From: tskd08@gmail.com
To: linux-media@vger.kernel.org
Cc: mchehab@s-opensource.com, Akihiro Tsukada <tskd08@gmail.com>
Subject: [PATCH v2 1/5] dvb-frontends/dvb-pll: add tda6651 ISDB-T pll_desc
Date: Thu, 29 Mar 2018 02:14:59 +0900 [thread overview]
Message-ID: <20180328171503.30541-2-tskd08@gmail.com> (raw)
In-Reply-To: <20180328171503.30541-1-tskd08@gmail.com>
From: Akihiro Tsukada <tskd08@gmail.com>
This patch adds a PLL "description" of Philips TDA6651 for ISDB-T.
It was extracted from (the former) va1j5jf8007t.c of EarthSoft PT1,
thus the desc might include PT1 specific configs.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
---
Changes since v1:
- use new style of specifying pll_desc of the tuner
drivers/media/dvb-frontends/dvb-pll.c | 24 ++++++++++++++++++++++++
drivers/media/dvb-frontends/dvb-pll.h | 2 ++
2 files changed, 26 insertions(+)
diff --git a/drivers/media/dvb-frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c
index deb27aefb9b..62363786e98 100644
--- a/drivers/media/dvb-frontends/dvb-pll.c
+++ b/drivers/media/dvb-frontends/dvb-pll.c
@@ -550,6 +550,28 @@ static const struct dvb_pll_desc dvb_pll_tua6034_friio = {
}
};
+/* Philips TDA6651 ISDB-T, used in Earthsoft PT1 */
+static const struct dvb_pll_desc dvb_pll_tda665x_earth_pt1 = {
+ .name = "Philips TDA6651 ISDB-T (EarthSoft PT1)",
+ .min = 90000000,
+ .max = 770000000,
+ .iffreq = 57000000,
+ .initdata = (u8[]){ 5, 0x0e, 0x7f, 0xc1, 0x80, 0x80 },
+ .count = 10,
+ .entries = {
+ { 140000000, 142857, 0xc1, 0x81 },
+ { 170000000, 142857, 0xc1, 0xa1 },
+ { 220000000, 142857, 0xc1, 0x62 },
+ { 330000000, 142857, 0xc1, 0xa2 },
+ { 402000000, 142857, 0xc1, 0xe2 },
+ { 450000000, 142857, 0xc1, 0x64 },
+ { 550000000, 142857, 0xc1, 0x84 },
+ { 600000000, 142857, 0xc1, 0xa4 },
+ { 700000000, 142857, 0xc1, 0xc4 },
+ { 770000000, 142857, 0xc1, 0xe4 },
+ }
+};
+
/* ----------------------------------------------------------- */
static const struct dvb_pll_desc *pll_list[] = {
@@ -574,6 +596,7 @@ static const struct dvb_pll_desc *pll_list[] = {
[DVB_PLL_SAMSUNG_TBDU18132] = &dvb_pll_samsung_tbdu18132,
[DVB_PLL_SAMSUNG_TBMU24112] = &dvb_pll_samsung_tbmu24112,
[DVB_PLL_TUA6034_FRIIO] = &dvb_pll_tua6034_friio,
+ [DVB_PLL_TDA665X_EARTH_PT1] = &dvb_pll_tda665x_earth_pt1,
};
/* ----------------------------------------------------------- */
@@ -896,6 +919,7 @@ static const struct i2c_device_id dvb_pll_id[] = {
{DVB_PLL_TDEE4_NAME, DVB_PLL_TDEE4},
{DVB_PLL_THOMSON_DTT7520X_NAME, DVB_PLL_THOMSON_DTT7520X},
{DVB_PLL_TUA6034_FRIIO_NAME, DVB_PLL_TUA6034_FRIIO},
+ {DVB_PLL_TDA665X_EARTH_PT1_NAME, DVB_PLL_TDA665X_EARTH_PT1},
{}
};
diff --git a/drivers/media/dvb-frontends/dvb-pll.h b/drivers/media/dvb-frontends/dvb-pll.h
index c1c27c0d1b1..ddaa5d2efd8 100644
--- a/drivers/media/dvb-frontends/dvb-pll.h
+++ b/drivers/media/dvb-frontends/dvb-pll.h
@@ -30,6 +30,7 @@
#define DVB_PLL_TDEE4 18
#define DVB_PLL_THOMSON_DTT7520X 19
#define DVB_PLL_TUA6034_FRIIO 20
+#define DVB_PLL_TDA665X_EARTH_PT1 21
#define DVB_PLL_THOMSON_DTT7579_NAME "dtt7579"
#define DVB_PLL_THOMSON_DTT759X_NAME "dtt759x"
@@ -51,6 +52,7 @@
#define DVB_PLL_TDEE4_NAME "tdee4"
#define DVB_PLL_THOMSON_DTT7520X_NAME "dtt7520x"
#define DVB_PLL_TUA6034_FRIIO_NAME "tua6034_friio"
+#define DVB_PLL_TDA665X_EARTH_PT1_NAME "tda665x_earthpt1"
struct dvb_pll_config {
struct dvb_frontend *fe;
--
2.16.3
next prev parent reply other threads:[~2018-03-28 17:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 17:14 [PATCH v2 0/5] dvb/pci/pt1: decompose earth-pt1 into sub drivers tskd08
2018-03-28 17:14 ` tskd08 [this message]
2018-03-28 17:15 ` [PATCH v2 2/5] tuners: add new i2c driver for Sharp qm1d1b0004 ISDB-S tuner tskd08
2018-03-28 17:15 ` [PATCH v2 3/5] dvb: earth-pt1: decompose pt1 driver into sub drivers tskd08
2018-03-28 17:15 ` [PATCH v2 4/5] dvb: earth-pt1: add support for suspend/resume tskd08
2018-03-28 17:15 ` [PATCH v2 5/5] dvb: earth-pt1: replace schedule_timeout with usleep_range tskd08
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180328171503.30541-2-tskd08@gmail.com \
--to=tskd08@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@s-opensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).