From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Jacopo Mondi <jacopo@jmondi.org>,
Maxime Ripard <mripard@kernel.org>
Subject: Re: [PATCH 1/1] Revert "media: dt-bindings: media: Use OF graph schema"
Date: Wed, 2 Dec 2020 20:18:09 +0200 [thread overview]
Message-ID: <20201202181809.GF13750@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20201202181432.17759-1-sakari.ailus@linux.intel.com>
Hi Sakari,
Thank you for the patch.
On Wed, Dec 02, 2020 at 08:14:32PM +0200, Sakari Ailus wrote:
> This reverts commit f61eb7bc9256aeb173d2d730f59cdd569d261c52.
>
> While aligning with the OF graph schema will be done for the media DT
> bindings, this patch got merged a little too hastily. Revert it for now.
>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> .../media/allwinner,sun4i-a10-csi.yaml | 1 -
> .../media/allwinner,sun6i-a31-csi.yaml | 1 -
> .../bindings/media/i2c/adv7180.yaml | 31 ++++++--
> .../bindings/media/i2c/adv7604.yaml | 32 ++++++--
> .../bindings/media/i2c/aptina,mt9v111.yaml | 2 +-
> .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 25 +++++-
> .../devicetree/bindings/media/i2c/imx219.yaml | 4 -
> .../bindings/media/i2c/maxim,max9286.yaml | 76 +++++++++++++++----
> .../devicetree/bindings/media/i2c/ov5647.yaml | 5 +-
> .../devicetree/bindings/media/i2c/ov8856.yaml | 5 +-
> .../bindings/media/i2c/ovti,ov772x.yaml | 1 -
> .../bindings/media/i2c/sony,imx214.yaml | 1 -
> .../bindings/media/i2c/sony,imx274.yaml | 3 +-
> .../bindings/media/marvell,mmp2-ccic.yaml | 1 -
> .../bindings/media/renesas,ceu.yaml | 1 -
> .../bindings/media/renesas,csi2.yaml | 36 +++++++--
> .../bindings/media/renesas,vin.yaml | 7 +-
> .../bindings/media/st,stm32-dcmi.yaml | 7 +-
> .../devicetree/bindings/media/ti,cal.yaml | 15 +++-
> .../bindings/media/xilinx/xlnx,csi2rxss.yaml | 21 ++++-
> 20 files changed, 214 insertions(+), 61 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> index 0205f7dd7fdb..09318830db47 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> @@ -70,7 +70,6 @@ properties:
> # See ./video-interfaces.txt for details
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> additionalProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> index 48d8f73ce7ab..1fd9b5532a21 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> @@ -43,7 +43,6 @@ properties:
> # See ./video-interfaces.txt for details
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
>
> properties:
> endpoint:
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> index 7f28954a4508..d8c54f9d9506 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> @@ -36,9 +36,17 @@ properties:
> maxItems: 1
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> -
> - ports: true
> + type: object
> + description:
> + A node containing a single endpoint as doucmented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> + ports:
> + type: object
> + description:
> + A node containing input and output port nodes with endpoint definitions
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
>
> additionalProperties: false
>
> @@ -72,19 +80,24 @@ allOf:
> then:
> properties:
> ports:
> - $ref: /schemas/graph.yaml#/properties/ports
> properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> port@3:
> + type: object
> description: Output port
>
> patternProperties:
> "^port@[0-2]$":
> + type: object
> description: Input port
>
> required:
> - port@3
>
> - unevaluatedProperties: false
> + additionalProperties: false
>
> required:
> - ports
> @@ -97,20 +110,24 @@ allOf:
> then:
> properties:
> ports:
> - $ref: /schemas/graph.yaml#/properties/ports
> properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> port@6:
> type: object
> description: Output port
>
> patternProperties:
> "^port@[0-5]$":
> + type: object
> description: Input port
>
> required:
> - port@6
>
> - unevaluatedProperties: false
> + additionalProperties: false
>
> required:
> - ports
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> index 81f17e719d87..3897af540ddd 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> @@ -64,12 +64,16 @@ properties:
> description:
> Select which input is selected after reset.
>
> - ports: true
> + ports:
> + type: object
> + description:
> + A node containing input and output port nodes with endpoint definitions
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
>
> required:
> - compatible
> - reg
> - - ports
>
> additionalProperties: false
>
> @@ -82,17 +86,25 @@ allOf:
> then:
> properties:
> ports:
> - $ref: /schemas/graph.yaml#/properties/ports
> properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> port@0:
> + type: object
> description: Input port
> port@1:
> + type: object
> description: Output port
>
> required:
> - port@1
>
> - unevaluatedProperties: false
> + additionalProperties: false
> +
> + required:
> + - ports
>
> - if:
> properties:
> @@ -102,19 +114,27 @@ allOf:
> then:
> properties:
> ports:
> - $ref: /schemas/graph.yaml#/properties/ports
> properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> port@2:
> + type: object
> description: Output port
>
> patternProperties:
> "^port@[0-1]$":
> + type: object
> description: Input port
>
> required:
> - port@2
>
> - unevaluatedProperties: false
> + additionalProperties: false
> +
> + required:
> + - ports
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> index 17ec4ab1dbd0..ff9546e95d05 100644
> --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> @@ -41,7 +41,7 @@ properties:
> maxItems: 1
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> + type: object
> description: |
> Output video port. See ../video-interfaces.txt.
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> index e0ea3acca89a..3dc06c628e64 100644
> --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> @@ -86,12 +86,33 @@ properties:
> maxItems: 3
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> - description:
> + type: object
> + additionalProperties: false
> + description: -|
> Connection to the remote GMSL endpoint are modelled using the OF graph
> bindings in accordance with the video interface bindings defined in
> Documentation/devicetree/bindings/media/video-interfaces.txt.
>
> + The device node contains a single "port" child node with a single
> + "endpoint" sub-device.
> +
> + properties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + remote-endpoint:
> + description: -|
> + phandle to the remote GMSL endpoint sub-node in the remote node
> + port.
> + maxItems: 1
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - endpoint
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> index bba42e015c98..dfc4d29a4f04 100644
> --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> @@ -47,8 +47,6 @@ properties:
> # See ../video-interfaces.txt for more details
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> -
> properties:
> endpoint:
> type: object
> @@ -76,8 +74,6 @@ properties:
> required:
> - link-frequencies
>
> - additionalProperties: false
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> index 2e89a5458afe..9ea827092fdd 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> @@ -53,25 +53,56 @@ properties:
>
> ports:
> type: object
> - $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + The connections to the MAX9286 GMSL and its endpoint nodes are modelled
> + using the OF graph bindings in accordance with the video interface
> + bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> + The following table lists the port number corresponding to each device
> + port.
> +
> + Port Description
> + ----------------------------------------
> + Port 0 GMSL Input 0
> + Port 1 GMSL Input 1
> + Port 2 GMSL Input 2
> + Port 3 GMSL Input 3
> + Port 4 CSI-2 Output
>
> properties:
> - port@0:
> - description: GMSL Input 0
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
>
> - port@1:
> - description: GMSL Input 1
> + port@[0-3]:
> + type: object
> + properties:
> + reg:
> + enum: [ 0, 1, 2, 3 ]
>
> - port@2:
> - description: GMSL Input 2
> + endpoint:
> + type: object
>
> - port@3:
> - description: GMSL Input 3
> + properties:
> + remote-endpoint:
> + description: |
> + phandle to the remote GMSL source endpoint subnode in the
> + remote node port.
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - reg
> + - endpoint
> +
> + additionalProperties: false
>
> port@4:
> type: object
> - description: CSI-2 Output
> -
> properties:
> reg:
> const: 4
> @@ -99,8 +130,6 @@ properties:
> required:
> - port@4
>
> - unevaluatedProperties: false
> -
> i2c-mux:
> type: object
> description: |
> @@ -155,8 +184,25 @@ properties:
> requirements of the currently connected remote device.
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> - description: Connection to the MAX9286 sink.
> + type: object
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint:
> + description: phandle to the MAX9286 sink endpoint.
> +
> + required:
> + - remote-endpoint
> +
> + additionalProperties: false
> +
> + required:
> + - endpoint
> +
> + additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> index cd5291602a70..280c62afae13 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> @@ -32,7 +32,10 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> + description: |-
> + Should contain one endpoint sub-node used to model connection to the
> + video receiver according to the specification defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
>
> properties:
> endpoint:
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> index 2611eb69b3b2..cde85553fd01 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> @@ -58,8 +58,11 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> additionalProperties: false
> + description:
> + A node containing an output port node with an endpoint definition
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
>
> properties:
> endpoint:
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> index 450e5bd64312..63b3779d7289 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> @@ -38,7 +38,6 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> description: |
> Video output port. See ../video-interfaces.txt.
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> index 884bd3527e0a..0f5e25fa4e9d 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> @@ -55,7 +55,6 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> description: |
> Video output port. See ../video-interfaces.txt.
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> index 90828020e42a..f697e1a20beb 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> @@ -44,7 +44,8 @@ properties:
> maxItems: 1
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> + type: object
> + description: Output video port. See ../video-interfaces.txt.
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> index 4832f55654cc..49bff738aca5 100644
> --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> @@ -25,7 +25,6 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> additionalProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> index 2d493d503d07..c7e1e4fe67e6 100644
> --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> @@ -35,7 +35,6 @@ properties:
>
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> additionalProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> index e34dfbef25a2..533c2f181db7 100644
> --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> @@ -47,7 +47,10 @@ properties:
>
> ports:
> type: object
> - $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + A node containing input and output port nodes with endpoint definitions
> + as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
>
> properties:
> port@0:
> @@ -81,15 +84,38 @@ properties:
> additionalProperties: false
>
> port@1:
> + type: object
> description:
> Output port node, multiple endpoints describing all the R-Car VIN
> modules connected the CSI-2 receiver.
>
> - required:
> - - port@0
> - - port@1
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + const: 1
> +
> + patternProperties:
> + "^endpoint@[0-9a-f]$":
> + type: object
>
> - unevaluatedProperties: false
> + properties:
> + reg:
> + maxItems: 1
> +
> + remote-endpoint: true
> +
> + required:
> + - reg
> + - remote-endpoint
> +
> + additionalProperties: false
> +
> + additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 25a70dc89a4c..ad2fe660364b 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -70,7 +70,6 @@ properties:
> #The per-board settings for Gen2 and RZ/G1 platforms:
> port:
> type: object
> - $ref: /schemas/graph.yaml#/properties/port
> description:
> A node containing a parallel input with a single endpoint definitions as
> documented in
> @@ -125,7 +124,9 @@ properties:
>
> ports:
> type: object
> - $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + A node containing input nodes with endpoint definitions as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
>
> properties:
> port@0:
> @@ -271,8 +272,6 @@ properties:
>
> additionalProperties: false
>
> - unevaluatedProperties: false
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> index e3152c8fdfea..c18574bb3e81 100644
> --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> @@ -37,9 +37,12 @@ properties:
> maxItems: 1
>
> port:
> - $ref: /schemas/graph.yaml#/properties/port
> + type: object
> description:
> - DCMI supports a single port node with parallel bus.
> + DCMI supports a single port node with parallel bus. It should contain
> + one 'port' child node with child 'endpoint' node. Please refer to the
> + bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
>
> properties:
> endpoint:
> diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
> index dc2c6be4fa4d..5e066629287d 100644
> --- a/Documentation/devicetree/bindings/media/ti,cal.yaml
> +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
> @@ -70,18 +70,23 @@ properties:
> # See ./video-interfaces.txt for details
> ports:
> type: object
> - $ref: /schemas/graph.yaml#/properties/ports
> - unevaluatedProperties: false
> + additionalProperties: false
>
> properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> port@0:
> type: object
> - description: CSI2 Port #0
> additionalProperties: false
>
> properties:
> reg:
> const: 0
> + description: CSI2 Port #0
>
> patternProperties:
> endpoint:
> @@ -103,12 +108,12 @@ properties:
>
> port@1:
> type: object
> - description: CSI2 Port #1
> additionalProperties: false
>
> properties:
> reg:
> const: 1
> + description: CSI2 Port #1
>
> patternProperties:
> endpoint:
> @@ -129,6 +134,8 @@ properties:
> - reg
>
> required:
> + - "#address-cells"
> + - "#size-cells"
> - port@0
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> index 0868718c3691..2961a5b6872f 100644
> --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> @@ -98,7 +98,6 @@ properties:
>
> ports:
> type: object
> - $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> port@0:
> @@ -142,11 +141,29 @@ properties:
> additionalProperties: false
>
> port@1:
> + type: object
> description: |
> Output / source port node, endpoint describing modules
> connected the CSI-2 receiver.
>
> - unevaluatedProperties: false
> + properties:
> +
> + reg:
> + const: 1
> +
> + endpoint:
> + type: object
> +
> + properties:
> +
> + remote-endpoint: true
> +
> + required:
> + - remote-endpoint
> +
> + additionalProperties: false
> +
> + additionalProperties: false
>
> required:
> - compatible
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2020-12-02 18:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 18:14 [PATCH 1/1] Revert "media: dt-bindings: media: Use OF graph schema" Sakari Ailus
2020-12-02 18:18 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202181809.GF13750@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=jacopo@jmondi.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox