From: Derek Robson <robsonde@gmail.com>
To: mchehab@kernel.org, gregkh@linuxfoundation.org,
robsonde@gmail.com, thaissa.falbo@gmail.com,
karniksayli1995@gmail.com, bhaktipriya96@gmail.com,
laurent.pinchart@ideasonboard.com, arnd@arndb.de,
gnudevliz@gmail.com, aryasaatvik@gmail.com,
janani.rvchndrn@gmail.com
Cc: linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: media: davinci_vpfe - style fix
Date: Sat, 11 Feb 2017 11:28:25 +1300 [thread overview]
Message-ID: <20170210222825.23390-1-robsonde@gmail.com> (raw)
Fixed alignment of block commenents across whole driver.
Found using checkpatch.
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
.../staging/media/davinci_vpfe/davinci_vpfe_user.h | 24 +++++++++++-----------
.../staging/media/davinci_vpfe/dm365_ipipe_hw.c | 4 ++--
.../staging/media/davinci_vpfe/dm365_isif_regs.h | 20 +++++++++---------
drivers/staging/media/davinci_vpfe/dm365_resizer.c | 6 +++---
4 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/media/davinci_vpfe/davinci_vpfe_user.h b/drivers/staging/media/davinci_vpfe/davinci_vpfe_user.h
index d3f34f9bf712..7cc115c9ebe6 100644
--- a/drivers/staging/media/davinci_vpfe/davinci_vpfe_user.h
+++ b/drivers/staging/media/davinci_vpfe/davinci_vpfe_user.h
@@ -155,8 +155,8 @@ struct vpfe_isif_dfc {
};
/************************************************************************
-* Digital/Black clamp or DC Subtract parameters
-************************************************************************/
+ * Digital/Black clamp or DC Subtract parameters
+ ************************************************************************/
/**
* Horizontal Black Clamp modes
*/
@@ -309,8 +309,8 @@ struct vpfe_isif_black_clamp {
};
/*************************************************************************
-** Color Space Conversion (CSC)
-*************************************************************************/
+ ** Color Space Conversion (CSC)
+ *************************************************************************/
/**
* Number of Coefficient values used for CSC
*/
@@ -331,8 +331,8 @@ struct float_16_bit {
};
/*************************************************************************
-** Color Space Conversion parameters
-*************************************************************************/
+ ** Color Space Conversion parameters
+ *************************************************************************/
/**
* Structure used for CSC config params
*/
@@ -365,8 +365,8 @@ enum vpfe_isif_datasft {
#define VPFE_ISIF_LINEAR_TAB_SIZE 192
/*************************************************************************
-** Linearization parameters
-*************************************************************************/
+ ** Linearization parameters
+ *************************************************************************/
/**
* Structure for Sensor data linearization
*/
@@ -382,8 +382,8 @@ struct vpfe_isif_linearize {
};
/*************************************************************************
-** ISIF Raw configuration parameters
-*************************************************************************/
+ ** ISIF Raw configuration parameters
+ *************************************************************************/
enum vpfe_isif_fmt_mode {
VPFE_ISIF_SPLIT,
VPFE_ISIF_COMBINE
@@ -1189,8 +1189,8 @@ struct vpfe_ipipe_config {
};
/*******************************************************************
-** Resizer API structures
-*******************************************************************/
+ ** Resizer API structures
+ *******************************************************************/
/* Interpolation types used for horizontal rescale */
enum vpfe_rsz_intp_t {
VPFE_RSZ_INTP_CUBIC,
diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c
index 958ef71ee4d5..a893072d0f04 100644
--- a/drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c
+++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c
@@ -1003,8 +1003,8 @@ void ipipe_set_car_regs(void __iomem *base_addr, struct vpfe_ipipe_car *car)
ipipe_set_mf(base_addr);
ipipe_set_gain_ctrl(base_addr, car);
/* Set the threshold for switching between
- * the two Here we overwrite the MF SW0 value
- */
+ * the two Here we overwrite the MF SW0 value
+ */
regw_ip(base_addr, VPFE_IPIPE_CAR_DYN_SWITCH, CAR_TYP);
val = car->sw1;
val <<= CAR_SW1_SHIFT;
diff --git a/drivers/staging/media/davinci_vpfe/dm365_isif_regs.h b/drivers/staging/media/davinci_vpfe/dm365_isif_regs.h
index 8aceabb43f8e..64fbb459baa2 100644
--- a/drivers/staging/media/davinci_vpfe/dm365_isif_regs.h
+++ b/drivers/staging/media/davinci_vpfe/dm365_isif_regs.h
@@ -59,8 +59,8 @@
#define REC656IF 0x84
#define CCDCFG 0x88
/*****************************************************
-* Defect Correction registers
-*****************************************************/
+ * Defect Correction registers
+ *****************************************************/
#define DFCCTL 0x8c
#define VDFSATLV 0x90
#define DFCMEMCTL 0x94
@@ -70,8 +70,8 @@
#define DFCMEM3 0xa4
#define DFCMEM4 0xa8
/****************************************************
-* Black Clamp registers
-****************************************************/
+ * Black Clamp registers
+ ****************************************************/
#define CLAMPCFG 0xac
#define CLDCOFST 0xb0
#define CLSV 0xb4
@@ -84,8 +84,8 @@
#define CLVWIN2 0xd0
#define CLVWIN3 0xd4
/****************************************************
-* Lense Shading Correction
-****************************************************/
+ * Lense Shading Correction
+ ****************************************************/
#define DATAHOFST 0xd8
#define DATAVOFST 0xdc
#define LSCHVAL 0xe0
@@ -102,8 +102,8 @@
#define TWODLSCIRQEN 0x10c
#define TWODLSCIRQST 0x110
/****************************************************
-* Data formatter
-****************************************************/
+ * Data formatter
+ ****************************************************/
#define FMTCFG 0x114
#define FMTPLEN 0x118
#define FMTSPH 0x11c
@@ -128,8 +128,8 @@
#define FMTPGMAPS6 0x19c
#define FMTPGMAPS7 0x1a0
/************************************************
-* Color Space Converter
-************************************************/
+ * Color Space Converter
+ ************************************************/
#define CSCCTL 0x1a4
#define CSCM0 0x1a8
#define CSCM1 0x1ac
diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.c b/drivers/staging/media/davinci_vpfe/dm365_resizer.c
index 5fbc2d447ff2..857b0e847c5e 100644
--- a/drivers/staging/media/davinci_vpfe/dm365_resizer.c
+++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.c
@@ -1133,9 +1133,9 @@ void vpfe_resizer_buffer_isr(struct vpfe_resizer_device *resizer)
}
} else if (fid == 0) {
/*
- * out of sync. Recover from any hardware out-of-sync.
- * May loose one frame
- */
+ * out of sync. Recover from any hardware out-of-sync.
+ * May loose one frame
+ */
video_out->field_id = fid;
}
}
--
2.11.1
reply other threads:[~2017-02-10 22:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170210222825.23390-1-robsonde@gmail.com \
--to=robsonde@gmail.com \
--cc=arnd@arndb.de \
--cc=aryasaatvik@gmail.com \
--cc=bhaktipriya96@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gnudevliz@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=janani.rvchndrn@gmail.com \
--cc=karniksayli1995@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=thaissa.falbo@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox