linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hverkuil@xs4all.nl>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	tomoharu.fukawa.eb@renesas.com,
	"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH v2 03/17] rcar-vin: fix how pads are handled for v4l2 subdevice operations
Date: Wed, 24 May 2017 02:15:26 +0200	[thread overview]
Message-ID: <20170524001540.13613-4-niklas.soderlund@ragnatech.se> (raw)
In-Reply-To: <20170524001540.13613-1-niklas.soderlund@ragnatech.se>

From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

The rcar-vin driver only uses one pad, pad number 0.

- All v4l2 operations that did not check that the requested operation
  was for pad 0 have been updated with a check to enforce this.

- All v4l2 operations that stored (and later restored) the requested pad
  before substituting it for the subdevice pad number have been updated
  to not store the incoming pad and simply restore it to 0 after the
  subdevice operation is complete.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 7ca27599b9982ffc..610f59e2a9142622 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -550,14 +550,16 @@ static int rvin_enum_dv_timings(struct file *file, void *priv_fh,
 {
 	struct rvin_dev *vin = video_drvdata(file);
 	struct v4l2_subdev *sd = vin_to_source(vin);
-	int pad, ret;
+	int ret;
+
+	if (timings->pad)
+		return -EINVAL;
 
-	pad = timings->pad;
 	timings->pad = vin->sink_pad_idx;
 
 	ret = v4l2_subdev_call(sd, pad, enum_dv_timings, timings);
 
-	timings->pad = pad;
+	timings->pad = 0;
 
 	return ret;
 }
@@ -600,14 +602,16 @@ static int rvin_dv_timings_cap(struct file *file, void *priv_fh,
 {
 	struct rvin_dev *vin = video_drvdata(file);
 	struct v4l2_subdev *sd = vin_to_source(vin);
-	int pad, ret;
+	int ret;
+
+	if (cap->pad)
+		return -EINVAL;
 
-	pad = cap->pad;
 	cap->pad = vin->sink_pad_idx;
 
 	ret = v4l2_subdev_call(sd, pad, dv_timings_cap, cap);
 
-	cap->pad = pad;
+	cap->pad = 0;
 
 	return ret;
 }
@@ -616,17 +620,16 @@ static int rvin_g_edid(struct file *file, void *fh, struct v4l2_edid *edid)
 {
 	struct rvin_dev *vin = video_drvdata(file);
 	struct v4l2_subdev *sd = vin_to_source(vin);
-	int input, ret;
+	int ret;
 
 	if (edid->pad)
 		return -EINVAL;
 
-	input = edid->pad;
 	edid->pad = vin->sink_pad_idx;
 
 	ret = v4l2_subdev_call(sd, pad, get_edid, edid);
 
-	edid->pad = input;
+	edid->pad = 0;
 
 	return ret;
 }
@@ -635,17 +638,16 @@ static int rvin_s_edid(struct file *file, void *fh, struct v4l2_edid *edid)
 {
 	struct rvin_dev *vin = video_drvdata(file);
 	struct v4l2_subdev *sd = vin_to_source(vin);
-	int input, ret;
+	int ret;
 
 	if (edid->pad)
 		return -EINVAL;
 
-	input = edid->pad;
 	edid->pad = vin->sink_pad_idx;
 
 	ret = v4l2_subdev_call(sd, pad, set_edid, edid);
 
-	edid->pad = input;
+	edid->pad = 0;
 
 	return ret;
 }
-- 
2.13.0

  parent reply	other threads:[~2017-05-24  0:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-24  0:15 [PATCH v2 00/17] rcar-vin: fix issues with format and capturing Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 01/17] rcar-vin: reset bytesperline and sizeimage when resetting format Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 02/17] rcar-vin: use rvin_reset_format() in S_DV_TIMINGS Niklas Söderlund
2017-05-24  0:15 ` Niklas Söderlund [this message]
2017-05-24  0:15 ` [PATCH v2 04/17] rcar-vin: fix standard in input enumeration Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 05/17] rcar-vin: move subdev source and sink pad index to rvin_graph_entity Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 06/17] rcar-vin: refactor pad lookup code Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 07/17] rcar-vin: move pad lookup to async bound handler Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 08/17] rcar-vin: use pad information when verifying media bus format Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 09/17] rcar-vin: decrease buffers needed to capture Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 10/17] rcar-vin: move functions which acts on hardware Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 11/17] rcar-vin: select capture mode based on free buffers Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 12/17] rcar-vin: allow switch between capturing modes when stalling Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 13/17] rcar-vin: refactor and fold in function after stall handling rework Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 14/17] rcar-vin: remove subdevice matching from bind and unbind callbacks Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 15/17] rcar-vin: register the video device at probe time Niklas Söderlund
2017-05-29  6:52   ` Hans Verkuil
2017-05-29  6:56     ` Hans Verkuil
2017-05-29  7:49       ` Niklas Söderlund
2017-05-29  7:55         ` Hans Verkuil
2017-05-29  8:13           ` Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 16/17] rcar-vin: add missing error check to propagate error Niklas Söderlund
2017-05-24  0:15 ` [PATCH v2 17/17] rcar-vin: fix bug in pixelformat selection Niklas Söderlund
2017-05-24  9:01   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170524001540.13613-4-niklas.soderlund@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=hverkuil@xs4all.nl \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomoharu.fukawa.eb@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).