Re: [PATCH v1 3/3] [media] st-delta: add mpeg2 support

[Mauro Carvalho Chehab <mchehab@s-opensource.com>]

Em Mon, 30 Jan 2017 11:57:29 +0100
Hugues Fruchet <hugues.fruchet@st.com> escreveu:

> Adds support of DELTA MPEG-2 video decoder back-end,
> implemented by calling MPEG2_TRANSFORMER0 firmware
> using RPMSG IPC communication layer.
> MPEG-2 decoder back-end is a stateless decoder which
> require specific parsing metadata in access unit
> in order to complete decoding.
> 
> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
> ---
>  drivers/media/platform/Kconfig                     |    6 +
>  drivers/media/platform/sti/delta/Makefile          |    3 +
>  drivers/media/platform/sti/delta/delta-cfg.h       |    5 +
>  drivers/media/platform/sti/delta/delta-mpeg2-dec.c | 1392 ++++++++++++++++++++
>  drivers/media/platform/sti/delta/delta-mpeg2-fw.h  |  415 ++++++
>  drivers/media/platform/sti/delta/delta-v4l2.c      |    4 +
>  6 files changed, 1825 insertions(+)
>  create mode 100644 drivers/media/platform/sti/delta/delta-mpeg2-dec.c
>  create mode 100644 drivers/media/platform/sti/delta/delta-mpeg2-fw.h
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 9e71a7b..0472939 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -323,6 +323,12 @@ config VIDEO_STI_DELTA_MJPEG
>  	help
>  		Enables DELTA MJPEG hardware support.
>  
> +config VIDEO_STI_DELTA_MPEG2
> +	bool "STMicroelectronics DELTA MPEG2/MPEG1 support"
> +	default y
> +	help
> +		Enables DELTA MPEG2 hardware support.
> +
>  endif # VIDEO_STI_DELTA

This patch needs to be rebased, as you need to adjust the dependencies
on VIDEO_STI_DELTA_DRIVER for it to depend also on this driver.

Regards,
Mauro


Thanks,
Mauro