From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.bootlin.com ([62.4.15.54]:51170 "EHLO mail.bootlin.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1733039AbeKMXBu (ORCPT ); Tue, 13 Nov 2018 18:01:50 -0500 From: Maxime Ripard To: Mauro Carvalho Chehab Cc: Laurent Pinchart , linux-media@vger.kernel.org, Thomas Petazzoni , Mylene Josserand , Hans Verkuil , Sakari Ailus , Hugues Fruchet , Loic Poulain , Samuel Bobrowicz , Steve Longerbeam , Daniel Mack , Jacopo Mondi , Maxime Ripard Subject: [PATCH v5 03/11] media: ov5640: Remove redundant defines Date: Tue, 13 Nov 2018 14:03:17 +0100 Message-Id: <20181113130325.28975-4-maxime.ripard@bootlin.com> In-Reply-To: <20181113130325.28975-1-maxime.ripard@bootlin.com> References: <20181113130325.28975-1-maxime.ripard@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT defines represent exactly the same setup, and are at the same value, than the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and OV5640_SCLK_ROOT_DIV. Remove them. Signed-off-by: Maxime Ripard --- drivers/media/i2c/ov5640.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 584e01ea765b..1b295d07aa15 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -94,9 +94,6 @@ #define OV5640_REG_SDE_CTRL5 0x5585 #define OV5640_REG_AVG_READOUT 0x56a1 -#define OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT 1 -#define OV5640_SCLK_ROOT_DIVIDER_DEFAULT 2 - enum ov5640_mode_id { OV5640_MODE_QCIF_176_144 = 0, OV5640_MODE_QVGA_320_240, @@ -2086,8 +2083,8 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor) sensor->last_mode = &ov5640_mode_init_data; ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f, - (ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) | - ilog2(OV5640_SCLK_ROOT_DIVIDER_DEFAULT)); + (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) | + ilog2(OV5640_SCLK_ROOT_DIV)); if (ret) return ret; -- 2.19.1