[PATCH AUTOSEL 4.14 02/25] media: sh_vou: fix pm_runtime_get_sync() usage count

[PATCH AUTOSEL 4.14 02/25] media: sh_vou: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 6e8b1526db164c9d4b9dacfb9bc48e365d7c4860 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at open time.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sh_vou.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index 871da2a2a91c..06381c88229f 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -1147,7 +1147,11 @@ static int sh_vou_open(struct file *file)
 	if (v4l2_fh_is_singular_file(file) &&
 	    vou_dev->status == SH_VOU_INITIALISING) {
 		/* First open */
-		pm_runtime_get_sync(vou_dev->v4l2_dev.dev);
+		err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
+		if (err < 0) {
+			v4l2_fh_release(file);
+			goto done_open;
+		}
 		err = sh_vou_hw_init(vou_dev);
 		if (err < 0) {
 			pm_runtime_put(vou_dev->v4l2_dev.dev);
-- 
2.30.2

[PATCH AUTOSEL 4.14 07/25] media: cpia2: fix memory leak in cpia2_usb_probe

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]

syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cpia2/cpia2.h      |  1 +
 drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++
 drivers/media/usb/cpia2/cpia2_usb.c  | 13 +++++++------
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h
index 81f72c0b561f..7259d0f75ddf 100644
--- a/drivers/media/usb/cpia2/cpia2.h
+++ b/drivers/media/usb/cpia2/cpia2.h
@@ -438,6 +438,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
 int cpia2_do_command(struct camera_data *cam,
 		     unsigned int command,
 		     unsigned char direction, unsigned char param);
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf);
 struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf);
 int cpia2_init_camera(struct camera_data *cam);
 int cpia2_allocate_buffers(struct camera_data *cam);
diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c
index 0efba0da0a45..d82d6c1d7654 100644
--- a/drivers/media/usb/cpia2/cpia2_core.c
+++ b/drivers/media/usb/cpia2/cpia2_core.c
@@ -2172,6 +2172,18 @@ static void reset_camera_struct(struct camera_data *cam)
 	cam->height = cam->params.roi.height;
 }
 
+/******************************************************************************
+ *
+ *  cpia2_init_camera_struct
+ *
+ *  Deinitialize camera struct
+ *****************************************************************************/
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf)
+{
+	v4l2_device_unregister(&cam->v4l2_dev);
+	kfree(cam);
+}
+
 /******************************************************************************
  *
  *  cpia2_init_camera_struct
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 91b9eaa9b2ad..6475f992c2b2 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -852,15 +852,13 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = set_alternate(cam, USBIF_CMDONLY);
 	if (ret < 0) {
 		ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 
 	if((ret = cpia2_init_camera(cam)) < 0) {
 		ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 	LOG("  CPiA Version: %d.%02d (%d.%d)\n",
 	       cam->params.version.firmware_revision_hi,
@@ -880,11 +878,14 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = cpia2_register_camera(cam);
 	if (ret < 0) {
 		ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 	return 0;
+
+alt_err:
+	cpia2_deinit_camera_struct(cam, intf);
+	return ret;
 }
 
 /******************************************************************************
-- 
2.30.2

[PATCH AUTOSEL 4.14 08/25] media: cobalt: fix race condition in setting HPD

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]

The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.

This is used among other things for setting the HPD output pin.

But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.

Serialize this function with a mutex.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cobalt/cobalt-driver.c | 1 +
 drivers/media/pci/cobalt/cobalt-driver.h | 7 ++++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 98b6cb9505d1..0c827f488317 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -687,6 +687,7 @@ static int cobalt_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	cobalt->pci_dev = pci_dev;
 	cobalt->instance = i;
+	mutex_init(&cobalt->pci_lock);
 
 	retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev);
 	if (retval) {
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h
index 00f773ec359a..9f8db7eaa43c 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -262,6 +262,8 @@ struct cobalt {
 	int instance;
 	struct pci_dev *pci_dev;
 	struct v4l2_device v4l2_dev;
+	/* serialize PCI access in cobalt_s_bit_sysctrl() */
+	struct mutex pci_lock;
 
 	void __iomem *bar0, *bar1;
 
@@ -331,10 +333,13 @@ static inline u32 cobalt_g_sysctrl(struct cobalt *cobalt)
 static inline void cobalt_s_bit_sysctrl(struct cobalt *cobalt,
 					int bit, int val)
 {
-	u32 ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
+	u32 ctrl;
 
+	mutex_lock(&cobalt->pci_lock);
+	ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
 	cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE,
 			(ctrl & ~(1UL << bit)) | (val << bit));
+	mutex_unlock(&cobalt->pci_lock);
 }
 
 static inline u32 cobalt_g_sysstat(struct cobalt *cobalt)
-- 
2.30.2

[PATCH AUTOSEL 4.14 09/25] media: pvrusb2: fix warning in pvr2_i2c_core_done

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]

syzbot has reported the following warning in pvr2_i2c_done:

	sysfs group 'power' not found for kobject '1-0043'

When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.

To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.

Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index 18db7aaafcd6..fd1bd94cd78f 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2670,9 +2670,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
 		pvr2_stream_destroy(hdw->vid_stream);
 		hdw->vid_stream = NULL;
 	}
-	pvr2_i2c_core_done(hdw);
 	v4l2_device_unregister(&hdw->v4l2_dev);
-	pvr2_hdw_remove_usb_stuff(hdw);
+	pvr2_hdw_disconnect(hdw);
 	mutex_lock(&pvr2_unit_mtx);
 	do {
 		if ((hdw->unit_number >= 0) &&
@@ -2699,6 +2698,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
 {
 	pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
 	LOCK_TAKE(hdw->big_lock);
+	pvr2_i2c_core_done(hdw);
 	LOCK_TAKE(hdw->ctl_lock);
 	pvr2_hdw_remove_usb_stuff(hdw);
 	LOCK_GIVE(hdw->ctl_lock);
-- 
2.30.2

[PATCH AUTOSEL 4.14 12/25] media: em28xx: Fix possible memory leak of em28xx struct

[Sasha Levin]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

[ Upstream commit ac5688637144644f06ed1f3c6d4dd8bb7db96020 ]

The em28xx struct kref isn't being decreased after an error in the
em28xx_ir_init, leading to a possible memory leak.

A kref_put and em28xx_shutdown_buttons is added to the error handler code.

Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-input.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 046223de1e91..b8c94b4ad232 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -710,7 +710,8 @@ static int em28xx_ir_init(struct em28xx *dev)
 			dev->board.has_ir_i2c = 0;
 			dev_warn(&dev->intf->dev,
 				 "No i2c IR remote control device found.\n");
-			return -ENODEV;
+			err = -ENODEV;
+			goto ref_put;
 		}
 	}
 
@@ -725,7 +726,7 @@ static int em28xx_ir_init(struct em28xx *dev)
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	if (!ir)
-		return -ENOMEM;
+		goto ref_put;
 	rc = rc_allocate_device(RC_DRIVER_SCANCODE);
 	if (!rc)
 		goto error;
@@ -836,6 +837,9 @@ static int em28xx_ir_init(struct em28xx *dev)
 	dev->ir = NULL;
 	rc_free_device(rc);
 	kfree(ir);
+ref_put:
+	em28xx_shutdown_buttons(dev);
+	kref_put(&dev->ref, em28xx_free_device);
 	return err;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 13/25] media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release

[Sasha Levin]

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]

A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.

My patch sets the dangling pointer to NULL to provide
robust.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-fh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c
index c91a7bd3ecfc..ac8282d059fc 100644
--- a/drivers/media/v4l2-core/v4l2-fh.c
+++ b/drivers/media/v4l2-core/v4l2-fh.c
@@ -104,6 +104,7 @@ int v4l2_fh_release(struct file *filp)
 		v4l2_fh_del(fh);
 		v4l2_fh_exit(fh);
 		kfree(fh);
+		filp->private_data = NULL;
 	}
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 14/25] media: bt8xx: Fix a missing check bug in bt878_probe

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 1a4520090681853e6b850cbe54b27247a013e0e5 ]

In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is
set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'.
However, this two drivers are separate. The user may not load the
'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet
has not been initialized when 'tasklet_schedule' is called, so it is
necessary to check whether the tasklet is initialized in 'bt878_probe'.

Fix this by adding a check at the end of bt878_probe.

The KASAN's report reveals it:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177-
gdba4159c14ef-dirty #40
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522
 tasklet_action+0x50/0x70 kernel/softirq.c:540
 __do_softirq+0x224/0x92c kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:372 [inline]
 irq_exit+0x15a/0x180 kernel/softirq.c:412
 exiting_irq arch/x86/include/asm/apic.h:535 [inline]
 do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline]
RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline]
RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584
Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8
14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad
24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec
RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde
RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000
RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0
RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58
R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000
 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4692a9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f
RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60
R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: 0000000000000000
---[ end trace 68e5849c3f77cbb6 ]---
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index d4bc78b4fcb5..cbf855d78785 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -494,6 +494,9 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btwrite(0, BT878_AINT_MASK);
 	bt878_num++;
 
+	if (!bt->tasklet.func)
+		tasklet_disable(&bt->tasklet);
+
 	return 0;
 
       fail2:
-- 
2.30.2

[PATCH AUTOSEL 4.14 15/25] media: st-hva: Fix potential NULL pointer dereferences

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]

When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index 1185f6b6721e..3bb4d55c2058 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -130,8 +130,7 @@ static irqreturn_t hva_hw_its_irq_thread(int irq, void *arg)
 	ctx_id = (hva->sts_reg & 0xFF00) >> 8;
 	if (ctx_id >= HVA_MAX_INSTANCES) {
 		dev_err(dev, "%s     %s: bad context identifier: %d\n",
-			ctx->name, __func__, ctx_id);
-		ctx->hw_err = true;
+			HVA_PREFIX, __func__, ctx_id);
 		goto out;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 16/25] media: dvd_usb: memory leak in cinergyt2_fe_attach

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 9ad1efee086e0e913914fa2b2173efb830bad68c ]

When the driver fails to talk with the hardware with dvb_usb_generic_rw,
it will return an error to dvb_usb_adapter_frontend_init. However, the
driver forgets to free the resource (e.g., struct cinergyt2_fe_state),
which leads to a memory leak.

Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw
fails in cinergyt2_frontend_attach.

backtrace:
  [<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline]
  [<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline]
  [<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271
  [<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74
  [<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
  [<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline]
  [<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline]
  [<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287

Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/cinergyT2-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 6131aa7914a9..fb59dda7547a 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -88,6 +88,8 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 
 	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 	if (ret < 0) {
+		if (adap->fe_adap[0].fe)
+			adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe);
 		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
 	}
 	mutex_unlock(&d->data_mutex);
-- 
2.30.2

[PATCH AUTOSEL 4.14 19/25] media: dvb_net: avoid speculation from net slot

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]

The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).

(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.

Yet, fixing it is trivial.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index 06b0dcc13695..280f941ca97d 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -56,6 +56,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/nospec.h>
 #include <linux/etherdevice.h>
 #include <linux/dvb/net.h>
 #include <linux/uio.h>
@@ -1481,14 +1482,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct dvb_net_if *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (if_num >= DVB_NET_DEVICES_MAX) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		if (!dvbnet->state[if_num]) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
@@ -1541,14 +1548,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct __dvb_net_if_old *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
+
+		if (if_num >= DVB_NET_DEVICES_MAX) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (!dvbnet->state[if_num]) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
-- 
2.30.2

[PATCH AUTOSEL 4.14 20/25] media: siano: fix device register error path

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]

As reported by smatch:
	drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list

If an error occur at the end of the registration logic, it won't
drop the device from the list.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/siano/smsdvb-main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index 15e895c9f2e0..cbe5f08ae9ad 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -1187,6 +1187,10 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 	return 0;
 
 media_graph_error:
+	mutex_lock(&g_smsdvb_clientslock);
+	list_del(&client->entry);
+	mutex_unlock(&g_smsdvb_clientslock);
+
 	smsdvb_debugfs_release(client);
 
 client_error:
-- 
2.30.2