From: Nikita Gerasimov <nikitych@yandex.ru>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Antti Palosaari <crope@iki.fi>,
linux-media@vger.kernel.org
Subject: [PATCH] media: rtl28xxu: add support for Sony CXD2837ER slave demod
Date: Thu, 27 Sep 2018 00:44:45 +0300 [thread overview]
Message-ID: <20180926214445.GA1344@NMT> (raw)
Since 2018 some new revisions of RTL2832P based devices having
Sony CXD2837ER as a slave demodulator instead of Panasonic MN88473.
CXD2837ER handled in DVB_CXD2841ER module but it's has a lack of control.
So slave demod has to be reseted by GPIO0 before detecting to woke up
CXD2837ER.
Signed-off-by: Nikita Gerasimov <nikitych@yandex.ru>
---
drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 40 +++++++++++++++++++++++--
drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 4 ++-
3 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index df4412245a8a..511e3f270308 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -133,6 +133,7 @@ config DVB_USB_RTL28XXU
depends on DVB_USB_V2 && I2C_MUX
select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MN88473 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
select DVB_RTL2830
select DVB_RTL2832
select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index a970224a94bd..917129404668 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -384,6 +384,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_mn88473 = {0xff38, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_cxd2837er = {0xfdd8, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_si2157 = {0x00c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_si2168 = {0x00c8, CMD_I2C_RD, 1, buf};
@@ -540,7 +541,18 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
/* probe slave demod */
if (dev->tuner == TUNER_RTL2832_R828D) {
- /* power on MN88472 demod on GPIO0 */
+ /* power off slave demod on GPIO0 to reset CXD2837ER */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x00, 0x01);
+ if (ret)
+ goto err;
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x00, 0x01);
+ if (ret)
+ goto err;
+
+ msleep(50);
+
+ /* power on slave demod on GPIO0 */
ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01);
if (ret)
goto err;
@@ -553,7 +565,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
if (ret)
goto err;
- /* check MN88472 answers */
+ /* check slave answers */
ret = rtl28xxu_ctrl_msg(d, &req_mn88472);
if (ret == 0 && buf[0] == 0x02) {
dev_dbg(&d->intf->dev, "MN88472 found\n");
@@ -567,6 +579,13 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
dev->slave_demod = SLAVE_DEMOD_MN88473;
goto demod_found;
}
+
+ ret = rtl28xxu_ctrl_msg(d, &req_cxd2837er);
+ if (ret == 0 && buf[0] == 0xb1) {
+ dev_dbg(&d->intf->dev, "CXD2837ER found\n");
+ dev->slave_demod = SLAVE_DEMOD_CXD2837ER;
+ goto demod_found;
+ }
}
if (dev->tuner == TUNER_RTL2832_SI2157) {
/* check Si2168 ID register; reg=c8 val=80 */
@@ -989,6 +1008,23 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
}
dev->i2c_client_slave_demod = client;
+ } else if (dev->slave_demod == SLAVE_DEMOD_CXD2837ER) {
+ struct cxd2841er_config cxd2837er_config = {};
+
+ cxd2837er_config.i2c_addr = 0xd8;
+ cxd2837er_config.xtal = SONY_XTAL_20500;
+ cxd2837er_config.flags = (CXD2841ER_AUTO_IFHZ |
+ CXD2841ER_NO_AGCNEG | CXD2841ER_TSBITS |
+ CXD2841ER_EARLY_TUNE | CXD2841ER_TS_SERIAL);
+ adap->fe[1] = dvb_attach(cxd2841er_attach_t_c,
+ &cxd2837er_config,
+ &d->i2c_adap);
+ if (!adap->fe[1]) {
+ dev->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+ adap->fe[1]->id = 1;
+ dev->i2c_client_slave_demod = NULL;
} else {
struct si2168_config si2168_config = {};
struct i2c_adapter *adapter;
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
index 138062960a73..197f4e339605 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -31,6 +31,7 @@
#include "rtl2832_sdr.h"
#include "mn88472.h"
#include "mn88473.h"
+#include "cxd2841er.h"
#include "qt1010.h"
#include "mt2060.h"
@@ -87,7 +88,8 @@ struct rtl28xxu_dev {
#define SLAVE_DEMOD_MN88472 1
#define SLAVE_DEMOD_MN88473 2
#define SLAVE_DEMOD_SI2168 3
- unsigned int slave_demod:2;
+ #define SLAVE_DEMOD_CXD2837ER 4
+ unsigned int slave_demod:3;
union {
struct rtl2830_platform_data rtl2830_platform_data;
struct rtl2832_platform_data rtl2832_platform_data;
--
2.17.1
reply other threads:[~2018-09-27 4:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926214445.GA1344@NMT \
--to=nikitych@yandex.ru \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox