linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Scheller <d.scheller.oss@gmail.com>
To: linux-media@vger.kernel.org, mchehab@kernel.org
Cc: liplianin@netup.ru, rjkm@metzlerbros.de, crope@iki.fi
Subject: [PATCH v3 01/13] [media] dvb-frontends/stv0367: add flag to make i2c_gatectrl optional
Date: Wed, 29 Mar 2017 18:43:01 +0200	[thread overview]
Message-ID: <20170329164313.14636-2-d.scheller.oss@gmail.com> (raw)
In-Reply-To: <20170329164313.14636-1-d.scheller.oss@gmail.com>

From: Daniel Scheller <d.scheller@gmx.net>

Some hardware and bridges (namely ddbridge) require that tuner access is
limited to one concurrent access and wrap i2c gate control with a
mutex_lock when attaching frontends. According to vendor information, this
is required as concurrent tuner reconfiguration can interfere each other
and at worst cause tuning fails or bad reception quality.

If the demod driver does gate_ctrl before setting up tuner parameters, and
the tuner does another I2C enable, it will deadlock forever when gate_ctrl
is wrapped into the mutex_lock. This adds a flag and a conditional before
triggering gate_ctrl in the demodulator driver.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
---
 drivers/media/dvb-frontends/stv0367.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index fd49c43..fc80934 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -89,6 +89,8 @@ struct stv0367_state {
 	struct stv0367cab_state *cab_state;
 	/* DVB-T */
 	struct stv0367ter_state *ter_state;
+	/* flags for operation control */
+	u8 use_i2c_gatectrl;
 };
 
 struct st_register {
@@ -1827,10 +1829,10 @@ static int stv0367ter_set_frontend(struct dvb_frontend *fe)
 	stv0367ter_init(fe);
 
 	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
+		if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
 		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
+		if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
@@ -2321,6 +2323,9 @@ struct dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
 	state->fe.demodulator_priv = state;
 	state->chip_id = stv0367_readreg(state, 0xf000);
 
+	/* demod operation options */
+	state->use_i2c_gatectrl = 1;
+
 	dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
 
 	/* check if the demod is there */
@@ -3120,10 +3125,10 @@ static int stv0367cab_set_frontend(struct dvb_frontend *fe)
 
 	/* Tuner Frequency Setting */
 	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl)
+		if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
 		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl)
+		if (state->use_i2c_gatectrl && fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
@@ -3437,6 +3442,9 @@ struct dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
 	state->fe.demodulator_priv = state;
 	state->chip_id = stv0367_readreg(state, 0xf000);
 
+	/* demod operation options */
+	state->use_i2c_gatectrl = 1;
+
 	dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
 
 	/* check if the demod is there */
-- 
2.10.2

  reply	other threads:[~2017-03-29 16:43 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-29 16:43 [PATCH v3 00/13] stv0367/ddbridge: support CTv6/FlexCT hardware Daniel Scheller
2017-03-29 16:43 ` Daniel Scheller [this message]
2017-03-29 16:43 ` [PATCH v3 02/13] [media] dvb-frontends/stv0367: print CPAMP status only if stv_debug is enabled Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 03/13] [media] dvb-frontends/stv0367: refactor defaults table handling Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 04/13] [media] dvb-frontends/stv0367: move out tables, support multiple tab variants Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 05/13] [media] dvb-frontends/stv0367: make PLLSETUP a function, add 58MHz IC speed Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 06/13] [media] dvb-frontends/stv0367: make full reinit on set_frontend() optional Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 07/13] [media] dvb-frontends/stv0367: support reading if_khz from tuner config Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 08/13] [media] dvb-frontends/stv0367: selectable QAM FEC Lock status register Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 09/13] [media] dvb-frontends/stv0367: fix symbol rate conditions in cab_SetQamSize() Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 10/13] [media] dvb-frontends/stv0367: add defaults for use w/DD-branded devices Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 11/13] [media] dvb-frontends/stv0367: add Digital Devices compatibility Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 12/13] [media] ddbridge: add i2c_read_regs() Daniel Scheller
2017-03-29 16:43 ` [PATCH v3 13/13] [media] ddbridge: support STV0367-based cards and modules Daniel Scheller
2017-04-12 19:23 ` [PATCH v3 00/13] stv0367/ddbridge: support CTv6/FlexCT hardware Daniel Scheller
2017-05-07 15:42   ` Daniel Scheller
2017-05-28 21:45     ` Daniel Scheller
2017-06-19 20:18       ` Daniel Scheller
2017-06-19 22:14         ` Jasmin J.
2017-06-20  6:13           ` Thomas Kaiser
2017-06-20 12:36         ` Mauro Carvalho Chehab
2017-06-20 18:41           ` DD support improvements (was: Re: [PATCH v3 00/13] stv0367/ddbridge: support CTv6/FlexCT hardware) Daniel Scheller
2017-06-20 19:10             ` Mauro Carvalho Chehab
2017-06-21 20:57               ` Daniel Scheller
2017-06-22 21:35                 ` Ralph Metzler
2017-06-24 16:50                   ` Mauro Carvalho Chehab
2017-06-25 17:52                     ` Daniel Scheller
2017-06-26  9:19                       ` Mauro Carvalho Chehab
2017-06-26  9:59                         ` Ralph Metzler
2017-06-26 10:14                           ` Mauro Carvalho Chehab
2017-06-26 15:22                           ` Daniel Scheller
2017-06-27  5:38                             ` Ralph Metzler
2017-07-20 15:19                               ` Mauro Carvalho Chehab
2017-06-26 15:43                         ` Daniel Scheller
2017-06-26  9:45                     ` Ralph Metzler
2017-06-26 10:46                       ` Mauro Carvalho Chehab
2017-07-11 18:12                         ` Ralph Metzler
2017-07-20 15:36                           ` Mauro Carvalho Chehab
2017-06-26 18:41                       ` Daniel Scheller
2017-06-20 20:54           ` [PATCH v3 00/13] stv0367/ddbridge: support CTv6/FlexCT hardware Jasmin J.

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170329164313.14636-2-d.scheller.oss@gmail.com \
    --to=d.scheller.oss@gmail.com \
    --cc=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=liplianin@netup.ru \
    --cc=mchehab@kernel.org \
    --cc=rjkm@metzlerbros.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).