr,
-		read_reg(vpdma, reg_addr));
+	write_reg(vpdma, reg_addr, 3 << (list_num * 2));
 }
 EXPORT_SYMBOL(vpdma_clear_list_stat);
 
diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index f08f4370ce4a..65961147e8f7 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -244,7 +244,8 @@ int vpdma_list_cleanup(struct vpdma_data *vpdma, int list_num,
 /* vpdma list interrupt management */
 void vpdma_enable_list_complete_irq(struct vpdma_data *vpdma, int irq_num,
 		int list_num, bool enable);
-void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num);
+void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
+			   int list_num);
 unsigned int vpdma_get_list_stat(struct vpdma_data *vpdma, int irq_num);
 unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num);
 
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 151a9280bb85..6fcdd0ea50e4 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1326,7 +1326,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 
 	if (irqst0) {
 		if (irqst0 & VPE_INT0_LIST0_COMPLETE)
-			vpdma_clear_list_stat(ctx->dev->vpdma, 0);
+			vpdma_clear_list_stat(ctx->dev->vpdma, 0, 0);
 
 		irqst0 &= ~(VPE_INT0_LIST0_COMPLETE);
 	}
-- 
2.9.0


  parent reply	other threads:[~2016-11-18 23:21 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-18 23:20 [Patch v2 00/35] media: ti-vpe: fixes and enhancements Benoit Parrot
2016-11-18 23:20 ` [Patch v2 01/35] media: ti-vpe: vpdma: Make vpdma library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 02/35] media: ti-vpe: vpdma: Add multi-instance and multi-client support Benoit Parrot
2016-11-18 23:20 ` [Patch v2 03/35] media: ti-vpe: vpdma: Add helper to set a background color Benoit Parrot
2016-11-18 23:20 ` [Patch v2 04/35] media: ti-vpe: vpdma: Fix bus error when vpdma is writing a descriptor Benoit Parrot
2016-11-18 23:20 ` [Patch v2 05/35] media: ti-vpe: Use line average de-interlacing for first 2 frames Benoit Parrot
2016-11-18 23:20 ` [Patch v2 06/35] media: ti-vpe: vpe: Do not perform job transaction atomically Benoit Parrot
2016-11-18 23:20 ` [Patch v2 07/35] media: ti-vpe: Add support for SEQ_TB buffers Benoit Parrot
2016-11-18 23:20 ` [Patch v2 08/35] media: ti-vpe: Increasing max buffer height and width Benoit Parrot
2016-11-18 23:20 ` [Patch v2 09/35] media: ti-vpe: vpe: Return NULL for invalid buffer type Benoit Parrot
2016-11-18 23:20 ` [Patch v2 10/35] media: ti-vpe: Free vpdma buffers in vpe_release Benoit Parrot
2016-11-18 23:20 ` [Patch v2 11/35] media: ti-vpe: vpdma: Add support for setting max width height Benoit Parrot
2016-11-18 23:20 ` [Patch v2 12/35] media: ti-vpe: vpdma: Add abort channel desc and cleanup APIs Benoit Parrot
2016-11-18 23:20 ` [Patch v2 13/35] media: ti-vpe: vpdma: Make list post atomic operation Benoit Parrot
2016-11-18 23:20 ` Benoit Parrot [this message]
2016-11-18 23:20 ` [Patch v2 15/35] media: ti-vpe: vpe: configure line mode separately Benoit Parrot
2016-11-18 23:20 ` [Patch v2 16/35] media: ti-vpe: vpe: Setup srcdst parameters in start_streaming Benoit Parrot
2016-11-18 23:20 ` [Patch v2 17/35] media: ti-vpe: vpe: Post next descriptor only for list complete IRQ Benoit Parrot
2016-11-18 23:20 ` [Patch v2 18/35] media: ti-vpe: vpe: Add RGB565 and RGB5551 support Benoit Parrot
2016-11-18 23:20 ` [Patch v2 19/35] media: ti-vpe: vpdma: allocate and maintain hwlist Benoit Parrot
2016-11-18 23:20 ` [Patch v2 20/35] media: ti-vpe: vpe: Added MODULE_DEVICE_TABLE hint Benoit Parrot
2016-11-18 23:20 ` [Patch v2 21/35] media: ti-vpe: vpdma: Corrected YUV422 data type label Benoit Parrot
2016-11-18 23:20 ` [Patch v2 22/35] media: ti-vpe: vpdma: RGB data type yield inverted data Benoit Parrot
2016-11-18 23:20 ` [Patch v2 23/35] media: ti-vpe: sc: Fix incorrect optimization Benoit Parrot
2016-11-18 23:20 ` [Patch v2 24/35] media: ti-vpe: vpe: Fix vb2 buffer cleanup Benoit Parrot
2016-11-18 23:20 ` [Patch v2 25/35] media: ti-vpe: vpdma: Fix race condition for firmware loading Benoit Parrot
2016-11-18 23:20 ` [Patch v2 26/35] media: ti-vpe: vpdma: Use bidirectional cached buffers Benoit Parrot
2016-11-18 23:20 ` [Patch v2 27/35] media: ti-vpe: vpe: Fix line stride for output motion vector Benoit Parrot
2016-11-18 23:20 ` [Patch v2 28/35] media: ti-vpe: vpe: Enable DMABUF export Benoit Parrot
2016-11-18 23:20 ` [Patch v2 29/35] media: ti-vpe: Make scaler library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 30/35] media: ti-vpe: scaler: Add debug support for multi-instance Benoit Parrot
2016-11-18 23:20 ` [Patch v2 31/35] media: ti-vpe: vpe: Make sure frame size dont exceed scaler capacity Benoit Parrot
2016-11-18 23:20 ` [Patch v2 32/35] media: ti-vpe: vpdma: Add RAW8 and RAW16 data types Benoit Parrot
2016-11-18 23:20 ` [Patch v2 33/35] media: ti-vpe: Make colorspace converter library into its own module Benoit Parrot
2016-11-18 23:20 ` [Patch v2 34/35] media: ti-vpe: csc: Add debug support for multi-instance Benoit Parrot
2016-11-18 23:20 ` [Patch v2 35/35] media: ti-vpe: vpe: Add proper support single and multi-plane buffer Benoit Parrot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161118232045.24665-15-bparrot@ti.com \
    --to=bparrot@ti.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jsarha@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).