From: Philipp Zabel <p.zabel@pengutronix.de>
To: linux-media@vger.kernel.org
Cc: Steve Longerbeam <slongerbeam@gmail.com>,
Nicolas Dufresne <nicolas@ndufresne.ca>,
kernel@pengutronix.de
Subject: [PATCH v2 02/16] gpu: ipu-v3: image-convert: prepare for per-tile configuration
Date: Thu, 19 Jul 2018 17:30:28 +0200 [thread overview]
Message-ID: <20180719153042.533-3-p.zabel@pengutronix.de> (raw)
In-Reply-To: <20180719153042.533-1-p.zabel@pengutronix.de>
Let convert_start start from a given tile index, allocate intermediate
tile with maximum tile size.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/gpu/ipu-v3/ipu-image-convert.c | 60 +++++++++++++++-----------
1 file changed, 35 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c
index 524a717ab28e..7eef51decc97 100644
--- a/drivers/gpu/ipu-v3/ipu-image-convert.c
+++ b/drivers/gpu/ipu-v3/ipu-image-convert.c
@@ -605,7 +605,8 @@ static void init_idmac_channel(struct ipu_image_convert_ctx *ctx,
struct ipuv3_channel *channel,
struct ipu_image_convert_image *image,
enum ipu_rotate_mode rot_mode,
- bool rot_swap_width_height)
+ bool rot_swap_width_height,
+ unsigned int tile)
{
struct ipu_image_convert_chan *chan = ctx->chan;
unsigned int burst_size;
@@ -615,23 +616,23 @@ static void init_idmac_channel(struct ipu_image_convert_ctx *ctx,
unsigned int tile_idx[2];
if (image->type == IMAGE_CONVERT_OUT) {
- tile_idx[0] = ctx->out_tile_map[0];
+ tile_idx[0] = ctx->out_tile_map[tile];
tile_idx[1] = ctx->out_tile_map[1];
} else {
- tile_idx[0] = 0;
+ tile_idx[0] = tile;
tile_idx[1] = 1;
}
if (rot_swap_width_height) {
- width = image->tile[0].height;
- height = image->tile[0].width;
- stride = image->tile[0].rot_stride;
+ width = image->tile[tile_idx[0]].height;
+ height = image->tile[tile_idx[0]].width;
+ stride = image->tile[tile_idx[0]].rot_stride;
addr0 = ctx->rot_intermediate[0].phys;
if (ctx->double_buffering)
addr1 = ctx->rot_intermediate[1].phys;
} else {
- width = image->tile[0].width;
- height = image->tile[0].height;
+ width = image->tile[tile_idx[0]].width;
+ height = image->tile[tile_idx[0]].height;
stride = image->stride;
addr0 = image->base.phys0 +
image->tile[tile_idx[0]].offset;
@@ -681,7 +682,7 @@ static void init_idmac_channel(struct ipu_image_convert_ctx *ctx,
ipu_idmac_set_double_buffer(channel, ctx->double_buffering);
}
-static int convert_start(struct ipu_image_convert_run *run)
+static int convert_start(struct ipu_image_convert_run *run, unsigned int tile)
{
struct ipu_image_convert_ctx *ctx = run->ctx;
struct ipu_image_convert_chan *chan = ctx->chan;
@@ -689,28 +690,29 @@ static int convert_start(struct ipu_image_convert_run *run)
struct ipu_image_convert_image *s_image = &ctx->in;
struct ipu_image_convert_image *d_image = &ctx->out;
enum ipu_color_space src_cs, dest_cs;
+ unsigned int dst_tile = ctx->out_tile_map[tile];
unsigned int dest_width, dest_height;
int ret;
- dev_dbg(priv->ipu->dev, "%s: task %u: starting ctx %p run %p\n",
- __func__, chan->ic_task, ctx, run);
+ dev_dbg(priv->ipu->dev, "%s: task %u: starting ctx %p run %p tile %u -> %u\n",
+ __func__, chan->ic_task, ctx, run, tile, dst_tile);
src_cs = ipu_pixelformat_to_colorspace(s_image->fmt->fourcc);
dest_cs = ipu_pixelformat_to_colorspace(d_image->fmt->fourcc);
if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
/* swap width/height for resizer */
- dest_width = d_image->tile[0].height;
- dest_height = d_image->tile[0].width;
+ dest_width = d_image->tile[dst_tile].height;
+ dest_height = d_image->tile[dst_tile].width;
} else {
- dest_width = d_image->tile[0].width;
- dest_height = d_image->tile[0].height;
+ dest_width = d_image->tile[dst_tile].width;
+ dest_height = d_image->tile[dst_tile].height;
}
/* setup the IC resizer and CSC */
ret = ipu_ic_task_init(chan->ic,
- s_image->tile[0].width,
- s_image->tile[0].height,
+ s_image->tile[tile].width,
+ s_image->tile[tile].height,
dest_width,
dest_height,
src_cs, dest_cs);
@@ -721,27 +723,27 @@ static int convert_start(struct ipu_image_convert_run *run)
/* init the source MEM-->IC PP IDMAC channel */
init_idmac_channel(ctx, chan->in_chan, s_image,
- IPU_ROTATE_NONE, false);
+ IPU_ROTATE_NONE, false, tile);
if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
/* init the IC PP-->MEM IDMAC channel */
init_idmac_channel(ctx, chan->out_chan, d_image,
- IPU_ROTATE_NONE, true);
+ IPU_ROTATE_NONE, true, tile);
/* init the MEM-->IC PP ROT IDMAC channel */
init_idmac_channel(ctx, chan->rotation_in_chan, d_image,
- ctx->rot_mode, true);
+ ctx->rot_mode, true, tile);
/* init the destination IC PP ROT-->MEM IDMAC channel */
init_idmac_channel(ctx, chan->rotation_out_chan, d_image,
- IPU_ROTATE_NONE, false);
+ IPU_ROTATE_NONE, false, tile);
/* now link IC PP-->MEM to MEM-->IC PP ROT */
ipu_idmac_link(chan->out_chan, chan->rotation_in_chan);
} else {
/* init the destination IC PP-->MEM IDMAC channel */
init_idmac_channel(ctx, chan->out_chan, d_image,
- ctx->rot_mode, false);
+ ctx->rot_mode, false, tile);
}
/* enable the IC */
@@ -799,7 +801,7 @@ static int do_run(struct ipu_image_convert_run *run)
list_del(&run->list);
chan->current_run = run;
- return convert_start(run);
+ return convert_start(run, 0);
}
/* hold irqlock when calling */
@@ -1430,14 +1432,22 @@ ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
!d_image->fmt->planar);
if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+ unsigned long intermediate_size = d_image->tile[0].size;
+ unsigned int i;
+
+ for (i = 1; i < ctx->num_tiles; i++) {
+ if (d_image->tile[i].size > intermediate_size)
+ intermediate_size = d_image->tile[i].size;
+ }
+
ret = alloc_dma_buf(priv, &ctx->rot_intermediate[0],
- d_image->tile[0].size);
+ intermediate_size);
if (ret)
goto out_free;
if (ctx->double_buffering) {
ret = alloc_dma_buf(priv,
&ctx->rot_intermediate[1],
- d_image->tile[0].size);
+ intermediate_size);
if (ret)
goto out_free_dmabuf0;
}
--
2.18.0
next prev parent reply other threads:[~2018-07-19 16:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-19 15:30 [PATCH v2 00/16] i.MX media mem2mem scaler Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 01/16] gpu: ipu-v3: ipu-ic: allow to manually set resize coefficients Philipp Zabel
2018-07-19 15:30 ` Philipp Zabel [this message]
2018-07-19 15:30 ` [PATCH v2 03/16] gpu: ipu-v3: image-convert: calculate per-tile " Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 04/16] gpu: ipu-v3: image-convert: reconfigure IC per tile Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 05/16] gpu: ipu-v3: image-convert: store tile top/left position Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 06/16] gpu: ipu-v3: image-convert: calculate tile dimensions and offsets outside fill_image Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 07/16] gpu: ipu-v3: image-convert: move tile alignment helpers Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 08/16] gpu: ipu-v3: image-convert: select optimal seam positions Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 09/16] gpu: ipu-v3: image-convert: fix debug output for varying tile sizes Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 10/16] gpu: ipu-v3: image-convert: relax tile width alignment for NV12 and NV16 Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 11/16] gpu: ipu-v3: image-convert: relax input alignment restrictions Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 12/16] gpu: ipu-v3: image-convert: relax output " Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 13/16] gpu: ipu-v3: image-convert: fix bytesperline adjustment Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 14/16] gpu: ipu-v3: image-convert: add some ASCII art to the exposition Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 15/16] gpu: ipu-v3: image-convert: disable double buffering if necessary Philipp Zabel
2018-07-19 15:30 ` [PATCH v2 16/16] media: imx: add mem2mem device Philipp Zabel
2018-07-22 18:30 ` [PATCH v2 00/16] i.MX media mem2mem scaler Steve Longerbeam
2018-07-22 19:11 ` Steve Longerbeam
2018-07-23 9:29 ` Philipp Zabel
2018-07-23 9:42 ` Philipp Zabel
2018-07-23 13:26 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180719153042.533-3-p.zabel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).