Re: [PATCH v4 01/11] dt-bindings: video-interfaces: Document 'location' property

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1816 bytes --]

On Mon 2019-10-07 18:29:03, Jacopo Mondi wrote:
> Add the 'location' device property, used to specify a device mounting
> position. The property is particularly meaningful for mobile devices
> with a well defined usage orientation.
> 
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
>  .../devicetree/bindings/media/video-interfaces.txt    | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
> index f884ada0bffc..1211bdf80722 100644
> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> @@ -89,6 +89,17 @@ Optional properties
>    but a number of degrees counter clockwise. Typical values are 0 and 180
>    (upside down).
>  
> +- location: The mount location of a device (typically an image sensor or a flash
> +  LED) expressed as a position relative to the usage orientation of the system
> +  where the device is installed on.
> +  Possible values are:
> +  0 - Front. The device is mounted on the front facing side of the system.
> +  For mobile devices such as smartphones, tablets and laptops the front side is
> +  the user facing side.
> +  1 - Back. The device is mounted on the back side of the system, which is
> +  defined as the opposite side of the front facing one.
> +  2 - External. The device is not attached directly to the system but is
> +  attached in a way that allows it to move freely.

I explained why this is not enough, and it did not change.

NAK.
									Pavel
									
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]