Re: [PATCH v2 0/2] media: i2c: ov5640: Re-work MIPI startup sequence

[jacopo mondi <jacopo@jmondi.org>]

[-- Attachment #1: Type: text/plain, Size: 3105 bytes --]

Hi Steve,

On Tue, Jul 10, 2018 at 02:10:54PM -0700, Steve Longerbeam wrote:
> Hi Jacopo,
>
> Sorry to report my testing on SabreSD has same result
> as last time. This series fixes the LP-11 timeout at stream
> on but captured images are still blank. I tried the 640x480
> mode with UYVY2X8. Here is the pad config:

This saddens me :(

I'm capturing with the same format and sizes... this shouldn't be the
issue

Could you confirm this matches what you have in your tree?
5dc2c80 media: ov5640: Fix timings setup code
b35e757 media: i2c: ov5640: Re-work MIPI startup sequence
3c4a737 media: ov5640: fix frame interval enumeration
41cb1c7 media: ov5640: adjust xclk_max
c3f3ba3 media: ov5640: add support of module orientation
ce85705 media: ov5640: add HFLIP/VFLIP controls support
8663341 media: ov5640: Program the visible resolution
476dec0 media: ov5640: Add horizontal and vertical totals
dba13a0 media: ov5640: Change horizontal and vertical resolutions name
8f57c2f media: ov5640: Init properly the SCLK dividers

Thanks
   j

>
> # media-ctl --get-v4l2 "'ov5640 1-003c':0"
>         [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
> ycbcr:601 quantization:full-range]
>
> Steve
>
> On 07/10/2018 11:36 AM, Jacopo Mondi wrote:
> >Hello,
> >    this series fixes capture operations on i.MX6Q platforms (and possible other
> >platforms reported not working) using MIPI CSI-2 interface.
> >
> >This iteration expands the v1 version with an additional fix, initially
> >submitted by Maxime in his series:
> >[PATCH v3 00/12] media: ov5640: Misc cleanup and improvements
> >https://www.spinics.net/lists/linux-media/msg134436.html
> >
> >The original patch has been reported not fully fixing the issues by Daniel Mack
> >in his comment here below (on a Qualcomm platform if I'm not wrong):
> >https://www.spinics.net/lists/linux-media/msg134524.html
> >On my i.MX6Q testing platform that patch alone does not fix MIPI capture
> >neither.
> >
> >The version I'm sending here re-introduces some of the timings parameters in the
> >initial configuration blob (not in the single mode ones), which apparently has
> >to be at least initially programmed to allow the driver to later program them
> >singularly in the 'set_timings()' function. Unfortunately I do not have a real
> >rationale behind this which explains why it has to be done this way :(
> >
> >For the MIPI startup sequence re-work patch, no changes compared to v1.
> >Steve reported he has verified the LP-11 timout issue is solved on his testing
> >platform too. For more details, please refer to the v1 cover letter:
> >https://www.mail-archive.com/linux-media@vger.kernel.org/msg133352.html
> >
> >Thanks
> >    j
> >
> >Jacopo Mondi (1):
> >   media: i2c: ov5640: Re-work MIPI startup sequence
> >
> >Samuel Bobrowicz (1):
> >   media: ov5640: Fix timings setup code
> >
> >  drivers/media/i2c/ov5640.c | 107 ++++++++++++++++++++++++++++++++++-----------
> >  1 file changed, 82 insertions(+), 25 deletions(-)
> >
> >--
> >2.7.4
> >
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]