From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from kirsty.vergenet.net ([202.4.237.240]:46055 "EHLO kirsty.vergenet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030668AbdEZGtL (ORCPT ); Fri, 26 May 2017 02:49:11 -0400 Date: Fri, 26 May 2017 08:49:07 +0200 From: Simon Horman To: Ulrich Hecht Cc: linux-renesas-soc@vger.kernel.org, laurent.pinchart@ideasonboard.com, linux-media@vger.kernel.org, geert@linux-m68k.org, magnus.damm@gmail.com, hans.verkuil@cisco.com, niklas.soderlund@ragnatech.se, sergei.shtylyov@cogentembedded.com, devicetree@vger.kernel.org Subject: Re: [PATCH v3 0/4] r8a7793 Gose video input support Message-ID: <20170526064907.GD2628@verge.net.au> References: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> Sender: linux-media-owner@vger.kernel.org List-ID: On Fri, May 19, 2017 at 03:07:00PM +0200, Ulrich Hecht wrote: > Hi! > > This is a by-the-datasheet implementation of analog and digital video input > on the Gose board. > > This revision adds new bindings that distinguish between ADV7180 variants > with three and six input ports. There are numerous variants of this chip, > but since all that have "CP" in their names have three inputs, and all that > have "ST" have six, I have limited myself to two new compatible strings, > "adv7180cp" and "adv7180st". > > The digital input patch has received minor tweaks of the port names for > consistency, and the Gose analog input patch has been modified to use the > new bindings, and a composite video connector has been added. > > CU > Uli > > > Changes since v2: > - hdmi: port hdmi_con renamed to hdmi_con_out > - adv7180: added new compatibility strings and bindings > - composite: added connector, use new bindings > > Changes since v1: > - r8a7793.dtsi: added VIN2 > - modeled HDMI decoder input/output and connector > - added "renesas,rcar-gen2-vin" compat strings > - removed unnecessary "remote" node and aliases > - set ADV7612 interrupt to GP4_2 > > > Ulrich Hecht (4): > ARM: dts: gose: add HDMI input I have queued-up the above patch for v4.13. > media: adv7180: add adv7180cp, adv7180st compatible strings > media: adv7180: Add adv7180cp, adv7180st bindings > ARM: dts: gose: add composite video input I have marked the above dts patch as "deferred" pending acceptance of the binding. Please repost or otherwise ping me once that has happened. > .../devicetree/bindings/media/i2c/adv7180.txt | 15 +++ > arch/arm/boot/dts/r8a7793-gose.dts | 127 ++++++++++++++++++++- > drivers/media/i2c/adv7180.c | 2 + > 3 files changed, 142 insertions(+), 2 deletions(-) > > -- > 2.7.4 >