[PATCH AUTOSEL 5.12 03/80] staging: media: rkvdec: fix pm_runtime_get_sync() usage count

[PATCH AUTOSEL 5.12 03/80] staging: media: rkvdec: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit e90812c47b958407b54d05780dc483fdc1b57a93 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkvdec/rkvdec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index d821661d30f3..8c17615f3a7a 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -658,7 +658,7 @@ static void rkvdec_device_run(void *priv)
 	if (WARN_ON(!desc))
 		return;
 
-	ret = pm_runtime_get_sync(rkvdec->dev);
+	ret = pm_runtime_resume_and_get(rkvdec->dev);
 	if (ret < 0) {
 		rkvdec_job_finish_no_pm(ctx, VB2_BUF_STATE_ERROR);
 		return;
-- 
2.30.2

[PATCH AUTOSEL 5.12 04/80] media: i2c: imx334: fix the pm runtime get logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 62c90446868b439929cb04395f04a709a64ae04b ]

The PM runtime get logic is currently broken, as it checks if
ret is zero instead of checking if it is an error code,
as reported by Dan Carpenter.

While here, use the pm_runtime_resume_and_get() as added by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors. As a bonus, such function
always return zero on success.

It should also be noticed that a fail of pm_runtime_get_sync() would
potentially result in a spurious runtime_suspend(), instead of
using pm_runtime_put_noidle().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/imx334.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index ad530f0d338a..02d22907c75c 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -717,9 +717,9 @@ static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(imx334->dev);
-		if (ret)
-			goto error_power_off;
+		ret = pm_runtime_resume_and_get(imx334->dev);
+		if (ret < 0)
+			goto error_unlock;
 
 		ret = imx334_start_streaming(imx334);
 		if (ret)
@@ -737,6 +737,7 @@ static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
 
 error_power_off:
 	pm_runtime_put(imx334->dev);
+error_unlock:
 	mutex_unlock(&imx334->mutex);
 
 	return ret;
-- 
2.30.2

[PATCH AUTOSEL 5.12 05/80] media: marvel-ccic: fix some issues when getting pm_runtime

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit e7c617cab7a522fba5b20f9033ee98565b6f3546 ]

Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().

While here, ensure that the error condition will be checked
during clock enable an media open() calls.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 141bf5d97a04..ea87110d9073 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -918,6 +918,7 @@ static int mclk_enable(struct clk_hw *hw)
 	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
 	int mclk_src;
 	int mclk_div;
+	int ret;
 
 	/*
 	 * Clock the sensor appropriately.  Controller clock should
@@ -931,7 +932,9 @@ static int mclk_enable(struct clk_hw *hw)
 		mclk_div = 2;
 	}
 
-	pm_runtime_get_sync(cam->dev);
+	ret = pm_runtime_resume_and_get(cam->dev);
+	if (ret < 0)
+		return ret;
 	clk_enable(cam->clk[0]);
 	mcam_reg_write(cam, REG_CLKCTRL, (mclk_src << 29) | mclk_div);
 	mcam_ctlr_power_up(cam);
@@ -1611,7 +1614,9 @@ static int mcam_v4l_open(struct file *filp)
 		ret = sensor_call(cam, core, s_power, 1);
 		if (ret)
 			goto out;
-		pm_runtime_get_sync(cam->dev);
+		ret = pm_runtime_resume_and_get(cam->dev);
+		if (ret < 0)
+			goto out;
 		__mcam_cam_reset(cam);
 		mcam_set_config_needed(cam, 1);
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.12 06/80] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit d07bb9702cf5f5ccf3fb661e6cab54bbc33cd23f ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
index ace4528cdc5e..f14779e7596e 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
@@ -391,12 +391,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct mtk_mdp_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
 	if (ret < 0)
-		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
+		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
 			    ctx->id, ret);
 
-	return 0;
+	return ret;
 }
 
 static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,
-- 
2.30.2

[PATCH AUTOSEL 5.12 07/80] media: s5p: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit fdc34e82c0f968ac4c157bd3d8c299ebc24c9c63 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/platform/s5p/s5p_cec.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/cec/platform/s5p/s5p_cec.c b/drivers/media/cec/platform/s5p/s5p_cec.c
index 2a3e7ffefe0a..2250c1cbc64e 100644
--- a/drivers/media/cec/platform/s5p/s5p_cec.c
+++ b/drivers/media/cec/platform/s5p/s5p_cec.c
@@ -35,10 +35,13 @@ MODULE_PARM_DESC(debug, "debug level (0-2)");
 
 static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable)
 {
+	int ret;
 	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
 
 	if (enable) {
-		pm_runtime_get_sync(cec->dev);
+		ret = pm_runtime_resume_and_get(cec->dev);
+		if (ret < 0)
+			return ret;
 
 		s5p_cec_reset(cec);
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 08/80] media: am437x: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit c41e02493334985cca1a22efd5ca962ce3abb061 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/am437x/am437x-vpfe.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index 6cdc77dda0e4..1c9cb9e05fdf 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -1021,7 +1021,9 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe)
 	if (ret)
 		return ret;
 
-	pm_runtime_get_sync(vpfe->pdev);
+	ret = pm_runtime_resume_and_get(vpfe->pdev);
+	if (ret < 0)
+		return ret;
 
 	vpfe_config_enable(&vpfe->ccdc, 1);
 
@@ -2443,7 +2445,11 @@ static int vpfe_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	/* for now just enable it here instead of waiting for the open */
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0) {
+		vpfe_err(vpfe, "Unable to resume device.\n");
+		goto probe_out_v4l2_unregister;
+	}
 
 	vpfe_ccdc_config_defaults(ccdc);
 
@@ -2530,6 +2536,11 @@ static int vpfe_suspend(struct device *dev)
 
 	/* only do full suspend if streaming has started */
 	if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
+		/*
+		 * ignore RPM resume errors here, as it is already too late.
+		 * A check like that should happen earlier, either at
+		 * open() or just before start streaming.
+		 */
 		pm_runtime_get_sync(dev);
 		vpfe_config_enable(ccdc, 1);
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 09/80] media: sh_vou: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 6e8b1526db164c9d4b9dacfb9bc48e365d7c4860 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at open time.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sh_vou.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index 4ac48441f22c..ca4310e26c49 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -1133,7 +1133,11 @@ static int sh_vou_open(struct file *file)
 	if (v4l2_fh_is_singular_file(file) &&
 	    vou_dev->status == SH_VOU_INITIALISING) {
 		/* First open */
-		pm_runtime_get_sync(vou_dev->v4l2_dev.dev);
+		err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
+		if (err < 0) {
+			v4l2_fh_release(file);
+			goto done_open;
+		}
 		err = sh_vou_hw_init(vou_dev);
 		if (err < 0) {
 			pm_runtime_put(vou_dev->v4l2_dev.dev);
-- 
2.30.2

[PATCH AUTOSEL 5.12 10/80] media: mtk-vcodec: fix PM runtime get logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 908711f542c17fe61e5d653da1beb8e5ab5c7b50 ]

Currently, the driver just assumes that PM runtime logic
succeded resuming the device.

That may not be the case, as pm_runtime_get_sync()
can fail (but keeping the usage count incremented).

Replace the code to use pm_runtime_resume_and_get(),
and letting it return the error code.

This way, if mtk_vcodec_dec_pw_on() fails, the logic
under fops_vcodec_open() will do the right thing and
return an error, instead of just assuming that the
device is ready to be used.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 4 +++-
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 8 +++++---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h  | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index 147dfef1638d..f87dc47d9e63 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -126,7 +126,9 @@ static int fops_vcodec_open(struct file *file)
 	mtk_vcodec_dec_set_default_params(ctx);
 
 	if (v4l2_fh_is_singular(&ctx->fh)) {
-		mtk_vcodec_dec_pw_on(&dev->pm);
+		ret = mtk_vcodec_dec_pw_on(&dev->pm);
+		if (ret < 0)
+			goto err_load_fw;
 		/*
 		 * Does nothing if firmware was already loaded.
 		 */
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index ddee7046ce42..6038db96f71c 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -88,13 +88,15 @@ void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 	put_device(dev->pm.larbvdec);
 }
 
-void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
+int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(pm->dev);
+	ret = pm_runtime_resume_and_get(pm->dev);
 	if (ret)
-		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
+
+	return ret;
 }
 
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
index 872d8bf8cfaf..280aeaefdb65 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
@@ -12,7 +12,7 @@
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *dev);
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev);
 
-void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm);
+int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm);
-- 
2.30.2

[PATCH AUTOSEL 5.12 11/80] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 10343de268d10cf07b092b8b525e12ad558ead77 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a plus, pm_runtime_resume_and_get() doesn't return
positive numbers, so the return code validation can
be removed.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 026111505f5a..d402e456f27d 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2566,11 +2566,8 @@ static void s5p_jpeg_buf_queue(struct vb2_buffer *vb)
 static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
-	int ret;
-
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
 
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(ctx->jpeg->dev);
 }
 
 static void s5p_jpeg_stop_streaming(struct vb2_queue *q)
-- 
2.30.2

[PATCH AUTOSEL 5.12 12/80] media: sunxi: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 9c298f82d8392f799a0595f50076afa1d91e9092 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
index 3f81dd17755c..fbcca59a0517 100644
--- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
+++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
@@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
 		struct device *dev = ctx->dev->dev;
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0) {
 			dev_err(dev, "Failed to enable module\n");
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 13/80] media: sti/bdisp: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit c44eac5b72e23c31eefc0e10a71d9650036b8341 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.

The bdisp_start_streaming() doesn't take it into account, which
would unbalance PM usage counter at bdisp_stop_streaming().

The logic at bdisp_probe() is correct, but the best is to use
the same call along the driver.

So, replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index 060ca85f64d5..85288da9d2ae 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -499,7 +499,7 @@ static int bdisp_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct bdisp_ctx *ctx = q->drv_priv;
 	struct vb2_v4l2_buffer *buf;
-	int ret = pm_runtime_get_sync(ctx->bdisp_dev->dev);
+	int ret = pm_runtime_resume_and_get(ctx->bdisp_dev->dev);
 
 	if (ret < 0) {
 		dev_err(ctx->bdisp_dev->dev, "failed to set runtime PM\n");
@@ -1364,10 +1364,10 @@ static int bdisp_probe(struct platform_device *pdev)
 
 	/* Power management */
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_pm;
+		goto err_remove;
 	}
 
 	/* Filters */
@@ -1395,6 +1395,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	bdisp_hw_free_filters(bdisp->dev);
 err_pm:
 	pm_runtime_put(dev);
+err_remove:
 	bdisp_debugfs_remove(bdisp);
 	v4l2_device_unregister(&bdisp->v4l2_dev);
 err_clk:
-- 
2.30.2

[PATCH AUTOSEL 5.12 14/80] media: exynos4-is: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 59f96244af9403ddf4810ec5c0fbe8920857634e ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.

On some places, this is ok, but on others the usage count
ended being unbalanced on failures.

Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a bonus, such function always return zero on success. So,
some code can be simplified.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-capture.c   |  6 ++----
 drivers/media/platform/exynos4-is/fimc-is.c        |  4 ++--
 drivers/media/platform/exynos4-is/fimc-isp-video.c |  3 +--
 drivers/media/platform/exynos4-is/fimc-isp.c       |  7 +++----
 drivers/media/platform/exynos4-is/fimc-lite.c      |  5 +++--
 drivers/media/platform/exynos4-is/fimc-m2m.c       |  5 +----
 drivers/media/platform/exynos4-is/media-dev.c      |  9 +++------
 drivers/media/platform/exynos4-is/mipi-csis.c      | 10 ++++------
 8 files changed, 19 insertions(+), 30 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 13c838d3f947..0da36443173c 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
 		goto unlock;
 
 	set_bit(ST_CAPT_BUSY, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = v4l2_fh_open(file);
 	if (ret) {
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 972d9601d236..1b24f5bfc4af 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
 			goto err_irq;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_irq;
 
 	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index 612b9872afc8..8d9dc597deaa 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(&isp->pdev->dev);
+	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
 	if (ret < 0)
 		goto rel_fh;
 
@@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
 	if (!ret)
 		goto unlock;
 rel_fh:
-	pm_runtime_put_noidle(&isp->pdev->dev);
 	v4l2_fh_release(file);
 unlock:
 	mutex_unlock(&isp->video_lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index a77c49b18511..74b49d30901e 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 	pr_debug("on: %d\n", on);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put(&is->pdev->dev);
+		ret = pm_runtime_resume_and_get(&is->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index fe20af3a7178..4d8b18078ff3 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
 	}
 
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_in_use;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
@@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
 	v4l2_fh_release(file);
 err_pm:
 	pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
 	clear_bit(ST_FLITE_IN_USE, &fimc->state);
 unlock:
 	mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
index c9704a147e5c..df8e2aa454d8 100644
--- a/drivers/media/platform/exynos4-is/fimc-m2m.c
+++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
@@ -73,17 +73,14 @@ static void fimc_m2m_shutdown(struct fimc_ctx *ctx)
 static int start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct fimc_ctx *ctx = q->drv_priv;
-	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
 }
 
 static void stop_streaming(struct vb2_queue *q)
 {
 	struct fimc_ctx *ctx = q->drv_priv;
 
-
 	fimc_m2m_shutdown(ctx);
 	fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
 	pm_runtime_put(&ctx->fimc_dev->pdev->dev);
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 8e1e892085ec..4424050a22e4 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -510,11 +510,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 	if (!fmd->pmf)
 		return -ENXIO;
 
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0) {
-		pm_runtime_put(fmd->pmf);
+	ret = pm_runtime_resume_and_get(fmd->pmf);
+	if (ret < 0)
 		return ret;
-	}
 
 	fmd->num_sensors = 0;
 
@@ -1289,8 +1287,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
 	if (camclk->fmd->pmf == NULL)
 		return -ENODEV;
 
-	ret = pm_runtime_get_sync(camclk->fmd->pmf);
-	return ret < 0 ? ret : 0;
+	return pm_runtime_resume_and_get(camclk->fmd->pmf);
 }
 
 static void cam_clk_unprepare(struct clk_hw *hw)
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 1aac167abb17..ebf39c856894 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
 	struct device *dev = &state->pdev->dev;
 
 	if (on)
-		return pm_runtime_get_sync(dev);
+		return pm_runtime_resume_and_get(dev);
 
 	return pm_runtime_put_sync(dev);
 }
@@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 
 	if (enable) {
 		s5pcsis_clear_counters(state);
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
 	}
 
 	mutex_lock(&state->lock);
@@ -535,7 +533,7 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (!enable)
 		pm_runtime_put(&state->pdev->dev);
 
-	return ret == 1 ? 0 : ret;
+	return ret;
 }
 
 static int s5pcsis_enum_mbus_code(struct v4l2_subdev *sd,
-- 
2.30.2

[PATCH AUTOSEL 5.12 15/80] media: exynos-gsc: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 59087b66ea6730c130c57d23bd9fd139b78c1ba5 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a bonus, as pm_runtime_get_sync() always return 0 on
success, the logic can be simplified.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-m2m.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 27a3c92c73bc..f1cf847d1cc2 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -56,10 +56,8 @@ static void __gsc_m2m_job_abort(struct gsc_ctx *ctx)
 static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct gsc_ctx *ctx = q->drv_priv;
-	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
 }
 
 static void __gsc_m2m_cleanup_queue(struct gsc_ctx *ctx)
-- 
2.30.2

[PATCH AUTOSEL 5.12 24/80] media: sti: fix obj-$(config) targets

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 56c1f0876293888f686e31278d183d4af2cac3c3 ]

The right thing to do is to add a new object to the building
system when a certain config option is selected, and *not*
override them.

So, fix obj-$(config) logic at sti makefiles, using "+=",
instead of ":=".

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/Makefile | 2 +-
 drivers/media/platform/sti/delta/Makefile | 2 +-
 drivers/media/platform/sti/hva/Makefile   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/Makefile b/drivers/media/platform/sti/bdisp/Makefile
index caf7ccd193ea..39ade0a34723 100644
--- a/drivers/media/platform/sti/bdisp/Makefile
+++ b/drivers/media/platform/sti/bdisp/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_BDISP) := bdisp.o
+obj-$(CONFIG_VIDEO_STI_BDISP) += bdisp.o
 
 bdisp-objs := bdisp-v4l2.o bdisp-hw.o bdisp-debug.o
diff --git a/drivers/media/platform/sti/delta/Makefile b/drivers/media/platform/sti/delta/Makefile
index 92b37e216f00..32412fa4c632 100644
--- a/drivers/media/platform/sti/delta/Makefile
+++ b/drivers/media/platform/sti/delta/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_DELTA_DRIVER) := st-delta.o
+obj-$(CONFIG_VIDEO_STI_DELTA_DRIVER) += st-delta.o
 st-delta-y := delta-v4l2.o delta-mem.o delta-ipc.o delta-debug.o
 
 # MJPEG support
diff --git a/drivers/media/platform/sti/hva/Makefile b/drivers/media/platform/sti/hva/Makefile
index 74b41ec52f97..b5a5478bdd01 100644
--- a/drivers/media/platform/sti/hva/Makefile
+++ b/drivers/media/platform/sti/hva/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_HVA) := st-hva.o
+obj-$(CONFIG_VIDEO_STI_HVA) += st-hva.o
 st-hva-y := hva-v4l2.o hva-hw.o hva-mem.o hva-h264.o
 st-hva-$(CONFIG_VIDEO_STI_HVA_DEBUGFS) += hva-debugfs.o
-- 
2.30.2

[PATCH AUTOSEL 5.12 26/80] media: cpia2: fix memory leak in cpia2_usb_probe

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]

syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cpia2/cpia2.h      |  1 +
 drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++
 drivers/media/usb/cpia2/cpia2_usb.c  | 13 +++++++------
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h
index 50835f5f7512..57b7f1ea68da 100644
--- a/drivers/media/usb/cpia2/cpia2.h
+++ b/drivers/media/usb/cpia2/cpia2.h
@@ -429,6 +429,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
 int cpia2_do_command(struct camera_data *cam,
 		     unsigned int command,
 		     unsigned char direction, unsigned char param);
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf);
 struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf);
 int cpia2_init_camera(struct camera_data *cam);
 int cpia2_allocate_buffers(struct camera_data *cam);
diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c
index e747548ab286..b5a2d06fb356 100644
--- a/drivers/media/usb/cpia2/cpia2_core.c
+++ b/drivers/media/usb/cpia2/cpia2_core.c
@@ -2163,6 +2163,18 @@ static void reset_camera_struct(struct camera_data *cam)
 	cam->height = cam->params.roi.height;
 }
 
+/******************************************************************************
+ *
+ *  cpia2_init_camera_struct
+ *
+ *  Deinitialize camera struct
+ *****************************************************************************/
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf)
+{
+	v4l2_device_unregister(&cam->v4l2_dev);
+	kfree(cam);
+}
+
 /******************************************************************************
  *
  *  cpia2_init_camera_struct
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 3ab80a7b4498..76aac06f9fb8 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -844,15 +844,13 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = set_alternate(cam, USBIF_CMDONLY);
 	if (ret < 0) {
 		ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 
 	if((ret = cpia2_init_camera(cam)) < 0) {
 		ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 	LOG("  CPiA Version: %d.%02d (%d.%d)\n",
 	       cam->params.version.firmware_revision_hi,
@@ -872,11 +870,14 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = cpia2_register_camera(cam);
 	if (ret < 0) {
 		ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 	return 0;
+
+alt_err:
+	cpia2_deinit_camera_struct(cam, intf);
+	return ret;
 }
 
 /******************************************************************************
-- 
2.30.2

[PATCH AUTOSEL 5.12 27/80] media: cobalt: fix race condition in setting HPD

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]

The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.

This is used among other things for setting the HPD output pin.

But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.

Serialize this function with a mutex.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cobalt/cobalt-driver.c | 1 +
 drivers/media/pci/cobalt/cobalt-driver.h | 7 ++++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 0695078ef812..1bd8bbe57a30 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -667,6 +667,7 @@ static int cobalt_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	cobalt->pci_dev = pci_dev;
 	cobalt->instance = i;
+	mutex_init(&cobalt->pci_lock);
 
 	retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev);
 	if (retval) {
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h
index bca68572b324..12c33e035904 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -251,6 +251,8 @@ struct cobalt {
 	int instance;
 	struct pci_dev *pci_dev;
 	struct v4l2_device v4l2_dev;
+	/* serialize PCI access in cobalt_s_bit_sysctrl() */
+	struct mutex pci_lock;
 
 	void __iomem *bar0, *bar1;
 
@@ -320,10 +322,13 @@ static inline u32 cobalt_g_sysctrl(struct cobalt *cobalt)
 static inline void cobalt_s_bit_sysctrl(struct cobalt *cobalt,
 					int bit, int val)
 {
-	u32 ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
+	u32 ctrl;
 
+	mutex_lock(&cobalt->pci_lock);
+	ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
 	cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE,
 			(ctrl & ~(1UL << bit)) | (val << bit));
+	mutex_unlock(&cobalt->pci_lock);
 }
 
 static inline u32 cobalt_g_sysstat(struct cobalt *cobalt)
-- 
2.30.2

[PATCH AUTOSEL 5.12 28/80] media: hevc: Fix dependent slice segment flags

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 67a7e53d5b21f3a84efc03a4e62db7caf97841ef ]

Dependent slice segment flag for PPS control is misnamed. It should have
"enabled" at the end. It only tells if this flag is present in slice
header or not and not the actual value.

Fix this by renaming the PPS flag and introduce another flag for slice
control which tells actual value.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 5 ++++-
 drivers/staging/media/sunxi/cedrus/cedrus_h265.c          | 4 ++--
 include/media/hevc-ctrls.h                                | 3 ++-
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 00944e97d638..09f28ba60e6f 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3285,7 +3285,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -3493,6 +3493,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry
 
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index ce497d0197df..10744fab7cea 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -477,8 +477,8 @@ static void cedrus_h265_setup(struct cedrus_ctx *ctx,
 				slice_params->flags);
 
 	reg |= VE_DEC_H265_FLAG(VE_DEC_H265_DEC_SLICE_HDR_INFO0_FLAG_DEPENDENT_SLICE_SEGMENT,
-				V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT,
-				pps->flags);
+				V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT,
+				slice_params->flags);
 
 	/* FIXME: For multi-slice support. */
 	reg |= VE_DEC_H265_DEC_SLICE_HDR_INFO0_FLAG_FIRST_SLICE_SEGMENT_IN_PIC;
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index b4cb2ef02f17..226fcfa0e026 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -81,7 +81,7 @@ struct v4l2_ctrl_hevc_sps {
 	__u64	flags;
 };
 
-#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT		(1ULL << 0)
+#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED	(1ULL << 0)
 #define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT			(1ULL << 1)
 #define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED		(1ULL << 2)
 #define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT			(1ULL << 3)
@@ -160,6 +160,7 @@ struct v4l2_hevc_pred_weight_table {
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV		(1ULL << 6)
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7)
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT	(1ULL << 9)
 
 struct v4l2_ctrl_hevc_slice_params {
 	__u32	bit_size;
-- 
2.30.2

[PATCH AUTOSEL 5.12 29/80] media: pvrusb2: fix warning in pvr2_i2c_core_done

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]

syzbot has reported the following warning in pvr2_i2c_done:

	sysfs group 'power' not found for kobject '1-0043'

When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.

To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.

Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index f4a727918e35..d38dee1792e4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2676,9 +2676,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
 		pvr2_stream_destroy(hdw->vid_stream);
 		hdw->vid_stream = NULL;
 	}
-	pvr2_i2c_core_done(hdw);
 	v4l2_device_unregister(&hdw->v4l2_dev);
-	pvr2_hdw_remove_usb_stuff(hdw);
+	pvr2_hdw_disconnect(hdw);
 	mutex_lock(&pvr2_unit_mtx);
 	do {
 		if ((hdw->unit_number >= 0) &&
@@ -2705,6 +2704,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
 {
 	pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
 	LOCK_TAKE(hdw->big_lock);
+	pvr2_i2c_core_done(hdw);
 	LOCK_TAKE(hdw->ctl_lock);
 	pvr2_hdw_remove_usb_stuff(hdw);
 	LOCK_GIVE(hdw->ctl_lock);
-- 
2.30.2

[PATCH AUTOSEL 5.12 30/80] media: imx: imx7_mipi_csis: Fix logging of only error event counters

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d2fcc9c2de1191ea80366e3658711753738dd10a ]

The mipi_csis_events array ends with 6 non-error events, not 4. Update
mipi_csis_log_counters() accordingly. While at it, log event counters in
forward order, as there's no reason to log them backward.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index a01a7364b4b9..b365790256e4 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -597,13 +597,15 @@ static void mipi_csis_clear_counters(struct csi_state *state)
 
 static void mipi_csis_log_counters(struct csi_state *state, bool non_errors)
 {
-	int i = non_errors ? MIPI_CSIS_NUM_EVENTS : MIPI_CSIS_NUM_EVENTS - 4;
+	unsigned int num_events = non_errors ? MIPI_CSIS_NUM_EVENTS
+				: MIPI_CSIS_NUM_EVENTS - 6;
 	struct device *dev = &state->pdev->dev;
 	unsigned long flags;
+	unsigned int i;
 
 	spin_lock_irqsave(&state->slock, flags);
 
-	for (i--; i >= 0; i--) {
+	for (i = 0; i < num_events; ++i) {
 		if (state->events[i].counter > 0 || state->debug)
 			dev_info(dev, "%s events: %d\n", state->events[i].name,
 				 state->events[i].counter);
-- 
2.30.2

[PATCH AUTOSEL 5.12 37/80] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off

[Sasha Levin]

From: Dillon Min <dillon.minfei@gmail.com>

[ Upstream commit 24786ccd9c80fdb05494aa4d90fcb8f34295c193 ]

On some platform(imx6q), xvclk might not switch on in advance,
also for power save purpose, xvclk should not be always on.
so, add clk_prepare_enable(), clk_disable_unprepare() in driver
side to set xvclk on/off at proper stage.

Add following changes:
- add 'struct clk *clk;' in 'struct ov2659 {}'
- enable xvclk in ov2659_power_on()
- disable xvclk in ov2659_power_off()

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2659.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 42f64175a6df..fb78a1cedc03 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -204,6 +204,7 @@ struct ov2659 {
 	struct i2c_client *client;
 	struct v4l2_ctrl_handler ctrls;
 	struct v4l2_ctrl *link_frequency;
+	struct clk *clk;
 	const struct ov2659_framesize *frame_size;
 	struct sensor_register *format_ctrl_regs;
 	struct ov2659_pll_ctrl pll;
@@ -1270,6 +1271,8 @@ static int ov2659_power_off(struct device *dev)
 
 	gpiod_set_value(ov2659->pwdn_gpio, 1);
 
+	clk_disable_unprepare(ov2659->clk);
+
 	return 0;
 }
 
@@ -1278,9 +1281,17 @@ static int ov2659_power_on(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov2659 *ov2659 = to_ov2659(sd);
+	int ret;
 
 	dev_dbg(&client->dev, "%s:\n", __func__);
 
+	ret = clk_prepare_enable(ov2659->clk);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable clock\n",
+			__func__);
+		return ret;
+	}
+
 	gpiod_set_value(ov2659->pwdn_gpio, 0);
 
 	if (ov2659->resetb_gpio) {
@@ -1425,7 +1436,6 @@ static int ov2659_probe(struct i2c_client *client)
 	const struct ov2659_platform_data *pdata = ov2659_get_pdata(client);
 	struct v4l2_subdev *sd;
 	struct ov2659 *ov2659;
-	struct clk *clk;
 	int ret;
 
 	if (!pdata) {
@@ -1440,11 +1450,11 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->pdata = pdata;
 	ov2659->client = client;
 
-	clk = devm_clk_get(&client->dev, "xvclk");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ov2659->clk = devm_clk_get(&client->dev, "xvclk");
+	if (IS_ERR(ov2659->clk))
+		return PTR_ERR(ov2659->clk);
 
-	ov2659->xvclk_frequency = clk_get_rate(clk);
+	ov2659->xvclk_frequency = clk_get_rate(ov2659->clk);
 	if (ov2659->xvclk_frequency < 6000000 ||
 	    ov2659->xvclk_frequency > 27000000)
 		return -EINVAL;
@@ -1506,7 +1516,9 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->frame_size = &ov2659_framesizes[2];
 	ov2659->format_ctrl_regs = ov2659_formats[0].format_ctrl_regs;
 
-	ov2659_power_on(&client->dev);
+	ret = ov2659_power_on(&client->dev);
+	if (ret < 0)
+		goto error;
 
 	ret = ov2659_detect(sd);
 	if (ret < 0)
-- 
2.30.2

[PATCH AUTOSEL 5.12 38/80] media: bt878: do not schedule tasklet when it is not setup

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a3a54bf4bddaecda8b5767209cfc703f0be2841d ]

There is a problem with the tasklet in bt878. bt->tasklet is set by
dvb-bt8xx.ko, and bt878.ko can be loaded independently.
In this case if interrupt comes it may cause null-ptr-dereference.
To solve this issue, we check if the tasklet is actually set before
calling tasklet_schedule.

[    1.750438] bt878(0): irq FDSR FBUS risc_pc=
[    1.750728] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.752969] RIP: 0010:0x0
[    1.757526] Call Trace:
[    1.757659]  <IRQ>
[    1.757770]  tasklet_action_common.isra.0+0x107/0x110
[    1.758041]  tasklet_action+0x22/0x30
[    1.758237]  __do_softirq+0xe0/0x29b
[    1.758430]  irq_exit_rcu+0xa4/0xb0
[    1.758618]  common_interrupt+0x8d/0xa0
[    1.758824]  </IRQ>

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 78dd35c9b65d..7ca309121fb5 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -300,7 +300,8 @@ static irqreturn_t bt878_irq(int irq, void *dev_id)
 		}
 		if (astat & BT878_ARISCI) {
 			bt->finished_block = (stat & BT878_ARISCS) >> 28;
-			tasklet_schedule(&bt->tasklet);
+			if (bt->tasklet.callback)
+				tasklet_schedule(&bt->tasklet);
 			break;
 		}
 		count++;
-- 
2.30.2

[PATCH AUTOSEL 5.12 39/80] media: em28xx: Fix possible memory leak of em28xx struct

[Sasha Levin]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

[ Upstream commit ac5688637144644f06ed1f3c6d4dd8bb7db96020 ]

The em28xx struct kref isn't being decreased after an error in the
em28xx_ir_init, leading to a possible memory leak.

A kref_put and em28xx_shutdown_buttons is added to the error handler code.

Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-input.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 5aa15a7a49de..59529cbf9cd0 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -720,7 +720,8 @@ static int em28xx_ir_init(struct em28xx *dev)
 			dev->board.has_ir_i2c = 0;
 			dev_warn(&dev->intf->dev,
 				 "No i2c IR remote control device found.\n");
-			return -ENODEV;
+			err = -ENODEV;
+			goto ref_put;
 		}
 	}
 
@@ -735,7 +736,7 @@ static int em28xx_ir_init(struct em28xx *dev)
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	if (!ir)
-		return -ENOMEM;
+		goto ref_put;
 	rc = rc_allocate_device(RC_DRIVER_SCANCODE);
 	if (!rc)
 		goto error;
@@ -839,6 +840,9 @@ static int em28xx_ir_init(struct em28xx *dev)
 	dev->ir = NULL;
 	rc_free_device(rc);
 	kfree(ir);
+ref_put:
+	em28xx_shutdown_buttons(dev);
+	kref_put(&dev->ref, em28xx_free_device);
 	return err;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 40/80] media: hantro: Fix .buf_prepare

[Sasha Levin]

From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

[ Upstream commit 082aaecff35fbe1937531057911b1dd1fc6b496e ]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in hantro_g1_h264_dec.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_v4l2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
index 1bc118e375a1..7ccc6405036a 100644
--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -639,7 +639,14 @@ static int hantro_buf_prepare(struct vb2_buffer *vb)
 	ret = hantro_buf_plane_check(vb, pix_fmt);
 	if (ret)
 		return ret;
-	vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 41/80] media: cedrus: Fix .buf_prepare

[Sasha Levin]

From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

[ Upstream commit d84b9202d712309840f8b5abee0ed272506563bd ]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in cedrus_h264.c or cedrus_vp8.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..bf731caf2ed5 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -457,7 +457,13 @@ static int cedrus_buf_prepare(struct vb2_buffer *vb)
 	if (vb2_plane_size(vb, 0) < pix_fmt->sizeimage)
 		return -EINVAL;
 
-	vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
 
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.12 42/80] media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release

[Sasha Levin]

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]

A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.

My patch sets the dangling pointer to NULL to provide
robust.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-fh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c
index 684574f58e82..90eec79ee995 100644
--- a/drivers/media/v4l2-core/v4l2-fh.c
+++ b/drivers/media/v4l2-core/v4l2-fh.c
@@ -96,6 +96,7 @@ int v4l2_fh_release(struct file *filp)
 		v4l2_fh_del(fh);
 		v4l2_fh_exit(fh);
 		kfree(fh);
+		filp->private_data = NULL;
 	}
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.12 43/80] media: bt8xx: Fix a missing check bug in bt878_probe

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 1a4520090681853e6b850cbe54b27247a013e0e5 ]

In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is
set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'.
However, this two drivers are separate. The user may not load the
'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet
has not been initialized when 'tasklet_schedule' is called, so it is
necessary to check whether the tasklet is initialized in 'bt878_probe'.

Fix this by adding a check at the end of bt878_probe.

The KASAN's report reveals it:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177-
gdba4159c14ef-dirty #40
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522
 tasklet_action+0x50/0x70 kernel/softirq.c:540
 __do_softirq+0x224/0x92c kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:372 [inline]
 irq_exit+0x15a/0x180 kernel/softirq.c:412
 exiting_irq arch/x86/include/asm/apic.h:535 [inline]
 do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline]
RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline]
RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584
Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8
14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad
24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec
RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde
RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000
RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0
RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58
R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000
 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4692a9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f
RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60
R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: 0000000000000000
---[ end trace 68e5849c3f77cbb6 ]---
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 7ca309121fb5..90972d6952f1 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -478,6 +478,9 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btwrite(0, BT878_AINT_MASK);
 	bt878_num++;
 
+	if (!bt->tasklet.func)
+		tasklet_disable(&bt->tasklet);
+
 	return 0;
 
       fail2:
-- 
2.30.2

[PATCH AUTOSEL 5.12 44/80] media: st-hva: Fix potential NULL pointer dereferences

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]

When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index f59811e27f51..6eeee5017fac 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -130,8 +130,7 @@ static irqreturn_t hva_hw_its_irq_thread(int irq, void *arg)
 	ctx_id = (hva->sts_reg & 0xFF00) >> 8;
 	if (ctx_id >= HVA_MAX_INSTANCES) {
 		dev_err(dev, "%s     %s: bad context identifier: %d\n",
-			ctx->name, __func__, ctx_id);
-		ctx->hw_err = true;
+			HVA_PREFIX, __func__, ctx_id);
 		goto out;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 47/80] media: dvd_usb: memory leak in cinergyt2_fe_attach

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 9ad1efee086e0e913914fa2b2173efb830bad68c ]

When the driver fails to talk with the hardware with dvb_usb_generic_rw,
it will return an error to dvb_usb_adapter_frontend_init. However, the
driver forgets to free the resource (e.g., struct cinergyt2_fe_state),
which leads to a memory leak.

Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw
fails in cinergyt2_frontend_attach.

backtrace:
  [<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline]
  [<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline]
  [<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271
  [<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74
  [<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
  [<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline]
  [<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline]
  [<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287

Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/cinergyT2-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 969a7ec71dff..4116ba5c45fc 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -78,6 +78,8 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 
 	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 	if (ret < 0) {
+		if (adap->fe_adap[0].fe)
+			adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe);
 		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
 	}
 	mutex_unlock(&d->data_mutex);
-- 
2.30.2

[PATCH AUTOSEL 5.12 56/80] media: dvb_net: avoid speculation from net slot

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]

The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).

(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.

Yet, fixing it is trivial.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index 89620da983ba..dddebea644bb 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -45,6 +45,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/nospec.h>
 #include <linux/etherdevice.h>
 #include <linux/dvb/net.h>
 #include <linux/uio.h>
@@ -1462,14 +1463,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct dvb_net_if *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (if_num >= DVB_NET_DEVICES_MAX) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		if (!dvbnet->state[if_num]) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
@@ -1522,14 +1529,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct __dvb_net_if_old *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
+
+		if (if_num >= DVB_NET_DEVICES_MAX) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (!dvbnet->state[if_num]) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
-- 
2.30.2

[PATCH AUTOSEL 5.12 57/80] media: dvbdev: fix error logic at dvb_register_device()

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 1fec2ecc252301110e4149e6183fa70460d29674 ]

As reported by smatch:

	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:510 dvb_register_device() warn: '&dvbdev->list_head' not removed from list
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:530 dvb_register_device() warn: '&dvbdev->list_head' not removed from list
	drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:545 dvb_register_device() warn: '&dvbdev->list_head' not removed from list

The error logic inside dvb_register_device() doesn't remove
devices from the dvb_adapter_list in case of errors.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 3862ddc86ec4..795d9bfaba5c 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -506,6 +506,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 			break;
 
 	if (minor == MAX_DVB_MINORS) {
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		up_write(&minor_rwsem);
@@ -526,6 +527,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		      __func__);
 
 		dvb_media_device_free(dvbdev);
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		mutex_unlock(&dvbdev_register_lock);
@@ -541,6 +543,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
 		dvb_media_device_free(dvbdev);
+		list_del (&dvbdev->list_head);
 		kfree(dvbdevfops);
 		kfree(dvbdev);
 		return PTR_ERR(clsdev);
-- 
2.30.2

[PATCH AUTOSEL 5.12 58/80] media: siano: fix device register error path

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]

As reported by smatch:
	drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list

If an error occur at the end of the registration logic, it won't
drop the device from the list.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/siano/smsdvb-main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index ae17407e477a..7cc654bc52d3 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -1176,6 +1176,10 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 	return 0;
 
 media_graph_error:
+	mutex_lock(&g_smsdvb_clientslock);
+	list_del(&client->entry);
+	mutex_unlock(&g_smsdvb_clientslock);
+
 	smsdvb_debugfs_release(client);
 
 client_error:
-- 
2.30.2

[PATCH AUTOSEL 5.12 59/80] media: imx-csi: Skip first few frames from a BT.656 source

[Sasha Levin]

From: Steve Longerbeam <slongerbeam@gmail.com>

[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]

Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.

[fabio: fixed checkpatch warning and increased the frame skipping to 20]

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csi.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index ef5add079774..7f4b967646d9 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -753,9 +753,10 @@ static int csi_setup(struct csi_priv *priv)
 
 static int csi_start(struct csi_priv *priv)
 {
-	struct v4l2_fract *output_fi;
+	struct v4l2_fract *input_fi, *output_fi;
 	int ret;
 
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
 	output_fi = &priv->frame_interval[priv->active_output_pad];
 
 	/* start upstream */
@@ -764,6 +765,17 @@ static int csi_start(struct csi_priv *priv)
 	if (ret)
 		return ret;
 
+	/* Skip first few frames from a BT.656 source */
+	if (priv->upstream_ep.bus_type == V4L2_MBUS_BT656) {
+		u32 delay_usec, bad_frames = 20;
+
+		delay_usec = DIV_ROUND_UP_ULL((u64)USEC_PER_SEC *
+			input_fi->numerator * bad_frames,
+			input_fi->denominator);
+
+		usleep_range(delay_usec, delay_usec + 1000);
+	}
+
 	if (priv->dest == IPU_CSI_DEST_IDMAC) {
 		ret = csi_idmac_start(priv);
 		if (ret)
-- 
2.30.2

[PATCH AUTOSEL 5.12 80/80] media: Fix Media Controller API config checks

[Sasha Levin]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit 50e7a31d30e8221632675abed3be306382324ca2 ]

Smatch static checker warns that "mdev" can be null:

sound/usb/media.c:287 snd_media_device_create()
    warn: 'mdev' can also be NULL

If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.

The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.

sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o

select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
       (MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)

The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.

 #if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)

This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.

Fix the problem requires two changes:

1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
   as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
   the check unchanged to be consistent with drivers/media/Makefile.

2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
   in mc-objs when CONFIG_USB is enabled.

Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/mc/Makefile           | 2 +-
 include/media/media-dev-allocator.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/mc/Makefile b/drivers/media/mc/Makefile
index 119037f0e686..2b7af42ba59c 100644
--- a/drivers/media/mc/Makefile
+++ b/drivers/media/mc/Makefile
@@ -3,7 +3,7 @@
 mc-objs	:= mc-device.o mc-devnode.o mc-entity.o \
 	   mc-request.o
 
-ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_USB),)
 	mc-objs += mc-dev-allocator.o
 endif
 
diff --git a/include/media/media-dev-allocator.h b/include/media/media-dev-allocator.h
index b35ea6062596..2ab54d426c64 100644
--- a/include/media/media-dev-allocator.h
+++ b/include/media/media-dev-allocator.h
@@ -19,7 +19,7 @@
 
 struct usb_device;
 
-#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
+#if defined(CONFIG_MEDIA_CONTROLLER) && IS_ENABLED(CONFIG_USB)
 /**
  * media_device_usb_allocate() - Allocate and return struct &media device
  *
-- 
2.30.2