From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org,
Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Subject: Re: [PATCHv17 08/34] v4l2-dev: lock req_queue_mutex
Date: Tue, 14 Aug 2018 09:39:27 -0300 [thread overview]
Message-ID: <20180814093927.06fe2e50@coco.lan> (raw)
In-Reply-To: <d57197b6-e7c7-a338-bb47-201882b4fa72@xs4all.nl>
Em Tue, 14 Aug 2018 14:00:16 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> On 09/08/18 22:03, Mauro Carvalho Chehab wrote:
> > Em Sat, 4 Aug 2018 14:45:00 +0200
> > Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> >
> >> From: Hans Verkuil <hans.verkuil@cisco.com>
> >>
> >> We need to serialize streamon/off with queueing new requests.
> >> These ioctls may trigger the cancellation of a streaming
> >> operation, and that should not be mixed with queuing a new
> >> request at the same time.
> >>
> >> Finally close() needs this lock since that too can trigger the
> >> cancellation of a streaming operation.
> >>
> >> We take the req_queue_mutex here before any other locks since
> >> it is a very high-level lock.
> >>
> >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> >> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> >> ---
> >> drivers/media/v4l2-core/v4l2-dev.c | 13 +++++++++++++
> >> drivers/media/v4l2-core/v4l2-ioctl.c | 22 +++++++++++++++++++++-
> >> 2 files changed, 34 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c
> >> index 69e775930fc4..53018e4a4c78 100644
> >> --- a/drivers/media/v4l2-core/v4l2-dev.c
> >> +++ b/drivers/media/v4l2-core/v4l2-dev.c
> >> @@ -444,8 +444,21 @@ static int v4l2_release(struct inode *inode, struct file *filp)
> >> struct video_device *vdev = video_devdata(filp);
> >> int ret = 0;
> >>
> >> + /*
> >> + * We need to serialize the release() with queueing new requests.
> >> + * The release() may trigger the cancellation of a streaming
> >> + * operation, and that should not be mixed with queueing a new
> >> + * request at the same time.
> >> + */
> >> + if (v4l2_device_supports_requests(vdev->v4l2_dev))
> >> + mutex_lock(&vdev->v4l2_dev->mdev->req_queue_mutex);
> >> +
> >> if (vdev->fops->release)
> >> ret = vdev->fops->release(filp);
> >> +
> >> + if (v4l2_device_supports_requests(vdev->v4l2_dev))
> >> + mutex_unlock(&vdev->v4l2_dev->mdev->req_queue_mutex);
> >> +
> >
> > This will very likely generate sparse warnings. See my discussions
> > with that regards with Linus.
> >
> > The only way to avoid it would be to do something like:
> >
> > if (v4l2_device_supports_requests(vdev->v4l2_dev)) {
> > mutex_lock(&vdev->v4l2_dev->mdev->req_queue_mutex);
> > if (vdev->fops->release)
> > ret = vdev->fops->release(filp);
> > mutex_unlock(&vdev->v4l2_dev->mdev->req_queue_mutex);
> > } else {
> > if (vdev->fops->release)
> > ret = vdev->fops->release(filp);
> > }
>
> I've changed this.
>
> >
> >> if (vdev->dev_debug & V4L2_DEV_DEBUG_FOP)
> >> dprintk("%s: release\n",
> >> video_device_node_name(vdev));
> >> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> >> index 54afc9c7ee6e..ea475d833dd6 100644
> >> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> >> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> >> @@ -2780,6 +2780,7 @@ static long __video_do_ioctl(struct file *file,
> >> unsigned int cmd, void *arg)
> >> {
> >> struct video_device *vfd = video_devdata(file);
> >> + struct mutex *req_queue_lock = NULL;
> >> struct mutex *lock; /* ioctl serialization mutex */
> >> const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
> >> bool write_only = false;
> >> @@ -2799,10 +2800,27 @@ static long __video_do_ioctl(struct file *file,
> >> if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags))
> >> vfh = file->private_data;
> >>
> >> + /*
> >> + * We need to serialize streamon/off with queueing new requests.
> >> + * These ioctls may trigger the cancellation of a streaming
> >> + * operation, and that should not be mixed with queueing a new
> >> + * request at the same time.
> >> + */
> >> + if (v4l2_device_supports_requests(vfd->v4l2_dev) &&
> >> + (cmd == VIDIOC_STREAMON || cmd == VIDIOC_STREAMOFF)) {
> >> + req_queue_lock = &vfd->v4l2_dev->mdev->req_queue_mutex;
> >> +
> >> + if (mutex_lock_interruptible(req_queue_lock))
> >> + return -ERESTARTSYS;
> >> + }
> >> +
> >> lock = v4l2_ioctl_get_lock(vfd, vfh, cmd, arg);
> >>
> >> - if (lock && mutex_lock_interruptible(lock))
> >> + if (lock && mutex_lock_interruptible(lock)) {
> >> + if (req_queue_lock)
> >> + mutex_unlock(req_queue_lock);
> >> return -ERESTARTSYS;
> >> + }
> >
> > Same applies here.
>
> I've kept this. I don't get any sparse warnings for this, but if they appear
> then the only way to fix it is likely to split this function into two,
> one that takes the lock(s) and one unlocked variant that does the actual
> job.
>
> If we need that, then that's a separate patch on top of this patch series.
Works for me.
Thanks,
Mauro
next prev parent reply other threads:[~2018-08-14 15:26 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-04 12:44 [PATCHv17 00/34] Request API Hans Verkuil
2018-08-04 12:44 ` [PATCHv17 01/34] Documentation: v4l: document request API Hans Verkuil
2018-08-06 23:44 ` Pavel Machek
2018-08-09 17:43 ` Mauro Carvalho Chehab
2018-08-10 7:20 ` Hans Verkuil
2018-08-14 8:21 ` Mauro Carvalho Chehab
2018-08-14 7:57 ` Hans Verkuil
2018-08-14 8:48 ` Mauro Carvalho Chehab
2018-08-14 9:51 ` Hans Verkuil
2018-08-14 12:18 ` Mauro Carvalho Chehab
2018-08-04 12:44 ` [PATCHv17 02/34] uapi/linux/media.h: add " Hans Verkuil
2018-08-09 17:53 ` Mauro Carvalho Chehab
2018-08-10 7:21 ` Hans Verkuil
2018-08-14 8:46 ` Mauro Carvalho Chehab
2018-08-14 9:57 ` Hans Verkuil
2018-08-14 12:34 ` Mauro Carvalho Chehab
2018-08-04 12:44 ` [PATCHv17 03/34] media-request: implement media requests Hans Verkuil
2018-08-09 18:37 ` Mauro Carvalho Chehab
2018-08-10 7:28 ` Hans Verkuil
2018-08-14 13:33 ` Hans Verkuil
2018-08-04 12:44 ` [PATCHv17 04/34] media: doc: Add media-request.h header to documentation build Hans Verkuil
2018-08-09 18:43 ` Mauro Carvalho Chehab
2018-08-04 12:44 ` [PATCHv17 05/34] media-request: add media_request_get_by_fd Hans Verkuil
2018-08-09 19:55 ` Mauro Carvalho Chehab
2018-08-10 7:32 ` Hans Verkuil
2018-08-14 9:00 ` Mauro Carvalho Chehab
2018-08-04 12:44 ` [PATCHv17 06/34] media-request: add media_request_object_find Hans Verkuil
2018-08-09 19:56 ` Mauro Carvalho Chehab
2018-08-04 12:44 ` [PATCHv17 07/34] v4l2-device.h: add v4l2_device_supports_requests() helper Hans Verkuil
2018-08-09 19:57 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 08/34] v4l2-dev: lock req_queue_mutex Hans Verkuil
2018-08-09 20:03 ` Mauro Carvalho Chehab
2018-08-10 7:39 ` Hans Verkuil
2018-08-14 8:09 ` Mauro Carvalho Chehab
2018-08-14 12:00 ` Hans Verkuil
2018-08-14 12:39 ` Mauro Carvalho Chehab [this message]
2018-08-04 12:45 ` [PATCHv17 09/34] videodev2.h: add request_fd field to v4l2_ext_controls Hans Verkuil
2018-08-09 20:04 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 10/34] v4l2-ctrls: v4l2_ctrl_add_handler: add from_other_dev Hans Verkuil
2018-08-09 20:10 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 11/34] v4l2-ctrls: prepare internal structs for request API Hans Verkuil
2018-08-09 20:16 ` Mauro Carvalho Chehab
2018-08-10 7:41 ` Hans Verkuil
2018-08-04 12:45 ` [PATCHv17 12/34] v4l2-ctrls: alloc memory for p_req Hans Verkuil
2018-08-09 20:19 ` Mauro Carvalho Chehab
2018-08-10 7:41 ` Hans Verkuil
2018-08-04 12:45 ` [PATCHv17 13/34] v4l2-ctrls: use ref in helper instead of ctrl Hans Verkuil
2018-08-09 20:22 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 14/34] v4l2-ctrls: add core request support Hans Verkuil
2018-08-13 10:55 ` Mauro Carvalho Chehab
2018-08-14 8:34 ` Hans Verkuil
2018-08-14 8:59 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 15/34] v4l2-ctrls: support g/s_ext_ctrls for requests Hans Verkuil
2018-08-13 11:05 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 16/34] v4l2-ctrls: add v4l2_ctrl_request_hdl_find/put/ctrl_find functions Hans Verkuil
2018-08-13 11:07 ` Mauro Carvalho Chehab
2018-08-14 8:45 ` Hans Verkuil
2018-08-14 8:55 ` Mauro Carvalho Chehab
2018-08-14 10:50 ` Hans Verkuil
2018-08-04 12:45 ` [PATCHv17 17/34] vb2: store userspace data in vb2_v4l2_buffer Hans Verkuil
2018-08-13 11:15 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 18/34] davinci_vpfe: remove bogus vb2->state check Hans Verkuil
2018-08-13 11:17 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 19/34] vb2: drop VB2_BUF_STATE_PREPARED, use bool prepared/synced instead Hans Verkuil
2018-08-13 11:30 ` Mauro Carvalho Chehab
2018-08-14 8:58 ` Hans Verkuil
2018-08-14 9:06 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 20/34] videodev2.h: Add request_fd field to v4l2_buffer Hans Verkuil
2018-08-13 11:41 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 21/34] vb2: add init_buffer buffer op Hans Verkuil
2018-08-13 11:56 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 22/34] videobuf2-core: embed media_request_object Hans Verkuil
2018-08-13 11:58 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 23/34] videobuf2-core: integrate with media requests Hans Verkuil
2018-08-13 12:09 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 24/34] videobuf2-v4l2: " Hans Verkuil
2018-08-13 14:30 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 25/34] videobuf2-core: add request helper functions Hans Verkuil
2018-08-13 14:50 ` Mauro Carvalho Chehab
2018-08-14 7:22 ` Hans Verkuil
2018-08-04 12:45 ` [PATCHv17 26/34] videobuf2-v4l2: add vb2_request_queue/validate helpers Hans Verkuil
2018-08-13 14:53 ` Mauro Carvalho Chehab
2018-08-14 7:19 ` Hans Verkuil
2018-08-14 7:49 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 27/34] videobuf2-core: add uses_requests/qbuf flags Hans Verkuil
2018-08-13 14:55 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 28/34] videobuf2-v4l2: refuse qbuf if queue uses requests or vv Hans Verkuil
2018-08-13 14:56 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 29/34] v4l2-mem2mem: add vb2_m2m_request_queue Hans Verkuil
2018-08-13 15:02 ` Mauro Carvalho Chehab
2018-08-14 7:26 ` Hans Verkuil
2018-08-04 12:45 ` [PATCHv17 30/34] vim2m: use workqueue Hans Verkuil
2018-08-13 15:05 ` Mauro Carvalho Chehab
2018-08-14 7:28 ` Hans Verkuil
2018-08-14 7:41 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 31/34] vim2m: support requests Hans Verkuil
2018-08-06 21:02 ` Ezequiel Garcia
2018-08-13 15:08 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 32/34] vivid: add mc Hans Verkuil
2018-08-13 15:09 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 33/34] vivid: add request support Hans Verkuil
2018-08-13 15:11 ` Mauro Carvalho Chehab
2018-08-04 12:45 ` [PATCHv17 34/34] RFC: media-requests: add debugfs node Hans Verkuil
2018-08-13 15:15 ` Mauro Carvalho Chehab
2018-08-14 7:33 ` Hans Verkuil
2018-08-14 7:43 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180814093927.06fe2e50@coco.lan \
--to=mchehab+samsung@kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).