Re: [RFC PATCH V3 2/4] media: platform: Add Mediatek sensor interface driver KConfig

[Sakari Ailus <sakari.ailus@iki.fi>]

On Thu, Jun 06, 2019 at 06:00:31PM +0800, Louis Kuo wrote:
> This patch adds KConfig for sensor interface driver. Sensor interface
> driver
> is a MIPI-CSI2 host driver, namely, a HW camera interface controller.
> It support a widely adopted, simple, high-speed protocol primarily
> intended
> for point-to-point image and video transmission between cameras and host
> devices.
> 
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> ---
>  drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 drivers/media/platform/mtk-isp/Kconfig
> 
> diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig
> new file mode 100644
> index 0000000..bc7fd01
> --- /dev/null
> +++ b/drivers/media/platform/mtk-isp/Kconfig
> @@ -0,0 +1,17 @@
> +config MTK_SENINF
> +	bool "Mediatek mipi csi2 driver"
> +	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CAMERA_SUPPORT
> +	select V4L2_FWNODE
> +
> +	default n
> +	help
> +	    This driver provides a mipi-csi2 host driver used as a
> +	    interface to connect camera with Mediatek's
> +	    MT8183 SOCs. It is able to handle multiple cameras
> +	    at the same time.
> +
> +	    Choose y if you want to use Mediatek SoCs to create image
> +	    capture application such as video recording and still image
> +	    capture.

Rather than being a separate patch, this should go in with the driver.

The DT bindings should precede the driver, and you'll need a MAINTAINERS
entry for the driver, too.

-- 
Sakari Ailus