* [PATCH 0/3] dw9807 and imx258 drivers
@ 2018-05-17 10:43 Sakari Ailus
2018-05-17 10:43 ` [PATCH 1/3] media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil Sakari Ailus
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Sakari Ailus @ 2018-05-17 10:43 UTC (permalink / raw)
To: linux-media
Re-submitting with correct SoB lines. The removal of the unused retry
variable has been merged to the dw9807 driver patch.
Alan Chiang (2):
media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil
media: dw9807: Add dw9807 vcm driver
Jason Chen (1):
media: imx258: Add imx258 camera sensor driver
.../bindings/media/i2c/dongwoon,dw9807.txt | 9 +
MAINTAINERS | 14 +
drivers/media/i2c/Kconfig | 21 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/dw9807.c | 329 +++++
drivers/media/i2c/imx258.c | 1320 ++++++++++++++++++++
6 files changed, 1695 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
create mode 100644 drivers/media/i2c/dw9807.c
create mode 100644 drivers/media/i2c/imx258.c
--
2.11.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/3] media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil
2018-05-17 10:43 [PATCH 0/3] dw9807 and imx258 drivers Sakari Ailus
@ 2018-05-17 10:43 ` Sakari Ailus
2018-05-17 10:43 ` [PATCH 2/3] media: dw9807: Add dw9807 vcm driver Sakari Ailus
2018-05-17 10:43 ` [PATCH 3/3] media: imx258: Add imx258 camera sensor driver Sakari Ailus
2 siblings, 0 replies; 4+ messages in thread
From: Sakari Ailus @ 2018-05-17 10:43 UTC (permalink / raw)
To: linux-media
From: Alan Chiang <alanx.chiang@intel.com>
Dongwoon DW9807 is a voice coil lens driver.
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
new file mode 100644
index 000000000000..0a1a860beaff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
@@ -0,0 +1,9 @@
+Dongwoon Anatech DW9807 voice coil lens driver
+
+DW9807 is a 10-bit DAC with current sink capability. It is intended for
+controlling voice coil lenses.
+
+Mandatory properties:
+
+- compatible: "dongwoon,dw9807"
+- reg: I2C slave address
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/3] media: dw9807: Add dw9807 vcm driver
2018-05-17 10:43 [PATCH 0/3] dw9807 and imx258 drivers Sakari Ailus
2018-05-17 10:43 ` [PATCH 1/3] media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil Sakari Ailus
@ 2018-05-17 10:43 ` Sakari Ailus
2018-05-17 10:43 ` [PATCH 3/3] media: imx258: Add imx258 camera sensor driver Sakari Ailus
2 siblings, 0 replies; 4+ messages in thread
From: Sakari Ailus @ 2018-05-17 10:43 UTC (permalink / raw)
To: linux-media
From: Alan Chiang <alanx.chiang@intel.com>
DW9807 is a 10 bit DAC from Dongwoon, designed for linear
control of voice coil motor.
This driver creates a V4L2 subdevice and
provides control to set the desired focus.
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 10 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/dw9807.c | 329 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 347 insertions(+)
create mode 100644 drivers/media/i2c/dw9807.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 519f172c9267..6304b696c698 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4382,6 +4382,13 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/dw9714.c
+DONGWOON DW9807 LENS VOICE COIL DRIVER
+M: Sakari Ailus <sakari.ailus@linux.intel.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/dw9807.c
+
DOUBLETALK DRIVER
M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
L: blinux-list@redhat.com
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index b95b44702ccb..e6a721c5e3b0 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -336,6 +336,16 @@ config VIDEO_DW9714
capability. This is designed for linear control of
voice coil motors, controlled via I2C serial interface.
+config VIDEO_DW9807
+ tristate "DW9807 lens voice coil support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a driver for the DW9807 camera lens voice coil.
+ DW9807 is a 10 bit DAC with 100mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index ff6e2914abda..5cf15edacb2b 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o
obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
obj-$(CONFIG_VIDEO_DW9714) += dw9714.o
+obj-$(CONFIG_VIDEO_DW9807) += dw9807.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
diff --git a/drivers/media/i2c/dw9807.c b/drivers/media/i2c/dw9807.c
new file mode 100644
index 000000000000..6ebb98717fb1
--- /dev/null
+++ b/drivers/media/i2c/dw9807.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Intel Corporation
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+#define DW9807_MAX_FOCUS_POS 1023
+/*
+ * This sets the minimum granularity for the focus positions.
+ * A value of 1 gives maximum accuracy for a desired focus position.
+ */
+#define DW9807_FOCUS_STEPS 1
+/*
+ * This acts as the minimum granularity of lens movement.
+ * Keep this value power of 2, so the control steps can be
+ * uniformly adjusted for gradual lens movement, with desired
+ * number of control steps.
+ */
+#define DW9807_CTRL_STEPS 16
+#define DW9807_CTRL_DELAY_US 1000
+
+#define DW9807_CTL_ADDR 0x02
+/*
+ * DW9807 separates two registers to control the VCM position.
+ * One for MSB value, another is LSB value.
+ */
+#define DW9807_MSB_ADDR 0x03
+#define DW9807_LSB_ADDR 0x04
+#define DW9807_STATUS_ADDR 0x05
+#define DW9807_MODE_ADDR 0x06
+#define DW9807_RESONANCE_ADDR 0x07
+
+#define MAX_RETRY 10
+
+struct dw9807_device {
+ struct v4l2_ctrl_handler ctrls_vcm;
+ struct v4l2_subdev sd;
+ u16 current_val;
+};
+
+static inline struct dw9807_device *sd_to_dw9807_vcm(
+ struct v4l2_subdev *subdev)
+{
+ return container_of(subdev, struct dw9807_device, sd);
+}
+
+static int dw9807_i2c_check(struct i2c_client *client)
+{
+ const char status_addr = DW9807_STATUS_ADDR;
+ char status_result;
+ int ret;
+
+ ret = i2c_master_send(client, &status_addr, sizeof(status_addr));
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C write STATUS address fail ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = i2c_master_recv(client, &status_result, sizeof(status_result));
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read STATUS value fail ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ return status_result;
+}
+
+static int dw9807_set_dac(struct i2c_client *client, u16 data)
+{
+ const char tx_data[3] = {
+ DW9807_MSB_ADDR, ((data >> 8) & 0x03), (data & 0xff)
+ };
+ int val, ret;
+
+ /*
+ * According to the datasheet, need to check the bus status before we
+ * write VCM position. This ensure that we really write the value
+ * into the register
+ */
+ ret = readx_poll_timeout(dw9807_i2c_check, client, val, val <= 0,
+ DW9807_CTRL_DELAY_US, MAX_RETRY * DW9807_CTRL_DELAY_US);
+
+ if (ret || val < 0) {
+ if (ret) {
+ dev_warn(&client->dev,
+ "Cannot do the write operation because VCM is busy\n");
+ }
+
+ return ret ? -EBUSY : val;
+ }
+
+ /* Write VCM position to registers */
+ ret = i2c_master_send(client, tx_data, sizeof(tx_data));
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "I2C write MSB fail ret=%d\n", ret);
+
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dw9807_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct dw9807_device *dev_vcm = container_of(ctrl->handler,
+ struct dw9807_device, ctrls_vcm);
+
+ if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) {
+ struct i2c_client *client = v4l2_get_subdevdata(&dev_vcm->sd);
+
+ dev_vcm->current_val = ctrl->val;
+ return dw9807_set_dac(client, ctrl->val);
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops dw9807_vcm_ctrl_ops = {
+ .s_ctrl = dw9807_set_ctrl,
+};
+
+static int dw9807_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ int rval;
+
+ rval = pm_runtime_get_sync(sd->dev);
+ if (rval < 0) {
+ pm_runtime_put_noidle(sd->dev);
+ return rval;
+ }
+
+ return 0;
+}
+
+static int dw9807_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ pm_runtime_put(sd->dev);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops dw9807_int_ops = {
+ .open = dw9807_open,
+ .close = dw9807_close,
+};
+
+static const struct v4l2_subdev_ops dw9807_ops = { };
+
+static void dw9807_subdev_cleanup(struct dw9807_device *dw9807_dev)
+{
+ v4l2_async_unregister_subdev(&dw9807_dev->sd);
+ v4l2_ctrl_handler_free(&dw9807_dev->ctrls_vcm);
+ media_entity_cleanup(&dw9807_dev->sd.entity);
+}
+
+static int dw9807_init_controls(struct dw9807_device *dev_vcm)
+{
+ struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
+ const struct v4l2_ctrl_ops *ops = &dw9807_vcm_ctrl_ops;
+ struct i2c_client *client = v4l2_get_subdevdata(&dev_vcm->sd);
+
+ v4l2_ctrl_handler_init(hdl, 1);
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
+ 0, DW9807_MAX_FOCUS_POS, DW9807_FOCUS_STEPS, 0);
+
+ dev_vcm->sd.ctrl_handler = hdl;
+ if (hdl->error) {
+ dev_err(&client->dev, "%s fail error: 0x%x\n",
+ __func__, hdl->error);
+ return hdl->error;
+ }
+
+ return 0;
+}
+
+static int dw9807_probe(struct i2c_client *client)
+{
+ struct dw9807_device *dw9807_dev;
+ int rval;
+
+ dw9807_dev = devm_kzalloc(&client->dev, sizeof(*dw9807_dev),
+ GFP_KERNEL);
+ if (dw9807_dev == NULL)
+ return -ENOMEM;
+
+ v4l2_i2c_subdev_init(&dw9807_dev->sd, client, &dw9807_ops);
+ dw9807_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ dw9807_dev->sd.internal_ops = &dw9807_int_ops;
+
+ rval = dw9807_init_controls(dw9807_dev);
+ if (rval)
+ goto err_cleanup;
+
+ rval = media_entity_pads_init(&dw9807_dev->sd.entity, 0, NULL);
+ if (rval < 0)
+ goto err_cleanup;
+
+ dw9807_dev->sd.entity.function = MEDIA_ENT_F_LENS;
+
+ rval = v4l2_async_register_subdev(&dw9807_dev->sd);
+ if (rval < 0)
+ goto err_cleanup;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+err_cleanup:
+ dw9807_subdev_cleanup(dw9807_dev);
+
+ return rval;
+}
+
+static int dw9807_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ dw9807_subdev_cleanup(dw9807_dev);
+
+ return 0;
+}
+
+/*
+ * This function sets the vcm position, so it consumes least current
+ * The lens position is gradually moved in units of DW9807_CTRL_STEPS,
+ * to make the movements smoothly.
+ */
+static int __maybe_unused dw9807_vcm_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
+ const char tx_data[2] = { DW9807_CTL_ADDR, 0x01 };
+ int ret, val;
+
+ for (val = dw9807_dev->current_val & ~(DW9807_CTRL_STEPS - 1);
+ val >= 0; val -= DW9807_CTRL_STEPS) {
+ ret = dw9807_set_dac(client, val);
+ if (ret)
+ dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
+ usleep_range(DW9807_CTRL_DELAY_US, DW9807_CTRL_DELAY_US + 10);
+ }
+
+ /* Power down */
+ ret = i2c_master_send(client, tx_data, sizeof(tx_data));
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * This function sets the vcm position to the value set by the user
+ * through v4l2_ctrl_ops s_ctrl handler
+ * The lens position is gradually moved in units of DW9807_CTRL_STEPS,
+ * to make the movements smoothly.
+ */
+static int __maybe_unused dw9807_vcm_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
+ const char tx_data[2] = { DW9807_CTL_ADDR, 0x00 };
+ int ret, val;
+
+ /* Power on */
+ ret = i2c_master_send(client, tx_data, sizeof(tx_data));
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
+ return ret;
+ }
+
+ for (val = dw9807_dev->current_val % DW9807_CTRL_STEPS;
+ val < dw9807_dev->current_val + DW9807_CTRL_STEPS - 1;
+ val += DW9807_CTRL_STEPS) {
+ ret = dw9807_set_dac(client, val);
+ if (ret)
+ dev_err_ratelimited(dev, "%s I2C failure: %d",
+ __func__, ret);
+ usleep_range(DW9807_CTRL_DELAY_US, DW9807_CTRL_DELAY_US + 10);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id dw9807_of_table[] = {
+ { .compatible = "dongwoon,dw9807" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw9807_of_table);
+
+static const struct dev_pm_ops dw9807_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dw9807_vcm_suspend, dw9807_vcm_resume)
+ SET_RUNTIME_PM_OPS(dw9807_vcm_suspend, dw9807_vcm_resume, NULL)
+};
+
+static struct i2c_driver dw9807_i2c_driver = {
+ .driver = {
+ .name = "dw9807",
+ .pm = &dw9807_pm_ops,
+ .of_match_table = dw9807_of_table,
+ },
+ .probe_new = dw9807_probe,
+ .remove = dw9807_remove,
+};
+
+module_i2c_driver(dw9807_i2c_driver);
+
+MODULE_AUTHOR("Chiang, Alan <alanx.chiang@intel.com>");
+MODULE_DESCRIPTION("DW9807 VCM driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/3] media: imx258: Add imx258 camera sensor driver
2018-05-17 10:43 [PATCH 0/3] dw9807 and imx258 drivers Sakari Ailus
2018-05-17 10:43 ` [PATCH 1/3] media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil Sakari Ailus
2018-05-17 10:43 ` [PATCH 2/3] media: dw9807: Add dw9807 vcm driver Sakari Ailus
@ 2018-05-17 10:43 ` Sakari Ailus
2 siblings, 0 replies; 4+ messages in thread
From: Sakari Ailus @ 2018-05-17 10:43 UTC (permalink / raw)
To: linux-media
From: Jason Chen <jasonx.z.chen@intel.com>
Add a V4L2 sub-device driver for the Sony IMX258 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Signed-off-by: Jason Chen <jasonx.z.chen@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx258.c | 1320 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1339 insertions(+)
create mode 100644 drivers/media/i2c/imx258.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 6304b696c698..c82c30059679 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13076,6 +13076,13 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX258 SENSOR DRIVER
+M: Sakari Ailus <sakari.ailus@linux.intel.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx258.c
+
SONY IMX274 SENSOR DRIVER
M: Leon Luo <leonl@leopardimaging.com>
L: linux-media@vger.kernel.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index e6a721c5e3b0..1f9d7c6aa31a 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -585,6 +585,17 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_IMX258
+ tristate "Sony IMX258 sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Sony
+ IMX258 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx258.
+
config VIDEO_IMX274
tristate "Sony IMX274 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 5cf15edacb2b..16fc34eda5cc 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_IMX258) += imx258.o
obj-$(CONFIG_VIDEO_IMX274) += imx274.o
obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
new file mode 100644
index 000000000000..fad3012f4fe5
--- /dev/null
+++ b/drivers/media/i2c/imx258.c
@@ -0,0 +1,1320 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Intel Corporation
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <asm/unaligned.h>
+
+#define IMX258_REG_VALUE_08BIT 1
+#define IMX258_REG_VALUE_16BIT 2
+
+#define IMX258_REG_MODE_SELECT 0x0100
+#define IMX258_MODE_STANDBY 0x00
+#define IMX258_MODE_STREAMING 0x01
+
+/* Chip ID */
+#define IMX258_REG_CHIP_ID 0x0016
+#define IMX258_CHIP_ID 0x0258
+
+/* V_TIMING internal */
+#define IMX258_VTS_30FPS 0x0c98
+#define IMX258_VTS_30FPS_2K 0x0638
+#define IMX258_VTS_30FPS_VGA 0x034c
+#define IMX258_VTS_MAX 0xffff
+
+/*Frame Length Line*/
+#define IMX258_FLL_MIN 0x08a6
+#define IMX258_FLL_MAX 0xffff
+#define IMX258_FLL_STEP 1
+#define IMX258_FLL_DEFAULT 0x0c98
+
+/* HBLANK control - read only */
+#define IMX258_PPL_DEFAULT 5352
+
+/* Exposure control */
+#define IMX258_REG_EXPOSURE 0x0202
+#define IMX258_EXPOSURE_MIN 4
+#define IMX258_EXPOSURE_STEP 1
+#define IMX258_EXPOSURE_DEFAULT 0x640
+#define IMX258_EXPOSURE_MAX 65535
+
+/* Analog gain control */
+#define IMX258_REG_ANALOG_GAIN 0x0204
+#define IMX258_ANA_GAIN_MIN 0
+#define IMX258_ANA_GAIN_MAX 0x1fff
+#define IMX258_ANA_GAIN_STEP 1
+#define IMX258_ANA_GAIN_DEFAULT 0x0
+
+/* Digital gain control */
+#define IMX258_REG_GR_DIGITAL_GAIN 0x020e
+#define IMX258_REG_R_DIGITAL_GAIN 0x0210
+#define IMX258_REG_B_DIGITAL_GAIN 0x0212
+#define IMX258_REG_GB_DIGITAL_GAIN 0x0214
+#define IMX258_DGTL_GAIN_MIN 0
+#define IMX258_DGTL_GAIN_MAX 4096 /* Max = 0xFFF */
+#define IMX258_DGTL_GAIN_DEFAULT 1024
+#define IMX258_DGTL_GAIN_STEP 1
+
+/* Test Pattern Control */
+#define IMX258_REG_TEST_PATTERN 0x0600
+#define IMX258_TEST_PATTERN_DISABLE 0
+#define IMX258_TEST_PATTERN_SOLID_COLOR 1
+#define IMX258_TEST_PATTERN_COLOR_BARS 2
+#define IMX258_TEST_PATTERN_GREY_COLOR 3
+#define IMX258_TEST_PATTERN_PN9 4
+
+/* Orientation */
+#define REG_MIRROR_FLIP_CONTROL 0x0101
+#define REG_CONFIG_MIRROR_FLIP 0x03
+#define REG_CONFIG_FLIP_TEST_PATTERN 0x02
+
+struct imx258_reg {
+ u16 address;
+ u8 val;
+};
+
+struct imx258_reg_list {
+ u32 num_of_regs;
+ const struct imx258_reg *regs;
+};
+
+/* Link frequency config */
+struct imx258_link_freq_config {
+ u32 pixels_per_line;
+
+ /* PLL registers for this link frequency */
+ struct imx258_reg_list reg_list;
+};
+
+/* Mode : resolution and related config&values */
+struct imx258_mode {
+ /* Frame width */
+ u32 width;
+ /* Frame height */
+ u32 height;
+
+ /* V-timing */
+ u32 vts_def;
+ u32 vts_min;
+
+ /* Index of Link frequency config to be used */
+ u32 link_freq_index;
+ /* Default register values */
+ struct imx258_reg_list reg_list;
+};
+
+/* 4208x3118 needs 1267Mbps/lane, 4 lanes */
+static const struct imx258_reg mipi_data_rate_1267mbps[] = {
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x03 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0xC6 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+ { 0x0820, 0x13 },
+ { 0x0821, 0x4C },
+ { 0x0822, 0xCC },
+ { 0x0823, 0xCC },
+};
+
+static const struct imx258_reg mipi_data_rate_640mbps[] = {
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x03 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0x64 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+ { 0x0820, 0x0A },
+ { 0x0821, 0x00 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
+static const struct imx258_reg mode_4208x3118_regs[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
+ { 0x3051, 0x00 },
+ { 0x3052, 0x00 },
+ { 0x4E21, 0x14 },
+ { 0x6B11, 0xCF },
+ { 0x7FF0, 0x08 },
+ { 0x7FF1, 0x0F },
+ { 0x7FF2, 0x08 },
+ { 0x7FF3, 0x1B },
+ { 0x7FF4, 0x23 },
+ { 0x7FF5, 0x60 },
+ { 0x7FF6, 0x00 },
+ { 0x7FF7, 0x01 },
+ { 0x7FF8, 0x00 },
+ { 0x7FF9, 0x78 },
+ { 0x7FFA, 0x00 },
+ { 0x7FFB, 0x00 },
+ { 0x7FFC, 0x00 },
+ { 0x7FFD, 0x00 },
+ { 0x7FFE, 0x00 },
+ { 0x7FFF, 0x03 },
+ { 0x7F76, 0x03 },
+ { 0x7F77, 0xFE },
+ { 0x7FA8, 0x03 },
+ { 0x7FA9, 0xFE },
+ { 0x7B24, 0x81 },
+ { 0x7B25, 0x00 },
+ { 0x6564, 0x07 },
+ { 0x6B0D, 0x41 },
+ { 0x653D, 0x04 },
+ { 0x6B05, 0x8C },
+ { 0x6B06, 0xF9 },
+ { 0x6B08, 0x65 },
+ { 0x6B09, 0xFC },
+ { 0x6B0A, 0xCF },
+ { 0x6B0B, 0xD2 },
+ { 0x6700, 0x0E },
+ { 0x6707, 0x0E },
+ { 0x9104, 0x00 },
+ { 0x4648, 0x7F },
+ { 0x7420, 0x00 },
+ { 0x7421, 0x1C },
+ { 0x7422, 0x00 },
+ { 0x7423, 0xD7 },
+ { 0x5F04, 0x00 },
+ { 0x5F05, 0xED },
+ { 0x0112, 0x0A },
+ { 0x0113, 0x0A },
+ { 0x0114, 0x03 },
+ { 0x0342, 0x14 },
+ { 0x0343, 0xE8 },
+ { 0x0340, 0x0C },
+ { 0x0341, 0x50 },
+ { 0x0344, 0x00 },
+ { 0x0345, 0x00 },
+ { 0x0346, 0x00 },
+ { 0x0347, 0x00 },
+ { 0x0348, 0x10 },
+ { 0x0349, 0x6F },
+ { 0x034A, 0x0C },
+ { 0x034B, 0x2E },
+ { 0x0381, 0x01 },
+ { 0x0383, 0x01 },
+ { 0x0385, 0x01 },
+ { 0x0387, 0x01 },
+ { 0x0900, 0x00 },
+ { 0x0901, 0x11 },
+ { 0x0401, 0x00 },
+ { 0x0404, 0x00 },
+ { 0x0405, 0x10 },
+ { 0x0408, 0x00 },
+ { 0x0409, 0x00 },
+ { 0x040A, 0x00 },
+ { 0x040B, 0x00 },
+ { 0x040C, 0x10 },
+ { 0x040D, 0x70 },
+ { 0x040E, 0x0C },
+ { 0x040F, 0x30 },
+ { 0x3038, 0x00 },
+ { 0x303A, 0x00 },
+ { 0x303B, 0x10 },
+ { 0x300D, 0x00 },
+ { 0x034C, 0x10 },
+ { 0x034D, 0x70 },
+ { 0x034E, 0x0C },
+ { 0x034F, 0x30 },
+ { 0x0350, 0x01 },
+ { 0x0202, 0x0C },
+ { 0x0203, 0x46 },
+ { 0x0204, 0x00 },
+ { 0x0205, 0x00 },
+ { 0x020E, 0x01 },
+ { 0x020F, 0x00 },
+ { 0x0210, 0x01 },
+ { 0x0211, 0x00 },
+ { 0x0212, 0x01 },
+ { 0x0213, 0x00 },
+ { 0x0214, 0x01 },
+ { 0x0215, 0x00 },
+ { 0x7BCD, 0x00 },
+ { 0x94DC, 0x20 },
+ { 0x94DD, 0x20 },
+ { 0x94DE, 0x20 },
+ { 0x95DC, 0x20 },
+ { 0x95DD, 0x20 },
+ { 0x95DE, 0x20 },
+ { 0x7FB0, 0x00 },
+ { 0x9010, 0x3E },
+ { 0x9419, 0x50 },
+ { 0x941B, 0x50 },
+ { 0x9519, 0x50 },
+ { 0x951B, 0x50 },
+ { 0x3030, 0x00 },
+ { 0x3032, 0x00 },
+ { 0x0220, 0x00 },
+};
+
+static const struct imx258_reg mode_2104_1560_regs[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
+ { 0x3051, 0x00 },
+ { 0x3052, 0x00 },
+ { 0x4E21, 0x14 },
+ { 0x6B11, 0xCF },
+ { 0x7FF0, 0x08 },
+ { 0x7FF1, 0x0F },
+ { 0x7FF2, 0x08 },
+ { 0x7FF3, 0x1B },
+ { 0x7FF4, 0x23 },
+ { 0x7FF5, 0x60 },
+ { 0x7FF6, 0x00 },
+ { 0x7FF7, 0x01 },
+ { 0x7FF8, 0x00 },
+ { 0x7FF9, 0x78 },
+ { 0x7FFA, 0x00 },
+ { 0x7FFB, 0x00 },
+ { 0x7FFC, 0x00 },
+ { 0x7FFD, 0x00 },
+ { 0x7FFE, 0x00 },
+ { 0x7FFF, 0x03 },
+ { 0x7F76, 0x03 },
+ { 0x7F77, 0xFE },
+ { 0x7FA8, 0x03 },
+ { 0x7FA9, 0xFE },
+ { 0x7B24, 0x81 },
+ { 0x7B25, 0x00 },
+ { 0x6564, 0x07 },
+ { 0x6B0D, 0x41 },
+ { 0x653D, 0x04 },
+ { 0x6B05, 0x8C },
+ { 0x6B06, 0xF9 },
+ { 0x6B08, 0x65 },
+ { 0x6B09, 0xFC },
+ { 0x6B0A, 0xCF },
+ { 0x6B0B, 0xD2 },
+ { 0x6700, 0x0E },
+ { 0x6707, 0x0E },
+ { 0x9104, 0x00 },
+ { 0x4648, 0x7F },
+ { 0x7420, 0x00 },
+ { 0x7421, 0x1C },
+ { 0x7422, 0x00 },
+ { 0x7423, 0xD7 },
+ { 0x5F04, 0x00 },
+ { 0x5F05, 0xED },
+ { 0x0112, 0x0A },
+ { 0x0113, 0x0A },
+ { 0x0114, 0x03 },
+ { 0x0342, 0x14 },
+ { 0x0343, 0xE8 },
+ { 0x0340, 0x06 },
+ { 0x0341, 0x38 },
+ { 0x0344, 0x00 },
+ { 0x0345, 0x00 },
+ { 0x0346, 0x00 },
+ { 0x0347, 0x00 },
+ { 0x0348, 0x10 },
+ { 0x0349, 0x6F },
+ { 0x034A, 0x0C },
+ { 0x034B, 0x2E },
+ { 0x0381, 0x01 },
+ { 0x0383, 0x01 },
+ { 0x0385, 0x01 },
+ { 0x0387, 0x01 },
+ { 0x0900, 0x01 },
+ { 0x0901, 0x12 },
+ { 0x0401, 0x01 },
+ { 0x0404, 0x00 },
+ { 0x0405, 0x20 },
+ { 0x0408, 0x00 },
+ { 0x0409, 0x02 },
+ { 0x040A, 0x00 },
+ { 0x040B, 0x00 },
+ { 0x040C, 0x10 },
+ { 0x040D, 0x6A },
+ { 0x040E, 0x06 },
+ { 0x040F, 0x18 },
+ { 0x3038, 0x00 },
+ { 0x303A, 0x00 },
+ { 0x303B, 0x10 },
+ { 0x300D, 0x00 },
+ { 0x034C, 0x08 },
+ { 0x034D, 0x38 },
+ { 0x034E, 0x06 },
+ { 0x034F, 0x18 },
+ { 0x0350, 0x01 },
+ { 0x0202, 0x06 },
+ { 0x0203, 0x2E },
+ { 0x0204, 0x00 },
+ { 0x0205, 0x00 },
+ { 0x020E, 0x01 },
+ { 0x020F, 0x00 },
+ { 0x0210, 0x01 },
+ { 0x0211, 0x00 },
+ { 0x0212, 0x01 },
+ { 0x0213, 0x00 },
+ { 0x0214, 0x01 },
+ { 0x0215, 0x00 },
+ { 0x7BCD, 0x01 },
+ { 0x94DC, 0x20 },
+ { 0x94DD, 0x20 },
+ { 0x94DE, 0x20 },
+ { 0x95DC, 0x20 },
+ { 0x95DD, 0x20 },
+ { 0x95DE, 0x20 },
+ { 0x7FB0, 0x00 },
+ { 0x9010, 0x3E },
+ { 0x9419, 0x50 },
+ { 0x941B, 0x50 },
+ { 0x9519, 0x50 },
+ { 0x951B, 0x50 },
+ { 0x3030, 0x00 },
+ { 0x3032, 0x00 },
+ { 0x0220, 0x00 },
+};
+
+static const struct imx258_reg mode_1048_780_regs[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
+ { 0x3051, 0x00 },
+ { 0x3052, 0x00 },
+ { 0x4E21, 0x14 },
+ { 0x6B11, 0xCF },
+ { 0x7FF0, 0x08 },
+ { 0x7FF1, 0x0F },
+ { 0x7FF2, 0x08 },
+ { 0x7FF3, 0x1B },
+ { 0x7FF4, 0x23 },
+ { 0x7FF5, 0x60 },
+ { 0x7FF6, 0x00 },
+ { 0x7FF7, 0x01 },
+ { 0x7FF8, 0x00 },
+ { 0x7FF9, 0x78 },
+ { 0x7FFA, 0x00 },
+ { 0x7FFB, 0x00 },
+ { 0x7FFC, 0x00 },
+ { 0x7FFD, 0x00 },
+ { 0x7FFE, 0x00 },
+ { 0x7FFF, 0x03 },
+ { 0x7F76, 0x03 },
+ { 0x7F77, 0xFE },
+ { 0x7FA8, 0x03 },
+ { 0x7FA9, 0xFE },
+ { 0x7B24, 0x81 },
+ { 0x7B25, 0x00 },
+ { 0x6564, 0x07 },
+ { 0x6B0D, 0x41 },
+ { 0x653D, 0x04 },
+ { 0x6B05, 0x8C },
+ { 0x6B06, 0xF9 },
+ { 0x6B08, 0x65 },
+ { 0x6B09, 0xFC },
+ { 0x6B0A, 0xCF },
+ { 0x6B0B, 0xD2 },
+ { 0x6700, 0x0E },
+ { 0x6707, 0x0E },
+ { 0x9104, 0x00 },
+ { 0x4648, 0x7F },
+ { 0x7420, 0x00 },
+ { 0x7421, 0x1C },
+ { 0x7422, 0x00 },
+ { 0x7423, 0xD7 },
+ { 0x5F04, 0x00 },
+ { 0x5F05, 0xED },
+ { 0x0112, 0x0A },
+ { 0x0113, 0x0A },
+ { 0x0114, 0x03 },
+ { 0x0342, 0x14 },
+ { 0x0343, 0xE8 },
+ { 0x0340, 0x03 },
+ { 0x0341, 0x4C },
+ { 0x0344, 0x00 },
+ { 0x0345, 0x00 },
+ { 0x0346, 0x00 },
+ { 0x0347, 0x00 },
+ { 0x0348, 0x10 },
+ { 0x0349, 0x6F },
+ { 0x034A, 0x0C },
+ { 0x034B, 0x2E },
+ { 0x0381, 0x01 },
+ { 0x0383, 0x01 },
+ { 0x0385, 0x01 },
+ { 0x0387, 0x01 },
+ { 0x0900, 0x01 },
+ { 0x0901, 0x14 },
+ { 0x0401, 0x01 },
+ { 0x0404, 0x00 },
+ { 0x0405, 0x40 },
+ { 0x0408, 0x00 },
+ { 0x0409, 0x06 },
+ { 0x040A, 0x00 },
+ { 0x040B, 0x00 },
+ { 0x040C, 0x10 },
+ { 0x040D, 0x64 },
+ { 0x040E, 0x03 },
+ { 0x040F, 0x0C },
+ { 0x3038, 0x00 },
+ { 0x303A, 0x00 },
+ { 0x303B, 0x10 },
+ { 0x300D, 0x00 },
+ { 0x034C, 0x04 },
+ { 0x034D, 0x18 },
+ { 0x034E, 0x03 },
+ { 0x034F, 0x0C },
+ { 0x0350, 0x01 },
+ { 0x0202, 0x03 },
+ { 0x0203, 0x42 },
+ { 0x0204, 0x00 },
+ { 0x0205, 0x00 },
+ { 0x020E, 0x01 },
+ { 0x020F, 0x00 },
+ { 0x0210, 0x01 },
+ { 0x0211, 0x00 },
+ { 0x0212, 0x01 },
+ { 0x0213, 0x00 },
+ { 0x0214, 0x01 },
+ { 0x0215, 0x00 },
+ { 0x7BCD, 0x00 },
+ { 0x94DC, 0x20 },
+ { 0x94DD, 0x20 },
+ { 0x94DE, 0x20 },
+ { 0x95DC, 0x20 },
+ { 0x95DD, 0x20 },
+ { 0x95DE, 0x20 },
+ { 0x7FB0, 0x00 },
+ { 0x9010, 0x3E },
+ { 0x9419, 0x50 },
+ { 0x941B, 0x50 },
+ { 0x9519, 0x50 },
+ { 0x951B, 0x50 },
+ { 0x3030, 0x00 },
+ { 0x3032, 0x00 },
+ { 0x0220, 0x00 },
+};
+
+static const char * const imx258_test_pattern_menu[] = {
+ "Disabled",
+ "Color Bars",
+ "Solid Color",
+ "Grey Color Bars",
+ "PN9"
+};
+
+static const int imx258_test_pattern_val[] = {
+ IMX258_TEST_PATTERN_DISABLE,
+ IMX258_TEST_PATTERN_COLOR_BARS,
+ IMX258_TEST_PATTERN_SOLID_COLOR,
+ IMX258_TEST_PATTERN_GREY_COLOR,
+ IMX258_TEST_PATTERN_PN9,
+};
+
+/* Configurations for supported link frequencies */
+#define IMX258_LINK_FREQ_634MHZ 633600000ULL
+#define IMX258_LINK_FREQ_320MHZ 320000000ULL
+
+enum {
+ IMX258_LINK_FREQ_1267MBPS,
+ IMX258_LINK_FREQ_640MBPS,
+};
+
+/*
+ * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
+ * data rate => double data rate; number of lanes => 4; bits per pixel => 10
+ */
+static u64 link_freq_to_pixel_rate(u64 f)
+{
+ f *= 2 * 4;
+ do_div(f, 10);
+
+ return f;
+}
+
+/* Menu items for LINK_FREQ V4L2 control */
+static const s64 link_freq_menu_items[] = {
+ IMX258_LINK_FREQ_634MHZ,
+ IMX258_LINK_FREQ_320MHZ,
+};
+
+/* Link frequency configs */
+static const struct imx258_link_freq_config link_freq_configs[] = {
+ [IMX258_LINK_FREQ_1267MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps),
+ .regs = mipi_data_rate_1267mbps,
+ }
+ },
+ [IMX258_LINK_FREQ_640MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps),
+ .regs = mipi_data_rate_640mbps,
+ }
+ },
+};
+
+/* Mode configs */
+static const struct imx258_mode supported_modes[] = {
+ {
+ .width = 4208,
+ .height = 3118,
+ .vts_def = IMX258_VTS_30FPS,
+ .vts_min = IMX258_VTS_30FPS,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_4208x3118_regs),
+ .regs = mode_4208x3118_regs,
+ },
+ .link_freq_index = IMX258_LINK_FREQ_1267MBPS,
+ },
+ {
+ .width = 2104,
+ .height = 1560,
+ .vts_def = IMX258_VTS_30FPS_2K,
+ .vts_min = IMX258_VTS_30FPS_2K,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_2104_1560_regs),
+ .regs = mode_2104_1560_regs,
+ },
+ .link_freq_index = IMX258_LINK_FREQ_640MBPS,
+ },
+ {
+ .width = 1048,
+ .height = 780,
+ .vts_def = IMX258_VTS_30FPS_VGA,
+ .vts_min = IMX258_VTS_30FPS_VGA,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_1048_780_regs),
+ .regs = mode_1048_780_regs,
+ },
+ .link_freq_index = IMX258_LINK_FREQ_640MBPS,
+ },
+};
+
+struct imx258 {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+
+ struct v4l2_ctrl_handler ctrl_handler;
+ /* V4L2 Controls */
+ struct v4l2_ctrl *link_freq;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl *hblank;
+ struct v4l2_ctrl *exposure;
+
+ /* Current mode */
+ const struct imx258_mode *cur_mode;
+
+ /*
+ * Mutex for serialized access:
+ * Protect sensor module set pad format and start/stop streaming safely.
+ */
+ struct mutex mutex;
+
+ /* Streaming on/off */
+ bool streaming;
+};
+
+static inline struct imx258 *to_imx258(struct v4l2_subdev *_sd)
+{
+ return container_of(_sd, struct imx258, sd);
+}
+
+/* Read registers up to 2 at a time */
+static int imx258_read_reg(struct imx258 *imx258, u16 reg, u32 len, u32 *val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ struct i2c_msg msgs[2];
+ u8 addr_buf[2] = { reg >> 8, reg & 0xff };
+ u8 data_buf[4] = { 0, };
+ int ret;
+
+ if (len > 4)
+ return -EINVAL;
+
+ /* Write register address */
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = ARRAY_SIZE(addr_buf);
+ msgs[0].buf = addr_buf;
+
+ /* Read data from register */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = len;
+ msgs[1].buf = &data_buf[4 - len];
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ *val = get_unaligned_be32(data_buf);
+
+ return 0;
+}
+
+/* Write registers up to 2 at a time */
+static int imx258_write_reg(struct imx258 *imx258, u16 reg, u32 len, u32 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ u8 buf[6];
+
+ if (len > 4)
+ return -EINVAL;
+
+ put_unaligned_be16(reg, buf);
+ put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
+ if (i2c_master_send(client, buf, len + 2) != len + 2)
+ return -EIO;
+
+ return 0;
+}
+
+/* Write a list of registers */
+static int imx258_write_regs(struct imx258 *imx258,
+ const struct imx258_reg *regs, u32 len)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < len; i++) {
+ ret = imx258_write_reg(imx258, regs[i].address, 1,
+ regs[i].val);
+ if (ret) {
+ dev_err_ratelimited(
+ &client->dev,
+ "Failed to write reg 0x%4.4x. error = %d\n",
+ regs[i].address, ret);
+
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/* Open sub-device */
+static int imx258_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *try_fmt =
+ v4l2_subdev_get_try_format(sd, fh->pad, 0);
+
+ /* Initialize try_fmt */
+ try_fmt->width = supported_modes[0].width;
+ try_fmt->height = supported_modes[0].height;
+ try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ try_fmt->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+static int imx258_update_digital_gain(struct imx258 *imx258, u32 len, u32 val)
+{
+ int ret;
+
+ ret = imx258_write_reg(imx258, IMX258_REG_GR_DIGITAL_GAIN,
+ IMX258_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx258_write_reg(imx258, IMX258_REG_GB_DIGITAL_GAIN,
+ IMX258_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx258_write_reg(imx258, IMX258_REG_R_DIGITAL_GAIN,
+ IMX258_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx258_write_reg(imx258, IMX258_REG_B_DIGITAL_GAIN,
+ IMX258_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static int imx258_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct imx258 *imx258 =
+ container_of(ctrl->handler, struct imx258, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ int ret = 0;
+
+ /*
+ * Applying V4L2 control value only happens
+ * when power is up for streaming
+ */
+ if (pm_runtime_get_if_in_use(&client->dev) == 0)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ANALOGUE_GAIN:
+ ret = imx258_write_reg(imx258, IMX258_REG_ANALOG_GAIN,
+ IMX258_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_EXPOSURE:
+ ret = imx258_write_reg(imx258, IMX258_REG_EXPOSURE,
+ IMX258_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_DIGITAL_GAIN:
+ ret = imx258_update_digital_gain(imx258, IMX258_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_TEST_PATTERN:
+ ret = imx258_write_reg(imx258, IMX258_REG_TEST_PATTERN,
+ IMX258_REG_VALUE_16BIT,
+ imx258_test_pattern_val[ctrl->val]);
+
+ ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
+ IMX258_REG_VALUE_08BIT,
+ ctrl->val == imx258_test_pattern_val
+ [IMX258_TEST_PATTERN_DISABLE] ?
+ REG_CONFIG_MIRROR_FLIP :
+ REG_CONFIG_FLIP_TEST_PATTERN);
+ break;
+ default:
+ dev_info(&client->dev,
+ "ctrl(id:0x%x,val:0x%x) is not handled\n",
+ ctrl->id, ctrl->val);
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops imx258_ctrl_ops = {
+ .s_ctrl = imx258_set_ctrl,
+};
+
+static int imx258_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ /* Only one bayer order(GRBG) is supported */
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+ return 0;
+}
+
+static int imx258_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->index >= ARRAY_SIZE(supported_modes))
+ return -EINVAL;
+
+ if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+ return -EINVAL;
+
+ fse->min_width = supported_modes[fse->index].width;
+ fse->max_width = fse->min_width;
+ fse->min_height = supported_modes[fse->index].height;
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static void imx258_update_pad_format(const struct imx258_mode *mode,
+ struct v4l2_subdev_format *fmt)
+{
+ fmt->format.width = mode->width;
+ fmt->format.height = mode->height;
+ fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ fmt->format.field = V4L2_FIELD_NONE;
+}
+
+static int __imx258_get_pad_format(struct imx258 *imx258,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ fmt->format = *v4l2_subdev_get_try_format(&imx258->sd, cfg,
+ fmt->pad);
+ else
+ imx258_update_pad_format(imx258->cur_mode, fmt);
+
+ return 0;
+}
+
+static int imx258_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct imx258 *imx258 = to_imx258(sd);
+ int ret;
+
+ mutex_lock(&imx258->mutex);
+ ret = __imx258_get_pad_format(imx258, cfg, fmt);
+ mutex_unlock(&imx258->mutex);
+
+ return ret;
+}
+
+static int imx258_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct imx258 *imx258 = to_imx258(sd);
+ const struct imx258_mode *mode;
+ struct v4l2_mbus_framefmt *framefmt;
+ s32 vblank_def;
+ s32 vblank_min;
+ s64 h_blank;
+ s64 pixel_rate;
+ s64 link_freq;
+
+ mutex_lock(&imx258->mutex);
+
+ /* Only one raw bayer(GBRG) order is supported */
+ fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+ mode = v4l2_find_nearest_size(supported_modes,
+ ARRAY_SIZE(supported_modes), width, height,
+ fmt->format.width, fmt->format.height);
+ imx258_update_pad_format(mode, fmt);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+ *framefmt = fmt->format;
+ } else {
+ imx258->cur_mode = mode;
+ __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index);
+
+ link_freq = link_freq_menu_items[mode->link_freq_index];
+ pixel_rate = link_freq_to_pixel_rate(link_freq);
+ __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate);
+ /* Update limits and set FPS to default */
+ vblank_def = imx258->cur_mode->vts_def -
+ imx258->cur_mode->height;
+ vblank_min = imx258->cur_mode->vts_min -
+ imx258->cur_mode->height;
+ __v4l2_ctrl_modify_range(
+ imx258->vblank, vblank_min,
+ IMX258_VTS_MAX - imx258->cur_mode->height, 1,
+ vblank_def);
+ __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def);
+ h_blank =
+ link_freq_configs[mode->link_freq_index].pixels_per_line
+ - imx258->cur_mode->width;
+ __v4l2_ctrl_modify_range(imx258->hblank, h_blank,
+ h_blank, 1, h_blank);
+ }
+
+ mutex_unlock(&imx258->mutex);
+
+ return 0;
+}
+
+/* Start streaming */
+static int imx258_start_streaming(struct imx258 *imx258)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ const struct imx258_reg_list *reg_list;
+ int ret, link_freq_index;
+
+ /* Setup PLL */
+ link_freq_index = imx258->cur_mode->link_freq_index;
+ reg_list = &link_freq_configs[link_freq_index].reg_list;
+ ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set plls\n", __func__);
+ return ret;
+ }
+
+ /* Apply default values of current mode */
+ reg_list = &imx258->cur_mode->reg_list;
+ ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set mode\n", __func__);
+ return ret;
+ }
+
+ /* Set Orientation be 180 degree */
+ ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
+ IMX258_REG_VALUE_08BIT, REG_CONFIG_MIRROR_FLIP);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set orientation\n",
+ __func__);
+ return ret;
+ }
+
+ /* Apply customized values from user */
+ ret = __v4l2_ctrl_handler_setup(imx258->sd.ctrl_handler);
+ if (ret)
+ return ret;
+
+ /* set stream on register */
+ return imx258_write_reg(imx258, IMX258_REG_MODE_SELECT,
+ IMX258_REG_VALUE_08BIT,
+ IMX258_MODE_STREAMING);
+}
+
+/* Stop streaming */
+static int imx258_stop_streaming(struct imx258 *imx258)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ int ret;
+
+ /* set stream off register */
+ ret = imx258_write_reg(imx258, IMX258_REG_MODE_SELECT,
+ IMX258_REG_VALUE_08BIT, IMX258_MODE_STANDBY);
+ if (ret)
+ dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+ /*
+ * Return success even if it was an error, as there is nothing the
+ * caller can do about it.
+ */
+ return 0;
+}
+
+static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct imx258 *imx258 = to_imx258(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ mutex_lock(&imx258->mutex);
+ if (imx258->streaming == enable) {
+ mutex_unlock(&imx258->mutex);
+ return 0;
+ }
+
+ if (enable) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ goto err_unlock;
+ }
+
+ /*
+ * Apply default & customized values
+ * and then start streaming.
+ */
+ ret = imx258_start_streaming(imx258);
+ if (ret)
+ goto err_rpm_put;
+ } else {
+ imx258_stop_streaming(imx258);
+ pm_runtime_put(&client->dev);
+ }
+
+ imx258->streaming = enable;
+ mutex_unlock(&imx258->mutex);
+
+ return ret;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+err_unlock:
+ mutex_unlock(&imx258->mutex);
+
+ return ret;
+}
+
+static int __maybe_unused imx258_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx258 *imx258 = to_imx258(sd);
+
+ if (imx258->streaming)
+ imx258_stop_streaming(imx258);
+
+ return 0;
+}
+
+static int __maybe_unused imx258_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx258 *imx258 = to_imx258(sd);
+ int ret;
+
+ if (imx258->streaming) {
+ ret = imx258_start_streaming(imx258);
+ if (ret)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ imx258_stop_streaming(imx258);
+ imx258->streaming = 0;
+ return ret;
+}
+
+/* Verify chip ID */
+static int imx258_identify_module(struct imx258 *imx258)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ int ret;
+ u32 val;
+
+ ret = imx258_read_reg(imx258, IMX258_REG_CHIP_ID,
+ IMX258_REG_VALUE_16BIT, &val);
+ if (ret) {
+ dev_err(&client->dev, "failed to read chip id %x\n",
+ IMX258_CHIP_ID);
+ return ret;
+ }
+
+ if (val != IMX258_CHIP_ID) {
+ dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
+ IMX258_CHIP_ID, val);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx258_video_ops = {
+ .s_stream = imx258_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx258_pad_ops = {
+ .enum_mbus_code = imx258_enum_mbus_code,
+ .get_fmt = imx258_get_pad_format,
+ .set_fmt = imx258_set_pad_format,
+ .enum_frame_size = imx258_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops imx258_subdev_ops = {
+ .video = &imx258_video_ops,
+ .pad = &imx258_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops imx258_internal_ops = {
+ .open = imx258_open,
+};
+
+/* Initialize control handlers */
+static int imx258_init_controls(struct imx258 *imx258)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ struct v4l2_ctrl_handler *ctrl_hdlr;
+ s64 exposure_max;
+ s64 vblank_def;
+ s64 vblank_min;
+ s64 pixel_rate_min;
+ s64 pixel_rate_max;
+ int ret;
+
+ ctrl_hdlr = &imx258->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ if (ret)
+ return ret;
+
+ mutex_init(&imx258->mutex);
+ ctrl_hdlr->lock = &imx258->mutex;
+ imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
+ &imx258_ctrl_ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(link_freq_menu_items) - 1,
+ 0,
+ link_freq_menu_items);
+
+ if (imx258->link_freq)
+ imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
+ pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]);
+ /* By default, PIXEL_RATE is read only */
+ imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
+ V4L2_CID_PIXEL_RATE,
+ pixel_rate_min, pixel_rate_max,
+ 1, pixel_rate_max);
+
+
+ vblank_def = imx258->cur_mode->vts_def - imx258->cur_mode->height;
+ vblank_min = imx258->cur_mode->vts_min - imx258->cur_mode->height;
+ imx258->vblank = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_VBLANK,
+ vblank_min,
+ IMX258_VTS_MAX - imx258->cur_mode->height, 1,
+ vblank_def);
+
+ if (imx258->vblank)
+ imx258->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ imx258->hblank = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_HBLANK,
+ IMX258_PPL_DEFAULT - imx258->cur_mode->width,
+ IMX258_PPL_DEFAULT - imx258->cur_mode->width,
+ 1,
+ IMX258_PPL_DEFAULT - imx258->cur_mode->width);
+
+ if (imx258->hblank)
+ imx258->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ exposure_max = imx258->cur_mode->vts_def - 8;
+ imx258->exposure = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx258_ctrl_ops,
+ V4L2_CID_EXPOSURE, IMX258_EXPOSURE_MIN,
+ IMX258_EXPOSURE_MAX, IMX258_EXPOSURE_STEP,
+ IMX258_EXPOSURE_DEFAULT);
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+ IMX258_ANA_GAIN_MIN, IMX258_ANA_GAIN_MAX,
+ IMX258_ANA_GAIN_STEP, IMX258_ANA_GAIN_DEFAULT);
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+ IMX258_DGTL_GAIN_MIN, IMX258_DGTL_GAIN_MAX,
+ IMX258_DGTL_GAIN_STEP,
+ IMX258_DGTL_GAIN_DEFAULT);
+
+ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx258_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(imx258_test_pattern_menu) - 1,
+ 0, 0, imx258_test_pattern_menu);
+
+ if (ctrl_hdlr->error) {
+ ret = ctrl_hdlr->error;
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto error;
+ }
+
+ imx258->sd.ctrl_handler = ctrl_hdlr;
+
+ return 0;
+
+error:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ mutex_destroy(&imx258->mutex);
+
+ return ret;
+}
+
+static void imx258_free_controls(struct imx258 *imx258)
+{
+ v4l2_ctrl_handler_free(imx258->sd.ctrl_handler);
+ mutex_destroy(&imx258->mutex);
+}
+
+static int imx258_probe(struct i2c_client *client)
+{
+ struct imx258 *imx258;
+ int ret;
+ u32 val = 0;
+
+ device_property_read_u32(&client->dev, "clock-frequency", &val);
+ if (val != 19200000)
+ return -EINVAL;
+
+ imx258 = devm_kzalloc(&client->dev, sizeof(*imx258), GFP_KERNEL);
+ if (!imx258)
+ return -ENOMEM;
+
+ /* Initialize subdev */
+ v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
+
+ /* Check module identity */
+ ret = imx258_identify_module(imx258);
+ if (ret)
+ return ret;
+
+ /* Set default mode to max resolution */
+ imx258->cur_mode = &supported_modes[0];
+
+ ret = imx258_init_controls(imx258);
+ if (ret)
+ return ret;
+
+ /* Initialize subdev */
+ imx258->sd.internal_ops = &imx258_internal_ops;
+ imx258->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ imx258->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ /* Initialize source pad */
+ imx258->pad.flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&imx258->sd.entity, 1, &imx258->pad);
+ if (ret)
+ goto error_handler_free;
+
+ ret = v4l2_async_register_subdev_sensor_common(&imx258->sd);
+ if (ret < 0)
+ goto error_media_entity;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+error_media_entity:
+ media_entity_cleanup(&imx258->sd.entity);
+
+error_handler_free:
+ imx258_free_controls(imx258);
+
+ return ret;
+}
+
+static int imx258_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx258 *imx258 = to_imx258(sd);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ imx258_free_controls(imx258);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx258_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx258_suspend, imx258_resume)
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id imx258_acpi_ids[] = {
+ { "SONY258A" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(acpi, imx258_acpi_ids);
+#endif
+
+static struct i2c_driver imx258_i2c_driver = {
+ .driver = {
+ .name = "imx258",
+ .pm = &imx258_pm_ops,
+ .acpi_match_table = ACPI_PTR(imx258_acpi_ids),
+ },
+ .probe_new = imx258_probe,
+ .remove = imx258_remove,
+};
+
+module_i2c_driver(imx258_i2c_driver);
+
+MODULE_AUTHOR("Yeh, Andy <andy.yeh@intel.com>");
+MODULE_AUTHOR("Chiang, Alan <alanx.chiang@intel.com>");
+MODULE_AUTHOR("Chen, Jason <jasonx.z.chen@intel.com>");
+MODULE_DESCRIPTION("Sony IMX258 sensor driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-17 10:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-05-17 10:43 [PATCH 0/3] dw9807 and imx258 drivers Sakari Ailus
2018-05-17 10:43 ` [PATCH 1/3] media: dt-bindings: Add bindings for Dongwoon DW9807 voice coil Sakari Ailus
2018-05-17 10:43 ` [PATCH 2/3] media: dw9807: Add dw9807 vcm driver Sakari Ailus
2018-05-17 10:43 ` [PATCH 3/3] media: imx258: Add imx258 camera sensor driver Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).