[DO NOT MERGE] [PATCH v8 5/5] arm64: dts: allwinner: bananapi-m64: Add HDF5640 camera module

Jagan Teki
2019-01-28T08:59:41Z

Bananapi M64 comes with an optional sensor based on the ov5640,
add support for it with below pin information.

- PE13, PE12 via i2c-gpio bitbanging
- CLK_CSI_MCLK as external clock
- PE1 as external clock pin muxing
- DLDO3 as AVDD supply
- ALDO1 as DOVDD supply
- ELDO3 as DVDD supply
- PE16 gpio for reset pin
- PE17 gpio for powerdown pin

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 9d0afd7d50ec..c99f66271287 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,41 @@
stdout-path = "serial0:115200n8";
};

+ i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* CSI0-SDA: PE13 */
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* CSI0-SCK: PE12 */
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DOVDD-supply = <&reg_aldo1>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* CSI0-RST: PE16 */
+ powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* CSI0-PWDN: PE17 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -108,6 +143,24 @@
status = "okay";
};

+&csi {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
&dai {
status = "okay";
};
@@ -298,6 +351,12 @@
regulator-name = "vcc-wifi";
};

+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
&reg_dldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -315,6 +374,12 @@
regulator-name = "cpvdd";
};

+&reg_eldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "dvdd-csi";
+};
+
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
--
2.18.0.321.gffc6fa0e3