[PATCH v3 04/12] media: ov5640: Remove redundant defines

[Maxime Ripard <maxime.ripard@bootlin.com>]

The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT
defines represent exactly the same setup, and are at the same value, than
the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and
OV5640_SCLK_ROOT_DIV.

Remove them.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/media/i2c/ov5640.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 45e5ba32b8d1..ce9bfaafb675 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -93,9 +93,6 @@
 #define OV5640_REG_SDE_CTRL5		0x5585
 #define OV5640_REG_AVG_READOUT		0x56a1
 
-#define OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT	1
-#define OV5640_SCLK_ROOT_DIVIDER_DEFAULT	2
-
 enum ov5640_mode_id {
 	OV5640_MODE_QCIF_176_144 = 0,
 	OV5640_MODE_QVGA_320_240,
@@ -1961,8 +1958,8 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor)
 		return ret;
 
 	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
-			     (ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) |
-			     ilog2(OV5640_SCLK_ROOT_DIVIDER_DEFAULT));
+			     (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
+			     ilog2(OV5640_SCLK_ROOT_DIV));
 	if (ret)
 		return ret;
 
-- 
2.17.0