From: Oleh Kravchenko <oleg@kaa.org.ua>
To: Steven Toth <stoth@kernellabs.com>,
Linux Media Mailing List <linux-media@vger.kernel.org>,
Jacob Johan Verkuil <hverkuil@xs4all.nl>,
Antti Palosaari <crope@iki.fi>
Cc: Oleh Kravchenko <oleg@kaa.org.ua>
Subject: [PATCH] [media] cx231xx: Initial support Evromedia USB Full Hybrid Full HD
Date: Sun, 29 Jan 2017 20:03:51 +0200 [thread overview]
Message-ID: <20170129180351.8482-1-oleg@kaa.org.ua> (raw)
This patch provide only digital support.
The device is based on Si2168 30-demodulator,
Si2158-20 tuner and CX23102-11Z chipset;
USB id: 1b80:d3b2.
Status:
- DVB-T2 works fine;
- Composite and SVideo works fine;
- Analog not implemented.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Tested-by: Oleh Kravchenko <oleg@kaa.org.ua>
---
drivers/media/usb/cx231xx/Kconfig | 1 +
drivers/media/usb/cx231xx/cx231xx-cards.c | 29 +++++++++++++
drivers/media/usb/cx231xx/cx231xx-dvb.c | 70 +++++++++++++++++++++++++++++++
drivers/media/usb/cx231xx/cx231xx.h | 1 +
4 files changed, 101 insertions(+)
diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig
index 0cced3e..58de80b 100644
--- a/drivers/media/usb/cx231xx/Kconfig
+++ b/drivers/media/usb/cx231xx/Kconfig
@@ -50,6 +50,7 @@ config VIDEO_CX231XX_DVB
select DVB_LGDT3306A if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
---help---
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 36bc254..f730fdb 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -841,6 +841,33 @@ struct cx231xx_board cx231xx_boards[] = {
.gpio = NULL,
} },
},
+ [CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD] = {
+ .name = "Evromedia USB Full Hybrid Full HD",
+ .tuner_type = TUNER_ABSENT,
+ .demod_addr = 0x64, /* 0xc8 >> 1 */
+ .demod_i2c_master = I2C_1_MUX_3,
+ .has_dvb = 1,
+ .ir_i2c_master = I2C_0,
+ .norm = V4L2_STD_PAL,
+ .output_mode = OUT_MODE_VIP11,
+ .tuner_addr = 0x60, /* 0xc0 >> 1 */
+ .tuner_i2c_master = I2C_2,
+ .input = {{
+ .type = CX231XX_VMUX_TELEVISION,
+ .vmux = 0,
+ .amux = CX231XX_AMUX_VIDEO,
+ }, {
+ .type = CX231XX_VMUX_COMPOSITE1,
+ .vmux = CX231XX_VIN_2_1,
+ .amux = CX231XX_AMUX_LINE_IN,
+ }, {
+ .type = CX231XX_VMUX_SVIDEO,
+ .vmux = CX231XX_VIN_1_1 |
+ (CX231XX_VIN_1_2 << 8) |
+ CX25840_SVIDEO_ON,
+ .amux = CX231XX_AMUX_LINE_IN,
+ } },
+ },
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
@@ -908,6 +935,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_OTG102},
{USB_DEVICE(USB_VID_TERRATEC, 0x00a6),
.driver_info = CX231XX_BOARD_TERRATEC_GRABBY},
+ {USB_DEVICE(0x1b80, 0xd3b2),
+ .driver_info = CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD},
{},
};
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index 2868546..46427fd 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -33,6 +33,7 @@
#include "s5h1411.h"
#include "lgdt3305.h"
#include "si2165.h"
+#include "si2168.h"
#include "mb86a20s.h"
#include "si2157.h"
#include "lgdt3306a.h"
@@ -949,6 +950,75 @@ static int dvb_init(struct cx231xx *dev)
&pv_tda18271_config);
break;
+ case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
+ {
+ struct si2157_config si2157_config = {};
+ struct si2168_config si2168_config = {};
+ struct i2c_board_info info = {};
+ struct i2c_client *client;
+ struct i2c_adapter *adapter;
+
+ /* attach demodulator chip */
+ si2168_config.ts_mode = SI2168_TS_SERIAL; /* from *.inf file */
+ si2168_config.fe = &dev->dvb->frontend;
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.ts_clock_inv = true;
+
+ strlcpy(info.type, "si2168", sizeof(info.type));
+ info.addr = dev->board.demod_addr;
+ info.platform_data = &si2168_config;
+
+ request_module(info.type);
+ client = i2c_new_device(demod_i2c, &info);
+
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+
+ /* attach tuner chip */
+ si2157_config.fe = dev->dvb->frontend;
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ si2157_config.mdev = dev->media_dev;
+#endif
+ si2157_config.if_port = 1;
+ si2157_config.inversion = false;
+
+ memset(&info, 0, sizeof(info));
+ strlcpy(info.type, "si2157", sizeof(info.type));
+ info.addr = dev->board.tuner_addr;
+ info.platform_data = &si2157_config;
+
+ request_module(info.type);
+ client = i2c_new_device(tuner_i2c, &info);
+
+ if (client == NULL || client->dev.driver == NULL) {
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dev->cx231xx_reset_analog_tuner = NULL;
+ dev->dvb->i2c_client_tuner = client;
+ break;
+ }
default:
dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index 90c8676..d9792ea 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -78,6 +78,7 @@
#define CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx 20
#define CX231XX_BOARD_HAUPPAUGE_955Q 21
#define CX231XX_BOARD_TERRATEC_GRABBY 22
+#define CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD 23
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
--
2.10.2
next reply other threads:[~2017-01-29 18:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-29 18:03 Oleh Kravchenko [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-01-11 10:08 [PATCH] [media] cx231xx: Initial support Evromedia USB Full Hybrid Full HD Oleh Kravchenko
2017-01-11 13:53 ` Steven Toth
2017-01-11 14:00 ` Oleh Kravchenko
2017-01-11 14:13 ` Steven Toth
2017-01-10 21:41 Oleh Kravchenko
2017-01-11 0:16 ` Antti Palosaari
2017-01-11 7:28 ` Oleh Kravchenko
2017-01-09 21:41 Oleh Kravchenko
2017-01-09 15:23 Oleh Kravchenko
2017-01-09 16:59 ` Antti Palosaari
2017-01-09 21:49 ` Oleh Kravchenko
2017-01-09 22:35 ` Antti Palosaari
2017-01-09 20:08 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170129180351.8482-1-oleg@kaa.org.ua \
--to=oleg@kaa.org.ua \
--cc=crope@iki.fi \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=stoth@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox