From: Johan Korsnes <johan.korsnes@gmail.com>
To: linux-media@vger.kernel.org
Cc: Johan Korsnes <johan.korsnes@gmail.com>
Subject: [PATCH v2 5/9] media: vivid: add HDMI (dis)connect TX emulation
Date: Sun, 16 Jun 2019 11:22:14 -0700 [thread overview]
Message-ID: <20190616182218.37726-6-johan.korsnes@gmail.com> (raw)
In-Reply-To: <20190616182218.37726-1-johan.korsnes@gmail.com>
Adds the following bitmask controls:
-V4L2_CID_DV_TX_EDID_PRESENT
-V4L2_CID_DV_TX_HOTPLUG
-V4L2_CID_DV_TX_RXSENSE
The bitmasks are all set based on the custom vivid DISPLAY_PRESENT
control. This also removes 2/2 v4l2-compliance warnings for vivid
output device.
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
---
drivers/media/platform/vivid/vivid-core.h | 3 +++
drivers/media/platform/vivid/vivid-ctrls.c | 25 +++++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h
index 1d04b7209f2b..b7307cbba2a5 100644
--- a/drivers/media/platform/vivid/vivid-core.h
+++ b/drivers/media/platform/vivid/vivid-core.h
@@ -248,6 +248,9 @@ struct vivid_dev {
struct v4l2_ctrl *ctrl_has_scaler_out;
struct v4l2_ctrl *ctrl_tx_mode;
struct v4l2_ctrl *ctrl_tx_rgb_range;
+ struct v4l2_ctrl *ctrl_tx_edid_present;
+ struct v4l2_ctrl *ctrl_tx_hotplug;
+ struct v4l2_ctrl *ctrl_tx_rxsense;
struct v4l2_ctrl *radio_tx_rds_pi;
struct v4l2_ctrl *radio_tx_rds_pty;
diff --git a/drivers/media/platform/vivid/vivid-ctrls.c b/drivers/media/platform/vivid/vivid-ctrls.c
index 67a330f15552..5cb7232a8278 100644
--- a/drivers/media/platform/vivid/vivid-ctrls.c
+++ b/drivers/media/platform/vivid/vivid-ctrls.c
@@ -912,6 +912,8 @@ static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_out);
struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
+ u32 display_present = 0;
+ unsigned i, j;
switch (ctrl->id) {
case VIVID_CID_HAS_CROP_OUT:
@@ -950,6 +952,15 @@ static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
break;
dev->display_present[dev->output] = ctrl->val;
+
+ for (i = 0, j = 0; i < dev->num_outputs; i++)
+ if (dev->output_type[i] == HDMI)
+ display_present |=
+ dev->display_present[i] << j++;
+
+ __v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+ __v4l2_ctrl_s_ctrl(dev->ctrl_tx_rxsense, display_present);
+ __v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
break;
}
return 0;
@@ -1592,7 +1603,7 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
0, V4L2_DV_RGB_RANGE_AUTO);
}
- if (has_hdmi && dev->has_vid_out) {
+ if (dev->num_hdmi_outputs) {
/*
* We aren't doing anything with this at the moment, but
* HDMI outputs typically have this controls.
@@ -1605,6 +1616,18 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap,
0, V4L2_DV_TX_MODE_HDMI);
dev->ctrl_display_present = v4l2_ctrl_new_custom(hdl_vid_out,
&vivid_ctrl_display_present, NULL);
+ dev->ctrl_tx_hotplug = v4l2_ctrl_new_std(hdl_vid_out,
+ NULL, V4L2_CID_DV_TX_HOTPLUG, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1);
+ dev->ctrl_tx_rxsense = v4l2_ctrl_new_std(hdl_vid_out,
+ NULL, V4L2_CID_DV_TX_RXSENSE, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1);
+ dev->ctrl_tx_edid_present = v4l2_ctrl_new_std(hdl_vid_out,
+ NULL, V4L2_CID_DV_TX_EDID_PRESENT, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1, 0,
+ (2 << (dev->num_hdmi_outputs - 1)) - 1);
}
if ((dev->has_vid_cap && dev->has_vid_out) ||
(dev->has_vbi_cap && dev->has_vbi_out))
--
2.19.1
next prev parent reply other threads:[~2019-06-16 18:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-16 18:22 [PATCH v2 0/9] media: vivid: add HDMI (dis)connect emulation Johan Korsnes
2019-06-16 18:22 ` [PATCH v2 1/9] media: vivid: make input dv_timings per-input Johan Korsnes
2019-06-16 18:22 ` [PATCH v2 2/9] media: vivid: make input std_signal per-input Johan Korsnes
2019-06-17 9:59 ` Hans Verkuil
2019-06-16 18:22 ` [PATCH v2 3/9] media: vivid: add display present control Johan Korsnes
2019-06-16 18:22 ` [PATCH v2 4/9] media: vivid: add number of HDMI ports to device state Johan Korsnes
2019-06-16 18:22 ` Johan Korsnes [this message]
2019-06-16 18:22 ` [PATCH v2 6/9] media: vivid: add HDMI (dis)connect RX emulation Johan Korsnes
2019-06-16 18:22 ` [PATCH v2 7/9] media: vivid: reorder CEC allocation and control set-up Johan Korsnes
2019-06-17 9:57 ` Hans Verkuil
2019-06-16 18:22 ` [PATCH v2 8/9] media: vivid: add CEC support to display present ctrl Johan Korsnes
2019-06-17 9:59 ` Hans Verkuil
2019-06-16 18:22 ` [PATCH v2 9/9] media: vivid.rst: describe display present control Johan Korsnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190616182218.37726-6-johan.korsnes@gmail.com \
--to=johan.korsnes@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).