[PATCH 0/2] media: adv748x: Allow probe with a single output endpoint

[PATCH 0/2] media: adv748x: Allow probe with a single output endpoint

[Jacopo Mondi]

Hello Laurent, Kieran, Niklas,
   to address the Ebisu board use case, this series allows the adv748x driver
to probe with a single output connection defined.

This series (hopefully) allows capturing on E3, but considering the fixed
routing between HDMI->TXA and CVBS->TXB, only from HDMI input.

Not having an Ebisu, I have tested on M3-W Salvator-X disabling the TXB output
and the CSI20 interface connected to it. I'm able to capture with HDMI with
no visible regressions.

Laurent: to help testing on E3, I have pushed this series on top of Ebisu HDMI
and CVBS enablement to
git://jmondi.org/linux ebisu/renesas-drivers/adv748x_probe

Thanks
  j

Jacopo Mondi (2):
  media: i2c: adv748x: Support probing a single output
  media: i2c: adv748x: Handle TX[A|B] power management

 drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
 drivers/media/i2c/adv748x/adv748x-core.c | 90 ++++++++++++++++++--------------
 drivers/media/i2c/adv748x/adv748x-csi2.c | 22 ++------
 drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
 drivers/media/i2c/adv748x/adv748x.h      |  6 ++-
 5 files changed, 61 insertions(+), 61 deletions(-)

--
2.7.4

[PATCH 1/2] media: i2c: adv748x: Support probing a single output

[Jacopo Mondi]

Currently the adv748x driver refuses to probe if both its output endpoints
(TXA and TXB) are not connected.

Make the driver support probing with (at least) one output endpoint connected
and protect the cleanup function from accessing un-initialized fields.

Following patches will fix other user of un-initialized TXs in the driver,
such as power management functions.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-core.c | 38 +++++++++++++++++++++++++-------
 drivers/media/i2c/adv748x/adv748x-csi2.c | 17 ++++----------
 drivers/media/i2c/adv748x/adv748x.h      |  2 ++
 3 files changed, 36 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 6ca88daa..78d5996 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -654,6 +654,24 @@ static int adv748x_probe(struct i2c_client *client,
 		goto err_cleanup_clients;
 	}
 
+	/*
+	 * We can not use container_of to get back to the state with two TXs;
+	 * Initialize the TXs's fields unconditionally on the endpoint
+	 * presence to access them later.
+	 */
+	state->txa.state = state->txb.state = state;
+	state->txa.page = ADV748X_PAGE_TXA;
+	state->txb.page = ADV748X_PAGE_TXB;
+	state->txa.port = ADV748X_PORT_TXA;
+	state->txb.port = ADV748X_PORT_TXB;
+
+	if (!is_tx_enabled(&state->txa) &&
+	    !is_tx_enabled(&state->txb)) {
+		ret = -ENODEV;
+		adv_err(state, "No output endpoint defined\n");
+		goto err_cleanup_clients;
+	}
+
 	/* SW reset ADV748X to its default values */
 	ret = adv748x_reset(state);
 	if (ret) {
@@ -676,17 +694,21 @@ static int adv748x_probe(struct i2c_client *client,
 	}
 
 	/* Initialise TXA */
-	ret = adv748x_csi2_init(state, &state->txa);
-	if (ret) {
-		adv_err(state, "Failed to probe TXA");
-		goto err_cleanup_afe;
+	if (is_tx_enabled(&state->txa)) {
+		ret = adv748x_csi2_init(state, &state->txa);
+		if (ret) {
+			adv_err(state, "Failed to probe TXA");
+			goto err_cleanup_afe;
+		}
 	}
 
 	/* Initialise TXB */
-	ret = adv748x_csi2_init(state, &state->txb);
-	if (ret) {
-		adv_err(state, "Failed to probe TXB");
-		goto err_cleanup_txa;
+	if (is_tx_enabled(&state->txb)) {
+		ret = adv748x_csi2_init(state, &state->txb);
+		if (ret) {
+			adv_err(state, "Failed to probe TXB");
+			goto err_cleanup_txa;
+		}
 	}
 
 	return 0;
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 469be87..709cdea 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -266,20 +266,8 @@ static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
 
 int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 {
-	struct device_node *ep;
 	int ret;
 
-	/* We can not use container_of to get back to the state with two TXs */
-	tx->state = state;
-	tx->page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
-
-	ep = state->endpoints[is_txa(tx) ? ADV748X_PORT_TXA : ADV748X_PORT_TXB];
-	if (!ep) {
-		adv_err(state, "No endpoint found for %s\n",
-				is_txa(tx) ? "txa" : "txb");
-		return -ENODEV;
-	}
-
 	/* Initialise the virtual channel */
 	adv748x_csi2_set_virtual_channel(tx, 0);
 
@@ -288,7 +276,7 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 			    is_txa(tx) ? "txa" : "txb");
 
 	/* Ensure that matching is based upon the endpoint fwnodes */
-	tx->sd.fwnode = of_fwnode_handle(ep);
+	tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
 
 	/* Register internal ops for incremental subdev registration */
 	tx->sd.internal_ops = &adv748x_csi2_internal_ops;
@@ -321,6 +309,9 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 
 void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
 {
+	if (!is_tx_enabled(tx))
+		return;
+
 	v4l2_async_unregister_subdev(&tx->sd);
 	media_entity_cleanup(&tx->sd.entity);
 	v4l2_ctrl_handler_free(&tx->ctrl_hdl);
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 65f8374..1cf46c40 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -82,6 +82,7 @@ struct adv748x_csi2 {
 	struct adv748x_state *state;
 	struct v4l2_mbus_framefmt format;
 	unsigned int page;
+	unsigned int port;
 
 	struct media_pad pads[ADV748X_CSI2_NR_PADS];
 	struct v4l2_ctrl_handler ctrl_hdl;
@@ -91,6 +92,7 @@ struct adv748x_csi2 {
 
 #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
 #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
+#define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
 
 enum adv748x_hdmi_pads {
 	ADV748X_HDMI_SINK,
-- 
2.7.4

Re: [PATCH 1/2] media: i2c: adv748x: Support probing a single output

[Kieran Bingham]

Hi Jacopo,

Thank you for the patch,


On 27/08/18 12:28, Jacopo Mondi wrote:
> Currently the adv748x driver refuses to probe if both its output endpoints
> (TXA and TXB) are not connected.
> 
> Make the driver support probing with (at least) one output endpoint connected
> and protect the cleanup function from accessing un-initialized fields.
> 
> Following patches will fix other user of un-initialized TXs in the driver,
> such as power management functions.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 38 +++++++++++++++++++++++++-------
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 17 ++++----------
>  drivers/media/i2c/adv748x/adv748x.h      |  2 ++
>  3 files changed, 36 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 6ca88daa..78d5996 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -654,6 +654,24 @@ static int adv748x_probe(struct i2c_client *client,
>  		goto err_cleanup_clients;
>  	}
>  
> +	/*
> +	 * We can not use container_of to get back to the state with two TXs;
> +	 * Initialize the TXs's fields unconditionally on the endpoint
> +	 * presence to access them later.
> +	 */
> +	state->txa.state = state->txb.state = state;
> +	state->txa.page = ADV748X_PAGE_TXA;
> +	state->txb.page = ADV748X_PAGE_TXB;
> +	state->txa.port = ADV748X_PORT_TXA;
> +	state->txb.port = ADV748X_PORT_TXB;
> +

Initialising this data here feels a bit hacky...


> +	if (!is_tx_enabled(&state->txa) &&
> +	    !is_tx_enabled(&state->txb)) {

Could we make is_tx_enabled() based on the information it needs?

	is_tx_enabled(ADV748X_PORT_TXA);

Or perhaps:
	is_port_enabled(ADV748X_PORT_TXA)
	


> +		ret = -ENODEV;
> +		adv_err(state, "No output endpoint defined\n");
> +		goto err_cleanup_clients;
> +	}
> +

I approached this slightly differently at [0], by allowing the CSI
object to initialise, but if they return -ENODEV, then it's fine.

The only thing missing from [0] is a check to see if at least one of the
CSI devices probed.



You might be interested in [1], from my old 'adv748x/dev' branch [2] for
looking at the link creation too.

[0]
https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/commit/?h=adv748x/for-next&id=ee53e0f7e6e0f3dacc79dcf157ce3c403b17ec14

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/commit/?h=adv748x/dev&id=e0e975d73a70a5b73ad674e206103cd7df983a04


[2]
https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/log/?h=adv748x/dev


>  	/* SW reset ADV748X to its default values */
>  	ret = adv748x_reset(state);
>  	if (ret) {
> @@ -676,17 +694,21 @@ static int adv748x_probe(struct i2c_client *client,
>  	}
>  
>  	/* Initialise TXA */
> -	ret = adv748x_csi2_init(state, &state->txa);
> -	if (ret) {
> -		adv_err(state, "Failed to probe TXA");
> -		goto err_cleanup_afe;
> +	if (is_tx_enabled(&state->txa)) {
> +		ret = adv748x_csi2_init(state, &state->txa);
> +		if (ret) {
> +			adv_err(state, "Failed to probe TXA");
> +			goto err_cleanup_afe;
> +		}
>  	}
>  
>  	/* Initialise TXB */
> -	ret = adv748x_csi2_init(state, &state->txb);
> -	if (ret) {
> -		adv_err(state, "Failed to probe TXB");
> -		goto err_cleanup_txa;
> +	if (is_tx_enabled(&state->txb)) {
> +		ret = adv748x_csi2_init(state, &state->txb);
> +		if (ret) {
> +			adv_err(state, "Failed to probe TXB");
> +			goto err_cleanup_txa;
> +		}
>  	}
>  
>  	return 0;
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 469be87..709cdea 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -266,20 +266,8 @@ static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
>  
>  int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  {
> -	struct device_node *ep;
>  	int ret;
>  
> -	/* We can not use container_of to get back to the state with two TXs */
> -	tx->state = state;
> -	tx->page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> -
> -	ep = state->endpoints[is_txa(tx) ? ADV748X_PORT_TXA : ADV748X_PORT_TXB];
> -	if (!ep) {
> -		adv_err(state, "No endpoint found for %s\n",
> -				is_txa(tx) ? "txa" : "txb");

If you used the -ENODEV approach, this adv_err should be removed.

> -		return -ENODEV;
> -	}
> -
>  	/* Initialise the virtual channel */
>  	adv748x_csi2_set_virtual_channel(tx, 0);
>  
> @@ -288,7 +276,7 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  			    is_txa(tx) ? "txa" : "txb");
>  
>  	/* Ensure that matching is based upon the endpoint fwnodes */
> -	tx->sd.fwnode = of_fwnode_handle(ep);
> +	tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
>  
>  	/* Register internal ops for incremental subdev registration */
>  	tx->sd.internal_ops = &adv748x_csi2_internal_ops;
> @@ -321,6 +309,9 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  
>  void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
>  {
> +	if (!is_tx_enabled(tx))
> +		return;
> +
>  	v4l2_async_unregister_subdev(&tx->sd);
>  	media_entity_cleanup(&tx->sd.entity);
>  	v4l2_ctrl_handler_free(&tx->ctrl_hdl);
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index 65f8374..1cf46c40 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -82,6 +82,7 @@ struct adv748x_csi2 {
>  	struct adv748x_state *state;
>  	struct v4l2_mbus_framefmt format;
>  	unsigned int page;
> +	unsigned int port;
>  
>  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
>  	struct v4l2_ctrl_handler ctrl_hdl;
> @@ -91,6 +92,7 @@ struct adv748x_csi2 {
>  
>  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
>  #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
> +#define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)

>  
>  enum adv748x_hdmi_pads {
>  	ADV748X_HDMI_SINK,
> 

Re: [PATCH 1/2] media: i2c: adv748x: Support probing a single output

[jacopo mondi]

[-- Attachment #1: Type: text/plain, Size: 6911 bytes --]

Hi Kieran,

On Tue, Aug 28, 2018 at 04:26:43PM +0100, Kieran Bingham wrote:
> Hi Jacopo,
>
> Thank you for the patch,
>
>
> On 27/08/18 12:28, Jacopo Mondi wrote:
> > Currently the adv748x driver refuses to probe if both its output endpoints
> > (TXA and TXB) are not connected.
> >
> > Make the driver support probing with (at least) one output endpoint connected
> > and protect the cleanup function from accessing un-initialized fields.
> >
> > Following patches will fix other user of un-initialized TXs in the driver,
> > such as power management functions.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/media/i2c/adv748x/adv748x-core.c | 38 +++++++++++++++++++++++++-------
> >  drivers/media/i2c/adv748x/adv748x-csi2.c | 17 ++++----------
> >  drivers/media/i2c/adv748x/adv748x.h      |  2 ++
> >  3 files changed, 36 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> > index 6ca88daa..78d5996 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > @@ -654,6 +654,24 @@ static int adv748x_probe(struct i2c_client *client,
> >  		goto err_cleanup_clients;
> >  	}
> >
> > +	/*
> > +	 * We can not use container_of to get back to the state with two TXs;
> > +	 * Initialize the TXs's fields unconditionally on the endpoint
> > +	 * presence to access them later.
> > +	 */
> > +	state->txa.state = state->txb.state = state;
> > +	state->txa.page = ADV748X_PAGE_TXA;
> > +	state->txb.page = ADV748X_PAGE_TXB;
> > +	state->txa.port = ADV748X_PORT_TXA;
> > +	state->txb.port = ADV748X_PORT_TXB;
> > +
>
> Initialising this data here feels a bit hacky...

Possibly, yes.
I'm going to move this back to csi2_init() and call it
unconditionally, but I don't like returning an error if not having a
TX enabled is not an error. I'll go for

        if (!is_tx_enabled(tx))
                return 0;
>
>
> > +	if (!is_tx_enabled(&state->txa) &&
> > +	    !is_tx_enabled(&state->txb)) {
>
> Could we make is_tx_enabled() based on the information it needs?
>
> 	is_tx_enabled(ADV748X_PORT_TXA);
>
> Or perhaps:
> 	is_port_enabled(ADV748X_PORT_TXA)
>

We could, but why? Where's the benefit?

>
> > +		ret = -ENODEV;
> > +		adv_err(state, "No output endpoint defined\n");
> > +		goto err_cleanup_clients;
> > +	}
> > +
>
> I approached this slightly differently at [0], by allowing the CSI
> object to initialise, but if they return -ENODEV, then it's fine.

I see. Not my preference actually, but I'll change in v2 as you
suggested above (the tx initialization in csi2_init() )

Thanks
  j
>
> The only thing missing from [0] is a check to see if at least one of the
> CSI devices probed.
>
>
>
> You might be interested in [1], from my old 'adv748x/dev' branch [2] for
> looking at the link creation too.
>
> [0]
> https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/commit/?h=adv748x/for-next&id=ee53e0f7e6e0f3dacc79dcf157ce3c403b17ec14
>
> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/commit/?h=adv748x/dev&id=e0e975d73a70a5b73ad674e206103cd7df983a04
>
>
> [2]
> https://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git/log/?h=adv748x/dev
>
>
> >  	/* SW reset ADV748X to its default values */
> >  	ret = adv748x_reset(state);
> >  	if (ret) {
> > @@ -676,17 +694,21 @@ static int adv748x_probe(struct i2c_client *client,
> >  	}
> >
> >  	/* Initialise TXA */
> > -	ret = adv748x_csi2_init(state, &state->txa);
> > -	if (ret) {
> > -		adv_err(state, "Failed to probe TXA");
> > -		goto err_cleanup_afe;
> > +	if (is_tx_enabled(&state->txa)) {
> > +		ret = adv748x_csi2_init(state, &state->txa);
> > +		if (ret) {
> > +			adv_err(state, "Failed to probe TXA");
> > +			goto err_cleanup_afe;
> > +		}
> >  	}
> >
> >  	/* Initialise TXB */
> > -	ret = adv748x_csi2_init(state, &state->txb);
> > -	if (ret) {
> > -		adv_err(state, "Failed to probe TXB");
> > -		goto err_cleanup_txa;
> > +	if (is_tx_enabled(&state->txb)) {
> > +		ret = adv748x_csi2_init(state, &state->txb);
> > +		if (ret) {
> > +			adv_err(state, "Failed to probe TXB");
> > +			goto err_cleanup_txa;
> > +		}
> >  	}
> >
> >  	return 0;
> > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > index 469be87..709cdea 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > @@ -266,20 +266,8 @@ static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
> >
> >  int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
> >  {
> > -	struct device_node *ep;
> >  	int ret;
> >
> > -	/* We can not use container_of to get back to the state with two TXs */
> > -	tx->state = state;
> > -	tx->page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> > -
> > -	ep = state->endpoints[is_txa(tx) ? ADV748X_PORT_TXA : ADV748X_PORT_TXB];
> > -	if (!ep) {
> > -		adv_err(state, "No endpoint found for %s\n",
> > -				is_txa(tx) ? "txa" : "txb");
>
> If you used the -ENODEV approach, this adv_err should be removed.
>
> > -		return -ENODEV;
> > -	}
> > -
> >  	/* Initialise the virtual channel */
> >  	adv748x_csi2_set_virtual_channel(tx, 0);
> >
> > @@ -288,7 +276,7 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
> >  			    is_txa(tx) ? "txa" : "txb");
> >
> >  	/* Ensure that matching is based upon the endpoint fwnodes */
> > -	tx->sd.fwnode = of_fwnode_handle(ep);
> > +	tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
> >
> >  	/* Register internal ops for incremental subdev registration */
> >  	tx->sd.internal_ops = &adv748x_csi2_internal_ops;
> > @@ -321,6 +309,9 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
> >
> >  void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
> >  {
> > +	if (!is_tx_enabled(tx))
> > +		return;
> > +
> >  	v4l2_async_unregister_subdev(&tx->sd);
> >  	media_entity_cleanup(&tx->sd.entity);
> >  	v4l2_ctrl_handler_free(&tx->ctrl_hdl);
> > diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> > index 65f8374..1cf46c40 100644
> > --- a/drivers/media/i2c/adv748x/adv748x.h
> > +++ b/drivers/media/i2c/adv748x/adv748x.h
> > @@ -82,6 +82,7 @@ struct adv748x_csi2 {
> >  	struct adv748x_state *state;
> >  	struct v4l2_mbus_framefmt format;
> >  	unsigned int page;
> > +	unsigned int port;
> >
> >  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
> >  	struct v4l2_ctrl_handler ctrl_hdl;
> > @@ -91,6 +92,7 @@ struct adv748x_csi2 {
> >
> >  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
> >  #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
> > +#define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
>
> >
> >  enum adv748x_hdmi_pads {
> >  	ADV748X_HDMI_SINK,
> >
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH 2/2] media: i2c: adv748x: Handle TX[A|B] power management

[Jacopo Mondi]

As the driver is now allowed to probe with a single output endpoint,
power management routines shall now take into account the case a CSI-2 TX
is not enabled.

Unify the adv748x_tx_power() routine to handle transparently TXA and TXB,
and enable the CSI-2 outputs conditionally.

The AFE and HDMI backends have fixed output routes, so enable the designated
CSI-2 output according to that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
 drivers/media/i2c/adv748x/adv748x-core.c | 52 +++++++++++++-------------------
 drivers/media/i2c/adv748x/adv748x-csi2.c |  5 ---
 drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
 drivers/media/i2c/adv748x/adv748x.h      |  4 +--
 5 files changed, 25 insertions(+), 40 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index edd25e8..6d78105 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -286,7 +286,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
 			goto unlock;
 	}
 
-	ret = adv748x_txb_power(state, enable);
+	ret = adv748x_tx_power(&state->txb, enable);
 	if (ret)
 		goto unlock;
 
diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 78d5996..0adbcb6 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -292,33 +292,16 @@ static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
 	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
 };
 
-int adv748x_txa_power(struct adv748x_state *state, bool on)
+int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
 {
+	struct adv748x_state *state = tx->state;
+	const struct adv748x_reg_value *reglist;
 	int val;
 
-	val = txa_read(state, ADV748X_CSI_FS_AS_LS);
-	if (val < 0)
-		return val;
-
-	/*
-	 * This test against BIT(6) is not documented by the datasheet, but was
-	 * specified in the downstream driver.
-	 * Track with a WARN_ONCE to determine if it is ever set by HW.
-	 */
-	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
-			"Enabling with unknown bit set");
-
-	if (on)
-		return adv748x_write_regs(state, adv748x_power_up_txa_4lane);
-
-	return adv748x_write_regs(state, adv748x_power_down_txa_4lane);
-}
-
-int adv748x_txb_power(struct adv748x_state *state, bool on)
-{
-	int val;
+	if (!is_tx_enabled(tx))
+		return 0;
 
-	val = txb_read(state, ADV748X_CSI_FS_AS_LS);
+	val = tx_read(tx, ADV748X_CSI_FS_AS_LS);
 	if (val < 0)
 		return val;
 
@@ -331,9 +314,13 @@ int adv748x_txb_power(struct adv748x_state *state, bool on)
 			"Enabling with unknown bit set");
 
 	if (on)
-		return adv748x_write_regs(state, adv748x_power_up_txb_1lane);
+		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
+				       adv748x_power_up_txb_1lane;
+	else
+		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
+				       adv748x_power_down_txb_1lane;
 
-	return adv748x_write_regs(state, adv748x_power_down_txb_1lane);
+	return adv748x_write_regs(state, reglist);
 }
 
 /* -----------------------------------------------------------------------------
@@ -482,6 +469,7 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
 static int adv748x_reset(struct adv748x_state *state)
 {
 	int ret;
+	u8 regval = ADV748X_IO_10_PIX_OUT_EN;
 
 	ret = adv748x_write_regs(state, adv748x_sw_reset);
 	if (ret < 0)
@@ -496,22 +484,24 @@ static int adv748x_reset(struct adv748x_state *state)
 	if (ret)
 		return ret;
 
-	adv748x_txa_power(state, 0);
+	adv748x_tx_power(&state->txa, 0);
 
 	/* Init and power down TXB */
 	ret = adv748x_write_regs(state, adv748x_init_txb_1lane);
 	if (ret)
 		return ret;
 
-	adv748x_txb_power(state, 0);
+	adv748x_tx_power(&state->txb, 0);
 
 	/* Disable chip powerdown & Enable HDMI Rx block */
 	io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
 
-	/* Enable 4-lane CSI Tx & Pixel Port */
-	io_write(state, ADV748X_IO_10, ADV748X_IO_10_CSI4_EN |
-				       ADV748X_IO_10_CSI1_EN |
-				       ADV748X_IO_10_PIX_OUT_EN);
+	/* Conditionally enable 4-lane CSI Tx & Pixel Port */
+	if (is_tx_enabled(&state->txa))
+		regval |= ADV748X_IO_10_CSI4_EN;
+	if (is_tx_enabled(&state->txb))
+		regval |= ADV748X_IO_10_CSI1_EN;
+	io_write(state, ADV748X_IO_10, regval);
 
 	/* Use vid_std and v_freq as freerun resolution for CP */
 	cp_clrset(state, ADV748X_CP_CLMP_POS, ADV748X_CP_CLMP_POS_DIS_AUTO,
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 709cdea..36bc786 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -18,11 +18,6 @@
 
 #include "adv748x.h"
 
-static bool is_txa(struct adv748x_csi2 *tx)
-{
-	return tx == &tx->state->txa;
-}
-
 static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
 					    unsigned int vc)
 {
diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c
index aecc2a8..abb6568 100644
--- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
+++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
@@ -362,7 +362,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&state->mutex);
 
-	ret = adv748x_txa_power(state, enable);
+	ret = adv748x_tx_power(&state->txa, enable);
 	if (ret)
 		goto done;
 
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 1cf46c40..2e8d37a 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -93,6 +93,7 @@ struct adv748x_csi2 {
 #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
 #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
 #define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
+#define is_txa(_tx) ((_tx) == &(_tx)->state->txa)
 
 enum adv748x_hdmi_pads {
 	ADV748X_HDMI_SINK,
@@ -400,8 +401,7 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
 int adv748x_register_subdevs(struct adv748x_state *state,
 			     struct v4l2_device *v4l2_dev);
 
-int adv748x_txa_power(struct adv748x_state *state, bool on);
-int adv748x_txb_power(struct adv748x_state *state, bool on);
+int adv748x_tx_power(struct adv748x_csi2 *tx, bool on);
 
 int adv748x_afe_init(struct adv748x_afe *afe);
 void adv748x_afe_cleanup(struct adv748x_afe *afe);
-- 
2.7.4

Re: [PATCH 2/2] media: i2c: adv748x: Handle TX[A|B] power management

[Kieran Bingham]

Hi Jacopo,

Thank you for the patch,

On 27/08/18 12:28, Jacopo Mondi wrote:
> As the driver is now allowed to probe with a single output endpoint,
> power management routines shall now take into account the case a CSI-2 TX
> is not enabled.
> 
> Unify the adv748x_tx_power() routine to handle transparently TXA and TXB,
> and enable the CSI-2 outputs conditionally.

Great - I definitely want to see this code refactored. Ideally with a
full removal of the register lists ... but we can get there in stages :D

> 
> The AFE and HDMI backends have fixed output routes, so enable the designated
> CSI-2 output according to that.

Ah ... but what happens when the links can be changed dynamically ?
I guess we handle that then ...

> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
>  drivers/media/i2c/adv748x/adv748x-core.c | 52 +++++++++++++-------------------
>  drivers/media/i2c/adv748x/adv748x-csi2.c |  5 ---
>  drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
>  drivers/media/i2c/adv748x/adv748x.h      |  4 +--
>  5 files changed, 25 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
> index edd25e8..6d78105 100644
> --- a/drivers/media/i2c/adv748x/adv748x-afe.c
> +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
> @@ -286,7 +286,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
>  			goto unlock;
>  	}
>  
> -	ret = adv748x_txb_power(state, enable);
> +	ret = adv748x_tx_power(&state->txb, enable);
>  	if (ret)
>  		goto unlock;
>  
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 78d5996..0adbcb6 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -292,33 +292,16 @@ static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>  };
>  
> -int adv748x_txa_power(struct adv748x_state *state, bool on)
> +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
>  {
> +	struct adv748x_state *state = tx->state;
> +	const struct adv748x_reg_value *reglist;
>  	int val;
>  
> -	val = txa_read(state, ADV748X_CSI_FS_AS_LS);
> -	if (val < 0)
> -		return val;
> -
> -	/*
> -	 * This test against BIT(6) is not documented by the datasheet, but was
> -	 * specified in the downstream driver.
> -	 * Track with a WARN_ONCE to determine if it is ever set by HW.
> -	 */
> -	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
> -			"Enabling with unknown bit set");

I was going to query if this was dropped, but the check is identical in
the other function.

The original BSP driver had this condition as a 'fatal' error from what
I recall, which is why I kept it as a warning check.

I've only seen it fire once, when I had an incorrect power-on-off sequence.

I think the bit actually likely only gets set from one of the reglists
in the driver.

The bit is undocumented, and I didn't get any further detail from
querying analog devices. At somepoint I'd like to drop the WARN_ON with
an equivalent change which removes all references to this bit (whichever
entry in the register lists sets the bit).

But that's not an issue for this patch.



> -
> -	if (on)
> -		return adv748x_write_regs(state, adv748x_power_up_txa_4lane);
> -
> -	return adv748x_write_regs(state, adv748x_power_down_txa_4lane);
> -}
> -
> -int adv748x_txb_power(struct adv748x_state *state, bool on)
> -{
> -	int val;
> +	if (!is_tx_enabled(tx))
> +		return 0;
>  
> -	val = txb_read(state, ADV748X_CSI_FS_AS_LS);

I think we can remove txa_read(), txb_read() now  ?




> +	val = tx_read(tx, ADV748X_CSI_FS_AS_LS);
>  	if (val < 0)
>  		return val;
>  
> @@ -331,9 +314,13 @@ int adv748x_txb_power(struct adv748x_state *state, bool on)
>  			"Enabling with unknown bit set");
>  
>  	if (on)
> -		return adv748x_write_regs(state, adv748x_power_up_txb_1lane);
> +		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
> +				       adv748x_power_up_txb_1lane;
> +	else
> +		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
> +				       adv748x_power_down_txb_1lane;
>  
> -	return adv748x_write_regs(state, adv748x_power_down_txb_1lane);
> +	return adv748x_write_regs(state, reglist);
>  }
>  
>  /* -----------------------------------------------------------------------------
> @@ -482,6 +469,7 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
>  static int adv748x_reset(struct adv748x_state *state)
>  {
>  	int ret;
> +	u8 regval = ADV748X_IO_10_PIX_OUT_EN;

As discussed, I believe this refers to the 8-bit TTL I/O port.

Ideally - this functionality should be broken out to a separate port (or
pair of ports) - but that's not for here.

Keeping this here maintains the existing behaviour of the driver so
that's fine, but perhaps if you re-spin - could you add a comment to
state that the ADV748X_IO_10_PIX_OUT_EN refers to the non-supported TTL
IO port ?

>  
>  	ret = adv748x_write_regs(state, adv748x_sw_reset);
>  	if (ret < 0)
> @@ -496,22 +484,24 @@ static int adv748x_reset(struct adv748x_state *state)
>  	if (ret)
>  		return ret;
>  
> -	adv748x_txa_power(state, 0);
> +	adv748x_tx_power(&state->txa, 0);
>  
>  	/* Init and power down TXB */
>  	ret = adv748x_write_regs(state, adv748x_init_txb_1lane);
>  	if (ret)
>  		return ret;
>  
> -	adv748x_txb_power(state, 0);
> +	adv748x_tx_power(&state->txb, 0);
>  
>  	/* Disable chip powerdown & Enable HDMI Rx block */
>  	io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
>  
> -	/* Enable 4-lane CSI Tx & Pixel Port */
> -	io_write(state, ADV748X_IO_10, ADV748X_IO_10_CSI4_EN |
> -				       ADV748X_IO_10_CSI1_EN |
> -				       ADV748X_IO_10_PIX_OUT_EN);
> +	/* Conditionally enable 4-lane CSI Tx & Pixel Port */
> +	if (is_tx_enabled(&state->txa))
> +		regval |= ADV748X_IO_10_CSI4_EN;
> +	if (is_tx_enabled(&state->txb))
> +		regval |= ADV748X_IO_10_CSI1_EN;
> +	io_write(state, ADV748X_IO_10, regval);

Could be a bit of powersaving here :) Great.



>  	/* Use vid_std and v_freq as freerun resolution for CP */
>  	cp_clrset(state, ADV748X_CP_CLMP_POS, ADV748X_CP_CLMP_POS_DIS_AUTO,
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 709cdea..36bc786 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -18,11 +18,6 @@
>  
>  #include "adv748x.h"
>  
> -static bool is_txa(struct adv748x_csi2 *tx)
> -{
> -	return tx == &tx->state->txa;
> -}
> -
>  static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
>  					    unsigned int vc)
>  {
> diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> index aecc2a8..abb6568 100644
> --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
> +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> @@ -362,7 +362,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd, int enable)
>  
>  	mutex_lock(&state->mutex);
>  
> -	ret = adv748x_txa_power(state, enable);
> +	ret = adv748x_tx_power(&state->txa, enable);
>  	if (ret)
>  		goto done;
>  
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index 1cf46c40..2e8d37a 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -93,6 +93,7 @@ struct adv748x_csi2 {
>  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
>  #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
>  #define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
> +#define is_txa(_tx) ((_tx) == &(_tx)->state->txa)
>  
>  enum adv748x_hdmi_pads {
>  	ADV748X_HDMI_SINK,
> @@ -400,8 +401,7 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
>  int adv748x_register_subdevs(struct adv748x_state *state,
>  			     struct v4l2_device *v4l2_dev);
>  
> -int adv748x_txa_power(struct adv748x_state *state, bool on);
> -int adv748x_txb_power(struct adv748x_state *state, bool on);
> +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on);
>  
>  int adv748x_afe_init(struct adv748x_afe *afe);
>  void adv748x_afe_cleanup(struct adv748x_afe *afe);
> 

Re: [PATCH 2/2] media: i2c: adv748x: Handle TX[A|B] power management

[jacopo mondi]

[-- Attachment #1: Type: text/plain, Size: 8910 bytes --]

Hi Kieran,

On Tue, Aug 28, 2018 at 04:47:05PM +0100, Kieran Bingham wrote:
> Hi Jacopo,
>
> Thank you for the patch,
>
> On 27/08/18 12:28, Jacopo Mondi wrote:
> > As the driver is now allowed to probe with a single output endpoint,
> > power management routines shall now take into account the case a CSI-2 TX
> > is not enabled.
> >
> > Unify the adv748x_tx_power() routine to handle transparently TXA and TXB,
> > and enable the CSI-2 outputs conditionally.
>
> Great - I definitely want to see this code refactored. Ideally with a
> full removal of the register lists ... but we can get there in stages :D
>
> >
> > The AFE and HDMI backends have fixed output routes, so enable the designated
> > CSI-2 output according to that.
>
> Ah ... but what happens when the links can be changed dynamically ?
> I guess we handle that then ...
>
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
> >  drivers/media/i2c/adv748x/adv748x-core.c | 52 +++++++++++++-------------------
> >  drivers/media/i2c/adv748x/adv748x-csi2.c |  5 ---
> >  drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
> >  drivers/media/i2c/adv748x/adv748x.h      |  4 +--
> >  5 files changed, 25 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
> > index edd25e8..6d78105 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-afe.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
> > @@ -286,7 +286,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
> >  			goto unlock;
> >  	}
> >
> > -	ret = adv748x_txb_power(state, enable);
> > +	ret = adv748x_tx_power(&state->txb, enable);
> >  	if (ret)
> >  		goto unlock;
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> > index 78d5996..0adbcb6 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > @@ -292,33 +292,16 @@ static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
> >  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> >  };
> >
> > -int adv748x_txa_power(struct adv748x_state *state, bool on)
> > +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
> >  {
> > +	struct adv748x_state *state = tx->state;
> > +	const struct adv748x_reg_value *reglist;
> >  	int val;
> >
> > -	val = txa_read(state, ADV748X_CSI_FS_AS_LS);
> > -	if (val < 0)
> > -		return val;
> > -
> > -	/*
> > -	 * This test against BIT(6) is not documented by the datasheet, but was
> > -	 * specified in the downstream driver.
> > -	 * Track with a WARN_ONCE to determine if it is ever set by HW.
> > -	 */
> > -	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
> > -			"Enabling with unknown bit set");
>
> I was going to query if this was dropped, but the check is identical in
> the other function.
>
> The original BSP driver had this condition as a 'fatal' error from what
> I recall, which is why I kept it as a warning check.
>
> I've only seen it fire once, when I had an incorrect power-on-off sequence.
>
> I think the bit actually likely only gets set from one of the reglists
> in the driver.
>
> The bit is undocumented, and I didn't get any further detail from
> querying analog devices. At somepoint I'd like to drop the WARN_ON with
> an equivalent change which removes all references to this bit (whichever
> entry in the register lists sets the bit).
>
> But that's not an issue for this patch.
>
>
>
> > -
> > -	if (on)
> > -		return adv748x_write_regs(state, adv748x_power_up_txa_4lane);
> > -
> > -	return adv748x_write_regs(state, adv748x_power_down_txa_4lane);
> > -}
> > -
> > -int adv748x_txb_power(struct adv748x_state *state, bool on)
> > -{
> > -	int val;
> > +	if (!is_tx_enabled(tx))
> > +		return 0;
> >
> > -	val = txb_read(state, ADV748X_CSI_FS_AS_LS);
>
> I think we can remove txa_read(), txb_read() now  ?

Ah yes, I thought I did that already...

>
> > +	val = tx_read(tx, ADV748X_CSI_FS_AS_LS);
> >  	if (val < 0)
> >  		return val;
> >
> > @@ -331,9 +314,13 @@ int adv748x_txb_power(struct adv748x_state *state, bool on)
> >  			"Enabling with unknown bit set");
> >
> >  	if (on)
> > -		return adv748x_write_regs(state, adv748x_power_up_txb_1lane);
> > +		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
> > +				       adv748x_power_up_txb_1lane;
> > +	else
> > +		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
> > +				       adv748x_power_down_txb_1lane;
> >
> > -	return adv748x_write_regs(state, adv748x_power_down_txb_1lane);
> > +	return adv748x_write_regs(state, reglist);
> >  }
> >
> >  /* -----------------------------------------------------------------------------
> > @@ -482,6 +469,7 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
> >  static int adv748x_reset(struct adv748x_state *state)
> >  {
> >  	int ret;
> > +	u8 regval = ADV748X_IO_10_PIX_OUT_EN;
>
> As discussed, I believe this refers to the 8-bit TTL I/O port.
>
> Ideally - this functionality should be broken out to a separate port (or
> pair of ports) - but that's not for here.
>
> Keeping this here maintains the existing behaviour of the driver so
> that's fine, but perhaps if you re-spin - could you add a comment to
> state that the ADV748X_IO_10_PIX_OUT_EN refers to the non-supported TTL
> IO port ?

I would actually go and remove this with a patch on top of this one.

Will do in v2.

Thanks
   j

>
> >
> >  	ret = adv748x_write_regs(state, adv748x_sw_reset);
> >  	if (ret < 0)
> > @@ -496,22 +484,24 @@ static int adv748x_reset(struct adv748x_state *state)
> >  	if (ret)
> >  		return ret;
> >
> > -	adv748x_txa_power(state, 0);
> > +	adv748x_tx_power(&state->txa, 0);
> >
> >  	/* Init and power down TXB */
> >  	ret = adv748x_write_regs(state, adv748x_init_txb_1lane);
> >  	if (ret)
> >  		return ret;
> >
> > -	adv748x_txb_power(state, 0);
> > +	adv748x_tx_power(&state->txb, 0);
> >
> >  	/* Disable chip powerdown & Enable HDMI Rx block */
> >  	io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
> >
> > -	/* Enable 4-lane CSI Tx & Pixel Port */
> > -	io_write(state, ADV748X_IO_10, ADV748X_IO_10_CSI4_EN |
> > -				       ADV748X_IO_10_CSI1_EN |
> > -				       ADV748X_IO_10_PIX_OUT_EN);
> > +	/* Conditionally enable 4-lane CSI Tx & Pixel Port */
> > +	if (is_tx_enabled(&state->txa))
> > +		regval |= ADV748X_IO_10_CSI4_EN;
> > +	if (is_tx_enabled(&state->txb))
> > +		regval |= ADV748X_IO_10_CSI1_EN;
> > +	io_write(state, ADV748X_IO_10, regval);
>
> Could be a bit of powersaving here :) Great.
>
>
>
> >  	/* Use vid_std and v_freq as freerun resolution for CP */
> >  	cp_clrset(state, ADV748X_CP_CLMP_POS, ADV748X_CP_CLMP_POS_DIS_AUTO,
> > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > index 709cdea..36bc786 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > @@ -18,11 +18,6 @@
> >
> >  #include "adv748x.h"
> >
> > -static bool is_txa(struct adv748x_csi2 *tx)
> > -{
> > -	return tx == &tx->state->txa;
> > -}
> > -
> >  static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
> >  					    unsigned int vc)
> >  {
> > diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > index aecc2a8..abb6568 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > @@ -362,7 +362,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd, int enable)
> >
> >  	mutex_lock(&state->mutex);
> >
> > -	ret = adv748x_txa_power(state, enable);
> > +	ret = adv748x_tx_power(&state->txa, enable);
> >  	if (ret)
> >  		goto done;
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> > index 1cf46c40..2e8d37a 100644
> > --- a/drivers/media/i2c/adv748x/adv748x.h
> > +++ b/drivers/media/i2c/adv748x/adv748x.h
> > @@ -93,6 +93,7 @@ struct adv748x_csi2 {
> >  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
> >  #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
> >  #define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
> > +#define is_txa(_tx) ((_tx) == &(_tx)->state->txa)
> >
> >  enum adv748x_hdmi_pads {
> >  	ADV748X_HDMI_SINK,
> > @@ -400,8 +401,7 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
> >  int adv748x_register_subdevs(struct adv748x_state *state,
> >  			     struct v4l2_device *v4l2_dev);
> >
> > -int adv748x_txa_power(struct adv748x_state *state, bool on);
> > -int adv748x_txb_power(struct adv748x_state *state, bool on);
> > +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on);
> >
> >  int adv748x_afe_init(struct adv748x_afe *afe);
> >  void adv748x_afe_cleanup(struct adv748x_afe *afe);
> >
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]