public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: linux-media@vger.kernel.org
Cc: Tim Harvey <tharvey@gateworks.com>,
	Steve Longerbeam <slongerbeam@gmail.com>
Subject: [PATCH v6 0/7] media: imx: Add support for BT.709 encoding
Date: Thu,  7 Mar 2019 15:33:49 -0800	[thread overview]
Message-ID: <20190307233356.23748-1-slongerbeam@gmail.com> (raw)

This patchset adds support for the BT.709 encoding and inverse encoding
matrices to the ipu_ic task init functions. The imx-media driver can
now support both BT.601 and BT.709 encoding.

History:
v6:
- tweak some of the coefficients slightly, they were not getting
  rounded correctly.
- move the introduction of calc_csc_coeffs() to an earlier patch for
  easier patch readability.

v5:
- the hard-coded encode coefficients now convert only between
  full-range quantization. A new function is added to transform the
  coefficients to limited-range at input or output.
- add a bug fix patch for saturation bit in TPMEM register.
- add a patch to fully describe input and output colorspace to
  the IC task init functions.
- add imx_media_try_colorimetry(), called at all sink/source pad try_fmt.

v4:
- fix a compile error in init_csc(), reported by Tim Harvey.

v3:
- fix some inconsistent From: and Signed-off-by:'s.
  No functional changes.

v2:
- rename ic_csc_rgb2rgb matrix to ic_csc_identity.
- only return "Unsupported YCbCr encoding" error if inf != outf,
  since if inf == outf, the identity matrix can be used. Reported
  by Tim Harvey.
- move ic_route check above default colorimetry checks, and fill default
  colorspace for ic_route, otherwise it's not possible to set BT.709
  encoding for ic routes.


Steve Longerbeam (7):
  gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM
  gpu: ipu-v3: ipu-ic: Fix BT.601 coefficients
  gpu: ipu-v3: ipu-ic: Fully describe colorspace conversions
  gpu: ipu-v3: ipu-ic: Add support for Rec.709 encoding
  gpu: ipu-v3: ipu-ic: Add support for limited range encoding
  media: imx: Try colorimetry at both sink and source pads
  media: imx: Allow BT.709 encoding for IC routes

 drivers/gpu/ipu-v3/ipu-ic.c                 | 487 +++++++++++++++++---
 drivers/gpu/ipu-v3/ipu-image-convert.c      |  27 +-
 drivers/staging/media/imx/imx-ic-prp.c      |   6 +-
 drivers/staging/media/imx/imx-ic-prpencvf.c |  30 +-
 drivers/staging/media/imx/imx-media-csi.c   |  19 +-
 drivers/staging/media/imx/imx-media-utils.c |  70 +--
 drivers/staging/media/imx/imx-media-vdic.c  |   5 +-
 drivers/staging/media/imx/imx-media.h       |   5 +-
 drivers/staging/media/imx/imx7-media-csi.c  |   8 +-
 include/video/imx-ipu-v3.h                  |  37 +-
 10 files changed, 547 insertions(+), 147 deletions(-)

-- 
2.17.1


             reply	other threads:[~2019-03-07 23:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-07 23:33 Steve Longerbeam [this message]
2019-03-07 23:33 ` [PATCH v6 1/7] gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM Steve Longerbeam
2019-03-08 10:24   ` Philipp Zabel
2019-03-07 23:33 ` [PATCH v6 2/7] gpu: ipu-v3: ipu-ic: Fix BT.601 coefficients Steve Longerbeam
2019-03-08 10:23   ` Philipp Zabel
2019-03-09  1:00     ` Steve Longerbeam
2019-03-07 23:33 ` [PATCH v6 3/7] gpu: ipu-v3: ipu-ic: Fully describe colorspace conversions Steve Longerbeam
2019-03-08 11:46   ` Philipp Zabel
2019-03-09  1:16     ` Steve Longerbeam
2019-03-07 23:33 ` [PATCH v6 4/7] gpu: ipu-v3: ipu-ic: Add support for Rec.709 encoding Steve Longerbeam
2019-03-07 23:33 ` [PATCH v6 5/7] gpu: ipu-v3: ipu-ic: Add support for limited range encoding Steve Longerbeam
2019-03-08 11:57   ` Philipp Zabel
2019-03-09  1:26     ` Steve Longerbeam
2019-03-07 23:33 ` [PATCH v6 6/7] media: imx: Try colorimetry at both sink and source pads Steve Longerbeam
2019-03-07 23:33 ` [PATCH v6 7/7] media: imx: Allow BT.709 encoding for IC routes Steve Longerbeam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190307233356.23748-1-slongerbeam@gmail.com \
    --to=slongerbeam@gmail.com \
    --cc=linux-media@vger.kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox