From: Daniel Scheller <d.scheller.oss@gmail.com>
To: linux-media@vger.kernel.org, mchehab@kernel.org,
mchehab@s-opensource.com
Cc: rascobie@slingshot.co.nz
Subject: [PATCH v2 4/5] media: dvb-frontends/stv0910: report S2 rolloff in get_frontend()
Date: Mon, 22 Jan 2018 18:13:45 +0100 [thread overview]
Message-ID: <20180122171346.822-5-d.scheller.oss@gmail.com> (raw)
In-Reply-To: <20180122171346.822-1-d.scheller.oss@gmail.com>
From: Daniel Scheller <d.scheller@gmx.net>
Report the currently used S2 rolloff factor in get_frontend(). For
cosmetic reasons, also change all feroll_off occurences to fe_rolloff.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
---
drivers/media/dvb-frontends/stv0910.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/media/dvb-frontends/stv0910.c b/drivers/media/dvb-frontends/stv0910.c
index de132a85e537..7ab014cec56c 100644
--- a/drivers/media/dvb-frontends/stv0910.c
+++ b/drivers/media/dvb-frontends/stv0910.c
@@ -113,7 +113,7 @@ struct stv {
enum fe_stv0910_mod_cod mod_cod;
enum dvbs2_fectype fectype;
u32 pilots;
- enum fe_stv0910_roll_off feroll_off;
+ enum fe_stv0910_roll_off fe_rolloff;
int is_standard_broadcast;
int is_vcm;
@@ -541,7 +541,7 @@ static int get_signal_parameters(struct stv *state)
}
state->is_vcm = 0;
state->is_standard_broadcast = 1;
- state->feroll_off = FE_SAT_35;
+ state->fe_rolloff = FE_SAT_35;
}
return 0;
}
@@ -1300,14 +1300,14 @@ static int manage_matype_info(struct stv *state)
read_regs(state, RSTV0910_P2_MATSTR1 + state->regoff,
bbheader, 2);
- state->feroll_off =
+ state->fe_rolloff =
(enum fe_stv0910_roll_off)(bbheader[0] & 0x03);
state->is_vcm = (bbheader[0] & 0x10) == 0;
state->is_standard_broadcast = (bbheader[0] & 0xFC) == 0xF0;
} else if (state->receive_mode == RCVMODE_DVBS) {
state->is_vcm = 0;
state->is_standard_broadcast = 1;
- state->feroll_off = FE_SAT_35;
+ state->fe_rolloff = FE_SAT_35;
}
return 0;
}
@@ -1571,11 +1571,15 @@ static int get_frontend(struct dvb_frontend *fe,
FEC_3_4, FEC_4_5, FEC_5_6, FEC_8_9,
FEC_9_10
};
+ const enum fe_rolloff ro2ro[4] = {
+ ROLLOFF_35, ROLLOFF_25, ROLLOFF_20, ROLLOFF_15,
+ };
read_reg(state, RSTV0910_P2_DMDMODCOD + state->regoff, &tmp);
mc = ((tmp & 0x7c) >> 2);
p->pilot = (tmp & 0x01) ? PILOT_ON : PILOT_OFF;
p->modulation = modcod2mod[mc];
p->fec_inner = modcod2fec[mc];
+ p->rolloff = ro2ro[state->fe_rolloff];
} else if (state->receive_mode == RCVMODE_DVBS) {
read_reg(state, RSTV0910_P2_VITCURPUN + state->regoff, &tmp);
switch (tmp & 0x1F) {
--
2.13.6
next prev parent reply other threads:[~2018-01-22 17:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-22 17:13 [PATCH v2 0/5] Add FEC rates, S2X params and 64K transmission Daniel Scheller
2018-01-22 17:13 ` [PATCH v2 1/5] media: dvb_frontend: add FEC modes, S2X modulations " Daniel Scheller
2018-03-06 13:17 ` Mauro Carvalho Chehab
2018-01-22 17:13 ` [PATCH v2 2/5] media: dvb_frontend: add DVB-S2X rolloff factors Daniel Scheller
2018-01-22 17:13 ` [PATCH v2 3/5] media: dvb-frontends/stv0910: report FEC 1/4 and 1/3 in get_frontend() Daniel Scheller
2018-01-22 17:13 ` Daniel Scheller [this message]
2018-01-22 17:13 ` [PATCH v2 5/5] media: dvb-frontends/stv0910: report active delsys " Daniel Scheller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180122171346.822-5-d.scheller.oss@gmail.com \
--to=d.scheller.oss@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mchehab@s-opensource.com \
--cc=rascobie@slingshot.co.nz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).