From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
To: linux-media@vger.kernel.org
Cc: dafna.hirschfeld@collabora.com, helen.koike@collabora.com,
ezequiel@collabora.com, hverkuil@xs4all.nl, kernel@collabora.com,
dafna3@gmail.com, sakari.ailus@linux.intel.com,
linux-rockchip@lists.infradead.org, mchehab@kernel.org,
laurent.pinchart@ideasonboard.com
Subject: [PATCH v2 2/2] media: staging: rkisp1: replace the call to v4l2_async_notifier_parse_fwnode_endpoints_by_port
Date: Thu, 12 Mar 2020 16:46:04 +0100 [thread overview]
Message-ID: <20200312154604.24996-3-dafna.hirschfeld@collabora.com> (raw)
In-Reply-To: <20200312154604.24996-1-dafna.hirschfeld@collabora.com>
don't call 'v4l2_async_notifier_parse_fwnode_endpoints_by_port'
in order to register async subdevices. Instead call
'v4l2_fwnode_endpoint_parse' to parse the remote endpoints
and then register each async subdev with
'v4l2_async_notifier_add_fwnode_remote_subdev'
Also remove the relevant item in the TODO file
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
drivers/staging/media/rkisp1/TODO | 3 -
drivers/staging/media/rkisp1/rkisp1-dev.c | 94 +++++++++++++----------
2 files changed, 55 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/media/rkisp1/TODO b/drivers/staging/media/rkisp1/TODO
index 0aa9877dd64a..1aa3bb9fd6cb 100644
--- a/drivers/staging/media/rkisp1/TODO
+++ b/drivers/staging/media/rkisp1/TODO
@@ -1,6 +1,3 @@
-* Don't use v4l2_async_notifier_parse_fwnode_endpoints_by_port().
-e.g. isp_parse_of_endpoints in drivers/media/platform/omap3isp/isp.c
-cio2_parse_firmware in drivers/media/pci/intel/ipu3/ipu3-cio2.c.
* Fix pad format size for statistics and parameters entities.
* Use threaded interrupt for rkisp1_stats_isr(), remove work queue.
* Fix checkpatch errors.
diff --git a/drivers/staging/media/rkisp1/rkisp1-dev.c b/drivers/staging/media/rkisp1/rkisp1-dev.c
index d2186856bb24..1035a39f3e49 100644
--- a/drivers/staging/media/rkisp1/rkisp1-dev.c
+++ b/drivers/staging/media/rkisp1/rkisp1-dev.c
@@ -233,35 +233,6 @@ static int rkisp1_subdev_notifier_complete(struct v4l2_async_notifier *notifier)
return 0;
}
-static int rkisp1_fwnode_parse(struct device *dev,
- struct v4l2_fwnode_endpoint *vep,
- struct v4l2_async_subdev *asd)
-{
- struct rkisp1_sensor_async *s_asd =
- container_of(asd, struct rkisp1_sensor_async, asd);
-
- if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
- dev_err(dev, "Only CSI2 bus type is currently supported\n");
- return -EINVAL;
- }
-
- if (vep->base.port != 0) {
- dev_err(dev, "The ISP has only port 0\n");
- return -EINVAL;
- }
-
- s_asd->mbus_type = vep->bus_type;
- s_asd->lanes = vep->bus.mipi_csi2.num_data_lanes;
-
- /* Parallel bus is currently not supported */
- s_asd->parallel_bus_flags = 0;
-
- if (s_asd->lanes < 1 || s_asd->lanes > 4)
- return -EINVAL;
-
- return 0;
-}
-
static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops = {
.bound = rkisp1_subdev_notifier_bound,
.unbind = rkisp1_subdev_notifier_unbind,
@@ -271,23 +242,68 @@ static const struct v4l2_async_notifier_operations rkisp1_subdev_notifier_ops =
static int rkisp1_subdev_notifier(struct rkisp1_device *rkisp1)
{
struct v4l2_async_notifier *ntf = &rkisp1->notifier;
- struct device *dev = rkisp1->dev;
+ int next_id = 0;
int ret;
v4l2_async_notifier_init(ntf);
- ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(dev, ntf,
- sizeof(struct rkisp1_sensor_async),
- 0, rkisp1_fwnode_parse);
- if (ret)
- return ret;
+ while (1) {
+ struct v4l2_fwnode_endpoint vep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
+ struct rkisp1_sensor_async *rk_asd = NULL;
+ struct fwnode_handle *ep;
- if (list_empty(&ntf->asd_list))
- return -ENODEV;
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(rkisp1->dev),
+ 0, next_id, FWNODE_GRAPH_ENDPOINT_NEXT);
- ntf->ops = &rkisp1_subdev_notifier_ops;
+ if (!ep)
+ break;
+
+ ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+ if (ret)
+ goto err_parse;
+
+ rk_asd = kzalloc(sizeof(*rk_asd), GFP_KERNEL);
+ if (!rk_asd) {
+ ret = -ENOMEM;
+ goto err_parse;
+ }
+
+ rk_asd->lanes = vep.bus.mipi_csi2.num_data_lanes;
+ rk_asd->mbus_type = vep.bus_type;
+
+ /* Parallel bus is currently not supported */
+ rk_asd->parallel_bus_flags = 0;
+ ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
+ &rk_asd->asd);
+ if (ret)
+ goto err_parse;
+
+ dev_dbg(rkisp1->dev, "registered ep id %d with %d lanes\n",
+ vep.base.id, rk_asd->lanes);
+
+ next_id = vep.base.id + 1;
+
+ fwnode_handle_put(ep);
- return v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
+ continue;
+err_parse:
+ fwnode_handle_put(ep);
+ kfree(rk_asd);
+ v4l2_async_notifier_cleanup(ntf);
+ return ret;
+ }
+
+ if (next_id == 0)
+ dev_warn(rkisp1->dev, "no remote subdevice found\n");
+ ntf->ops = &rkisp1_subdev_notifier_ops;
+ ret = v4l2_async_notifier_register(&rkisp1->v4l2_dev, ntf);
+ if (ret) {
+ v4l2_async_notifier_cleanup(ntf);
+ return ret;
+ }
+ return 0;
}
/* ----------------------------------------------------------------------------
--
2.17.1
next prev parent reply other threads:[~2020-03-12 15:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 15:46 [PATCH v2 0/2] fix fwnode API usage and remove v4l2_mbus_config field Dafna Hirschfeld
2020-03-12 15:46 ` [PATCH v2 1/2] media: staging: rkisp1: remove mbus field from rkisp1_sensor_async Dafna Hirschfeld
2020-03-17 12:52 ` Helen Koike
2020-03-12 15:46 ` Dafna Hirschfeld [this message]
2020-03-13 9:18 ` [PATCH v2 2/2] media: staging: rkisp1: replace the call to v4l2_async_notifier_parse_fwnode_endpoints_by_port Sakari Ailus
2020-03-13 14:06 ` Helen Koike
2020-03-13 15:23 ` Sakari Ailus
2020-03-17 13:12 ` Helen Koike
2020-03-17 13:20 ` Sakari Ailus
2020-03-17 18:12 ` Dafna Hirschfeld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312154604.24996-3-dafna.hirschfeld@collabora.com \
--to=dafna.hirschfeld@collabora.com \
--cc=dafna3@gmail.com \
--cc=ezequiel@collabora.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=kernel@collabora.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox