Re: [PATCH 3/3] drm/bridge/adv7511: enable CEC connector info

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

(And CC'ing Andrzej Hajda and Neil Armstrong as the new DRM bridge
maintainers, as well as Boris Brezillon, to make sure they're aware of
the problem)

I would really appreciate if we could delay merging this series and
other similar changes until we find a proper solution.

On Fri, Aug 23, 2019 at 09:58:47PM +0300, Laurent Pinchart wrote:
> Hi Hans,
> 
> Thank you for the patch.
> 
> On Fri, Aug 23, 2019 at 01:24:27PM +0200, Hans Verkuil wrote:
> > Set the connector info to help userspace associate the CEC adapter
> > with the HDMI connector.
> > 
> > This required that the cec initialization and unregistering the
> > CEC adapter takes place in the bridge attach and detach ops.
> > 
> > Tested on an R-Car Koelsch board.
> > 
> > Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> > Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511_cec.c |  7 ++++++-
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 22 ++++++++++----------
> >  2 files changed, 17 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> > index a20a45c0b353..accf5e232396 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> > @@ -302,6 +302,7 @@ static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
> >  
> >  int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >  {
> > +	struct cec_connector_info conn_info;
> >  	unsigned int offset = adv7511->type == ADV7533 ?
> >  						ADV7533_REG_CEC_OFFSET : 0;
> >  	int ret = adv7511_cec_parse_dt(dev, adv7511);
> > @@ -310,7 +311,8 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >  		goto err_cec_parse_dt;
> >  
> >  	adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
> > -		adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
> > +		adv7511, dev_name(dev),
> > +		CEC_CAP_DEFAULTS | CEC_CAP_CONNECTOR_INFO, ADV7511_MAX_ADDRS);
> >  	if (IS_ERR(adv7511->cec_adap)) {
> >  		ret = PTR_ERR(adv7511->cec_adap);
> >  		goto err_cec_alloc;
> > @@ -331,6 +333,9 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> >  		     ADV7511_REG_CEC_CLK_DIV + offset,
> >  		     ((adv7511->cec_clk_freq / 750000) - 1) << 2);
> >  
> > +	cec_fill_conn_info_from_drm(&conn_info, &adv7511->connector);
> > +	cec_s_conn_info(adv7511->cec_adap, &conn_info);
> 
> I'm painfully trying to decouple bridges and connectors, if we keep
> merging patches that go in the opposite direction, I'll never manage to
> complete this :-(
> 
> Bridges are moving to a model where they won't create connectors
> themselves, so any new access to drm_connector contained in a bridge
> structure is a no-go I'm afraid (I'm replying to this patch as I know
> this driver best, but this comment applies to the other two patches in
> the series as well).
> 
> Here's what I wrote in a private e-mail, regarding similar changes for
> the omapdrm driver.
> 
> --------
> Please have a look at "[PATCH 00/60] drm/omap: Replace custom display
> drivers with drm_bridge and drm_panel", available in a new version at
> 
> 	git://linuxtv.org/pinchartl/media.git omapdrm/bridge/devel
> 
> (I will post v2 soon)
> 
> The patches show the direction the omapdrm driver is taking. The goal is
> to decouple connectors from bridges, which I'm afraid will have an
> impact on associating drm_connector with a CEC adapter. This should be
> implemented through new drm_bridge operations, as bridges, when created,
> will not create drm_connector anymore.
> 
> I've solved a similar problem related to associating DRM connectors with
> an I2C adapter for DDC. Please see the drm_bridge_connector_init()
> function and how the DDC adapter is handled. Something similar could be
> done for CEC.
> --------
> 
> Since then v2 has been posted ("[PATCH v2 00/50] drm/omap: Replace
> custom display drivers with drm_bridge and drm_panel") and v3 is in
> preparation.
> 
> So, please, let's both go in the right direction and solve the problem
> properly for CEC.
> 
> > +
> >  	ret = cec_register_adapter(adv7511->cec_adap, dev);
> >  	if (ret)
> >  		goto err_cec_register;
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index f6d2681f6927..bbcb996c4d4f 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -881,14 +881,24 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> >  		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
> >  			     ADV7511_INT0_HPD);
> >  
> > +	if (!ret)
> > +		ret = adv7511_cec_init(&adv->i2c_main->dev, adv);
> >  	return ret;
> >  }
> >  
> > +static void adv7511_bridge_detach(struct drm_bridge *bridge)
> > +{
> > +	struct adv7511 *adv = bridge_to_adv7511(bridge);
> > +
> > +	cec_unregister_adapter(adv->cec_adap);
> > +}
> > +
> >  static const struct drm_bridge_funcs adv7511_bridge_funcs = {
> >  	.enable = adv7511_bridge_enable,
> >  	.disable = adv7511_bridge_disable,
> >  	.mode_set = adv7511_bridge_mode_set,
> >  	.attach = adv7511_bridge_attach,
> > +	.detach = adv7511_bridge_detach,
> >  };
> >  
> >  /* -----------------------------------------------------------------------------
> > @@ -1202,7 +1212,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >  						IRQF_ONESHOT, dev_name(dev),
> >  						adv7511);
> >  		if (ret)
> > -			goto err_unregister_cec;
> > +			goto err_i2c_unregister_packet;
> >  	}
> >  
> >  	adv7511_power_off(adv7511);
> > @@ -1212,10 +1222,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >  	if (adv7511->type == ADV7511)
> >  		adv7511_set_link_config(adv7511, &link_config);
> >  
> > -	ret = adv7511_cec_init(dev, adv7511);
> > -	if (ret)
> > -		goto err_unregister_cec;
> > -
> >  	adv7511->bridge.funcs = &adv7511_bridge_funcs;
> >  	adv7511->bridge.of_node = dev->of_node;
> >  
> > @@ -1224,10 +1230,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> >  	adv7511_audio_init(dev, adv7511);
> >  	return 0;
> >  
> > -err_unregister_cec:
> > -	i2c_unregister_device(adv7511->i2c_cec);
> > -	if (adv7511->cec_clk)
> > -		clk_disable_unprepare(adv7511->cec_clk);
> >  err_i2c_unregister_packet:
> >  	i2c_unregister_device(adv7511->i2c_packet);
> >  err_i2c_unregister_edid:
> > @@ -1254,8 +1256,6 @@ static int adv7511_remove(struct i2c_client *i2c)
> >  
> >  	adv7511_audio_exit(adv7511);
> >  
> > -	cec_unregister_adapter(adv7511->cec_adap);
> > -
> >  	i2c_unregister_device(adv7511->i2c_packet);
> >  	i2c_unregister_device(adv7511->i2c_edid);
> >  
> 
> -- 
> Regards,
> 
> Laurent Pinchart

-- 
Regards,

Laurent Pinchart