[PATCH 0/2] sony-cxd2880: add optional vcc regulator

[PATCH 0/2] sony-cxd2880: add optional vcc regulator

[Neil Armstrong]

This patchset adds an optional VCC regulator to the bindings and driver to
make sure power is enabled to the module before starting attaching to
the device.

Neil Armstrong (2):
  media: cxd2880-spi: Add optional vcc regulator
  media: sony-cxd2880: add optional vcc regulator to bindings

 .../devicetree/bindings/media/spi/sony-cxd2880.txt       |  4 ++++
 drivers/media/spi/cxd2880-spi.c                          | 16 ++++++++++++++++
 2 files changed, 20 insertions(+)

-- 
2.7.4

[PATCH 1/2] media: cxd2880-spi: Add optional vcc regulator

[Neil Armstrong]

This patchset adds an optional VCC regulator to the driver probe function to
make sure power is enabled to the module before starting attaching to
the device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/media/spi/cxd2880-spi.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/media/spi/cxd2880-spi.c b/drivers/media/spi/cxd2880-spi.c
index c437309..d5c433e 100644
--- a/drivers/media/spi/cxd2880-spi.c
+++ b/drivers/media/spi/cxd2880-spi.c
@@ -10,6 +10,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
 
 #include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
 #include <linux/ktime.h>
 
 #include <media/dvb_demux.h>
@@ -51,6 +52,7 @@ struct cxd2880_dvb_spi {
 	struct mutex spi_mutex; /* For SPI access exclusive control */
 	int feed_count;
 	int all_pid_feed_count;
+	struct regulator *vcc_supply;
 	u8 *ts_buf;
 	struct cxd2880_pid_filter_config filter_config;
 };
@@ -518,6 +520,17 @@ cxd2880_spi_probe(struct spi_device *spi)
 	if (!dvb_spi)
 		return -ENOMEM;
 
+	dvb_spi->vcc_supply = devm_regulator_get_optional(&spi->dev, "vcc");
+	if (IS_ERR(dvb_spi->vcc_supply)) {
+		if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dvb_spi->vcc_supply = NULL;
+	} else {
+		ret = regulator_enable(dvb_spi->vcc_supply);
+		if (ret)
+			return ret;
+	}
+
 	dvb_spi->spi = spi;
 	mutex_init(&dvb_spi->spi_mutex);
 	dev_set_drvdata(&spi->dev, dvb_spi);
@@ -631,6 +644,9 @@ cxd2880_spi_remove(struct spi_device *spi)
 	dvb_frontend_detach(&dvb_spi->dvb_fe);
 	dvb_unregister_adapter(&dvb_spi->adapter);
 
+	if (dvb_spi->vcc_supply)
+		regulator_disable(dvb_spi->vcc_supply);
+
 	kfree(dvb_spi);
 	pr_info("cxd2880_spi remove ok.\n");
 
-- 
2.7.4

[PATCH 2/2] media: sony-cxd2880: add optional vcc regulator to bindings

[Neil Armstrong]

This patchset adds an optional VCC regulator to the bindings of the Sony
CXD2880 DVB-T2/T tuner + demodulator adapter.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
index fc5aa26..98a72c0 100644
--- a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
+++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
@@ -5,6 +5,10 @@ Required properties:
 - reg: SPI chip select number for the device.
 - spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz).
 
+Optional properties:
+- vcc-supply: Optional phandle to the vcc regulator to power the adapter,
+  as described in the file ../regulator/regulator.txt
+
 Example:
 
 cxd2880@0 {
-- 
2.7.4

Re: [PATCH 2/2] media: sony-cxd2880: add optional vcc regulator to bindings

[Rob Herring]

On Thu,  8 Nov 2018 13:50:10 +0100, Neil Armstrong wrote:
> This patchset adds an optional VCC regulator to the bindings of the Sony
> CXD2880 DVB-T2/T tuner + demodulator adapter.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 0/2] sony-cxd2880: add optional vcc regulator

[Frank Rowand]

Hi Neil,

On 11/8/18 4:50 AM, Neil Armstrong wrote:
> This patchset adds an optional VCC regulator to the bindings and driver to
> make sure power is enabled to the module before starting attaching to
> the device.
> 
> Neil Armstrong (2):
>   media: cxd2880-spi: Add optional vcc regulator
>   media: sony-cxd2880: add optional vcc regulator to bindings
> 
>  .../devicetree/bindings/media/spi/sony-cxd2880.txt       |  4 ++++
>  drivers/media/spi/cxd2880-spi.c                          | 16 ++++++++++++++++
>  2 files changed, 20 insertions(+)
> 

Please see Documentation/devicetree/bindings/submitting-patches.txt
for some helpful information about submitting a series that includes
a bindings patch.

You will want to add 'dt-bindings:' into the subject line, along with the
current 'media:'.  And getmaintainer will give you Rob's and Mark's
emails.

Thanks,

Frank

Re: [PATCH 0/2] sony-cxd2880: add optional vcc regulator

[Neil Armstrong]

Hi Frank,

On 09/11/2018 03:22, Frank Rowand wrote:
> Hi Neil,
> 
> On 11/8/18 4:50 AM, Neil Armstrong wrote:
>> This patchset adds an optional VCC regulator to the bindings and driver to
>> make sure power is enabled to the module before starting attaching to
>> the device.
>>
>> Neil Armstrong (2):
>>   media: cxd2880-spi: Add optional vcc regulator
>>   media: sony-cxd2880: add optional vcc regulator to bindings
>>
>>  .../devicetree/bindings/media/spi/sony-cxd2880.txt       |  4 ++++
>>  drivers/media/spi/cxd2880-spi.c                          | 16 ++++++++++++++++
>>  2 files changed, 20 insertions(+)
>>
> 
> Please see Documentation/devicetree/bindings/submitting-patches.txt
> for some helpful information about submitting a series that includes
> a bindings patch.
> 
> You will want to add 'dt-bindings:' into the subject line, along with the
> current 'media:'.  And getmaintainer will give you Rob's and Mark's
> emails.

I'll re-spin with dt-bindings, but some maintainers don't want or don't care,
so it's always a wild guess at some point !

> 
> Thanks,
> 
> Frank
> 

Neil

RE: [PATCH 0/2] sony-cxd2880: add optional vcc regulator

[Yasunari.Takiguchi]

Hi Neil,

I am not familiar to this vcc function 
but I check this compile is ok.

Acked-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>

> -----Original Message-----
> From: Neil Armstrong [mailto:narmstrong@baylibre.com]
> Sent: Thursday, November 8, 2018 9:50 PM
> To: Takiguchi, Yasunari (SSS)
> Cc: Neil Armstrong; mchehab@kernel.org; linux-media@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: [PATCH 0/2] sony-cxd2880: add optional vcc regulator
> 
> This patchset adds an optional VCC regulator to the bindings and driver
> to
> make sure power is enabled to the module before starting attaching to
> the device.
> 
> Neil Armstrong (2):
>   media: cxd2880-spi: Add optional vcc regulator
>   media: sony-cxd2880: add optional vcc regulator to bindings
> 
>  .../devicetree/bindings/media/spi/sony-cxd2880.txt       |  4 ++++
>  drivers/media/spi/cxd2880-spi.c                          | 16
> ++++++++++++++++
>  2 files changed, 20 insertions(+)
> 
> --
> 2.7.4