public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: jacopo mondi <jacopo@jmondi.org>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: "Kieran Bingham" <kieran.bingham@ideasonboard.com>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: Re: [PATCH v2 5/5] i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter
Date: Fri, 5 Oct 2018 12:46:15 +0200	[thread overview]
Message-ID: <20181005104615.GP31281@w540> (raw)
In-Reply-To: <20181004204138.2784-6-niklas.soderlund@ragnatech.se>

[-- Attachment #1: Type: text/plain, Size: 7350 bytes --]

Hi Niklas,

On Thu, Oct 04, 2018 at 10:41:38PM +0200, Niklas Söderlund wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
> The driver fixed the TXA CSI-2 transmitter in 4-lane mode while it could
> operate using 1-, 2- and 4-lanes. Update the driver to support all modes
> the hardware does.
>
> The driver make use of large tables of static register/value writes when
> powering up/down the TXA and TXB transmitters which include the write to
> the NUM_LANES register. By converting the tables into functions and
> using parameters the power up/down functions for TXA and TXB power
> up/down can be merged and used for both transmitters.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
> ---
> * Changes since v1
> - Convert tables of register/value writes into functions instead of
>   intercepting and modifying the writes to the NUM_LANES register.
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 132 ++++++++++++-----------
>  1 file changed, 67 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 3836dd3025d6ffb7..fe29781368a3a6b6 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -125,6 +125,16 @@ int adv748x_write(struct adv748x_state *state, u8 page, u8 reg, u8 value)
>  	return regmap_write(state->regmap[page], reg, value);
>  }
>
> +static int adv748x_write_check(struct adv748x_state *state, u8 page, u8 reg,
> +			       u8 value, int *error)

Am I wrong or the return error is ignored and could be dropped?

> +{
> +	if (*error)
> +		return *error;
> +
> +	*error = adv748x_write(state, page, reg, value);
> +	return *error;
> +}
> +
>  /* adv748x_write_block(): Write raw data with a maximum of I2C_SMBUS_BLOCK_MAX
>   * size to one or more registers.
>   *
> @@ -231,69 +241,63 @@ static int adv748x_write_regs(struct adv748x_state *state,
>   * TXA and TXB
>   */
>
> -static const struct adv748x_reg_value adv748x_power_up_txa_4lane[] = {
> -
> -	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
> -	{ADV748X_PAGE_TXA, 0x00, 0xa4},	/* Set Auto DPHY Timing */
> -
> -	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXA, 0x00, 0x24 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXA, 0x31, 0x80},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_down_txa_4lane[] = {
> -
> -	{ADV748X_PAGE_TXA, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x1e, 0x00},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXA, 0x00, 0x84},	/* Enable 4-lane MIPI */
> -	{ADV748X_PAGE_TXA, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_TXA, 0xc1, 0x3b},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_up_txb_1lane[] = {
> -
> -	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
> -	{ADV748X_PAGE_TXB, 0x00, 0xa1},	/* Set Auto DPHY Timing */
> -
> -	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x1e, 0x40},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> -	{ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0xc1, 0x2b},	/* ADI Required Write */
> -	{ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
> -	{ADV748X_PAGE_TXB, 0x31, 0x80},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> -
> -static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
> -
> -	{ADV748X_PAGE_TXB, 0x31, 0x82},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x1e, 0x00},	/* ADI Required Write */
> -	{ADV748X_PAGE_TXB, 0x00, 0x81},	/* Enable 1-lane MIPI */
> -	{ADV748X_PAGE_TXB, 0xda, 0x01},	/* i2c_mipi_pll_en - 1'b1 */
> -	{ADV748X_PAGE_TXB, 0xc1, 0x3b},	/* ADI Required Write */
> -
> -	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> -};
> +static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
> +{
> +	struct adv748x_state *state = tx->state;
> +	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> +	int ret = 0;
> +
> +	/* Enable 4-lane MIPI */
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +
> +	/* Set Auto DPHY Timing */
> +	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
> +
> +	/* ADI Required Writes*/
> +	adv748x_write_check(state, page, 0x31, 0x82, &ret);
> +	adv748x_write_check(state, page, 0x1e, 0x40, &ret);
> +
> +	/* i2c_mipi_pll_en - 1'b1 */
> +	adv748x_write_check(state, page, 0xda, 0x01, &ret);
> +	usleep_range(2000, 2500);
> +
> +	/* Power-up CSI-TX */
> +	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
> +	usleep_range(1000, 1500);
> +
> +	/* ADI Required Writes*/
> +	adv748x_write_check(state, page, 0xc1, 0x2b, &ret);
> +	usleep_range(1000, 1500);
> +	adv748x_write_check(state, page, 0x31, 0x80, &ret);
> +
> +	return ret;
> +}
> +
> +static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
> +{
> +	struct adv748x_state *state = tx->state;
> +	u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
> +	int ret = 0;
> +
> +	/* ADI Required Writes */
> +	adv748x_write_check(state, page, 0x31, 0x82, &ret);
> +	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
> +
> +	/* Enable 4-lane MIPI */
> +	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
> +
> +	/* i2c_mipi_pll_en - 1'b1 */
> +	adv748x_write_check(state, page, 0xda, 0x01, &ret);
> +
> +	/* ADI Required Write */
> +	adv748x_write_check(state, page, 0xc1, 0x3b, &ret);
> +
> +	return ret;
> +}

This one looks good to me

>
>  int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
>  {
> -	struct adv748x_state *state = tx->state;
> -	const struct adv748x_reg_value *reglist;
> -	int val;
> +	int val, ret;
>
>  	if (!is_tx_enabled(tx))
>  		return 0;
> @@ -311,13 +315,11 @@ int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
>  			"Enabling with unknown bit set");
>
>  	if (on)
> -		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
> -				       adv748x_power_up_txb_1lane;
> +		ret = adv748x_power_up_tx(tx);
>  	else
> -		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
> -				       adv748x_power_down_txb_1lane;
> +		ret = adv748x_power_down_tx(tx);
>
> -	return adv748x_write_regs(state, reglist);
> +	return ret;

As Laurent suggested, or even
        return on ? adv748x_power_up_tx(tx) : adv748x_power_down_tx(tx);

Thanks
   j

>  }
>
>  /* -----------------------------------------------------------------------------
> --
> 2.19.0
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  parent reply	other threads:[~2018-10-05 17:44 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-04 20:41 [PATCH v2 0/5] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode Niklas Söderlund
2018-10-04 20:41 ` [PATCH v2 1/5] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints Niklas Söderlund
2018-10-04 21:42   ` Laurent Pinchart
2018-10-04 22:00     ` Laurent Pinchart
2018-10-05  8:49       ` jacopo mondi
2018-10-05 10:02         ` Laurent Pinchart
2018-11-02 10:34           ` Niklas Söderlund
2018-11-02 10:57             ` Kieran Bingham
2018-10-04 20:41 ` [PATCH v2 2/5] i2c: adv748x: reorder register writes for CSI-2 transmitters initialization Niklas Söderlund
2018-10-04 22:36   ` Laurent Pinchart
2018-11-02 10:38     ` Niklas Söderlund
2018-11-02 11:43       ` Laurent Pinchart
2018-11-02 15:40         ` Niklas Söderlund
2018-10-04 20:41 ` [PATCH v2 3/5] i2c: adv748x: reuse power up sequence when initializing CSI-2 Niklas Söderlund
2018-10-04 21:58   ` Laurent Pinchart
2018-10-04 20:41 ` [PATCH v2 4/5] i2c: adv748x: store number of CSI-2 lanes described in device tree Niklas Söderlund
2018-10-04 22:01   ` Laurent Pinchart
2018-10-04 20:41 ` [PATCH v2 5/5] i2c: adv748x: configure number of lanes used for TXA CSI-2 transmitter Niklas Söderlund
2018-10-04 22:08   ` Laurent Pinchart
2018-10-05 10:46   ` jacopo mondi [this message]
2018-11-02 10:44     ` Niklas Söderlund
2018-11-02 11:04       ` jacopo mondi
2018-11-02 11:46         ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181005104615.GP31281@w540 \
    --to=jacopo@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox