From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Subject: [PATCH 1/1] v4l: i2c: Replace "sensor-level" by "sensor"
Date: Mon, 16 Jul 2018 18:22:17 +0300 [thread overview]
Message-ID: <20180716152217.17089-1-sakari.ailus@linux.intel.com> (raw)
A lot of sensor drivers are labelled as "sensor-level" drivers. That's odd
and somewhat confusing as the term isn't used elsewhere: these are just
sensor drivers. Call them such.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/Kconfig | 62 +++++++++++++++++++++++------------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 8669853e13614..5ee7a09001a7d 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -398,7 +398,7 @@ config VIDEO_TVP514X
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
+ This is a Video4Linux2 sensor driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
@@ -600,7 +600,7 @@ config VIDEO_IMX258
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the Sony
+ This is a Video4Linux2 sensor driver for the Sony
IMX258 camera.
To compile this driver as a module, choose M here: the
@@ -611,7 +611,7 @@ config VIDEO_IMX274
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a V4L2 sensor-level driver for the Sony IMX274
+ This is a V4L2 sensor driver for the Sony IMX274
CMOS image sensor.
config VIDEO_OV2640
@@ -619,7 +619,7 @@ config VIDEO_OV2640
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
help
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV2640 camera.
To compile this driver as a module, choose M here: the
@@ -631,7 +631,7 @@ config VIDEO_OV2659
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV2659 camera.
To compile this driver as a module, choose M here: the
@@ -643,7 +643,7 @@ config VIDEO_OV2685
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV2685 camera.
To compile this driver as a module, choose M here: the
@@ -656,7 +656,7 @@ config VIDEO_OV5640
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the Omnivision
+ This is a Video4Linux2 sensor driver for the Omnivision
OV5640 camera sensor with a MIPI CSI-2 interface.
config VIDEO_OV5645
@@ -666,7 +666,7 @@ config VIDEO_OV5645
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV5645 camera.
To compile this driver as a module, choose M here: the
@@ -678,7 +678,7 @@ config VIDEO_OV5647
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV5647 camera.
To compile this driver as a module, choose M here: the
@@ -689,7 +689,7 @@ config VIDEO_OV6650
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV6650 camera.
To compile this driver as a module, choose M here: the
@@ -702,7 +702,7 @@ config VIDEO_OV5670
depends on MEDIA_CONTROLLER
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV5670 camera.
To compile this driver as a module, choose M here: the
@@ -713,7 +713,7 @@ config VIDEO_OV5695
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV5695 camera.
To compile this driver as a module, choose M here: the
@@ -725,7 +725,7 @@ config VIDEO_OV7251
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
help
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV7251 camera.
To compile this driver as a module, choose M here: the
@@ -736,7 +736,7 @@ config VIDEO_OV772X
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV772x camera.
To compile this driver as a module, choose M here: the
@@ -747,7 +747,7 @@ config VIDEO_OV7640
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV7640 camera.
To compile this driver as a module, choose M here: the
@@ -759,7 +759,7 @@ config VIDEO_OV7670
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
@@ -768,14 +768,14 @@ config VIDEO_OV7740
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
- This is a V4L2 sensor-level driver for the Omnivision
+ This is a V4L2 sensor driver for the Omnivision
OV9650 and OV9652 camera sensors.
config VIDEO_OV13858
@@ -784,7 +784,7 @@ config VIDEO_OV13858
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
+ This is a Video4Linux2 sensor driver for the OmniVision
OV13858 camera.
config VIDEO_VS6624
@@ -792,7 +792,7 @@ config VIDEO_VS6624
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the ST VS6624
+ This is a Video4Linux2 sensor driver for the ST VS6624
camera.
To compile this driver as a module, choose M here: the
@@ -820,7 +820,7 @@ config VIDEO_MT9P031
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_APTINA_PLL
---help---
- This is a Video4Linux2 sensor-level driver for the Aptina
+ This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt9p031 5 Mpixel camera.
config VIDEO_MT9T001
@@ -828,7 +828,7 @@ config VIDEO_MT9T001
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the Aptina
+ This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
config VIDEO_MT9T112
@@ -836,7 +836,7 @@ config VIDEO_MT9T112
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the Aptina
+ This is a Video4Linux2 sensor driver for the Aptina
(Micron) MT9T111 and MT9T112 3 Mpixel camera.
To compile this driver as a module, choose M here: the
@@ -847,7 +847,7 @@ config VIDEO_MT9V011
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
- This is a Video4Linux2 sensor-level driver for the Micron
+ This is a Video4Linux2 sensor driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
em28xx driver.
@@ -858,7 +858,7 @@ config VIDEO_MT9V032
select REGMAP_I2C
select V4L2_FWNODE
---help---
- This is a Video4Linux2 sensor-level driver for the Micron
+ This is a Video4Linux2 sensor driver for the Micron
MT9V032 752x480 CMOS sensor.
config VIDEO_SR030PC30
@@ -882,7 +882,7 @@ config VIDEO_RJ54N1
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
help
- This is a V4L2 sensor-level driver for Sharp RJ54N1CB0C CMOS image
+ This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
sensor.
To compile this driver as a module, choose M here: the
@@ -893,7 +893,7 @@ config VIDEO_S5K6AA
depends on MEDIA_CAMERA_SUPPORT
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
- This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
+ This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
config VIDEO_S5K6A3
@@ -901,7 +901,7 @@ config VIDEO_S5K6A3
depends on MEDIA_CAMERA_SUPPORT
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
- This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
+ This is a V4L2 sensor driver for Samsung S5K6A3 raw
camera sensor.
config VIDEO_S5K4ECGX
@@ -909,7 +909,7 @@ config VIDEO_S5K4ECGX
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select CRC32
---help---
- This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
+ This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
camera sensor with an embedded SoC image signal processor.
config VIDEO_S5K5BAF
@@ -917,7 +917,7 @@ config VIDEO_S5K5BAF
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
---help---
- This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M
+ This is a V4L2 sensor driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
source "drivers/media/i2c/smiapp/Kconfig"
@@ -928,7 +928,7 @@ config VIDEO_S5C73M3
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
---help---
- This is a V4L2 sensor-level driver for Samsung S5C73M3
+ This is a V4L2 sensor driver for Samsung S5C73M3
8 Mpixel camera.
comment "Flash devices"
--
2.11.0
reply other threads:[~2018-07-16 15:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180716152217.17089-1-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).