From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Yong Zhi <yong.zhi@intel.com>, Bingbu Cao <bingbu.cao@intel.com>,
Dan Scally <djrscally@gmail.com>,
Tianshu Qiu <tian.shu.qiu@intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v1 1/6] media: ipu3-cio2: Replace open-coded for_each_set_bit()
Date: Tue, 13 Jul 2021 23:21:26 +0300 [thread overview]
Message-ID: <20210713202131.13906-1-andriy.shevchenko@linux.intel.com> (raw)
Use for_each_set_bit() instead of open-coding it to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 75 +++++++++----------
1 file changed, 36 insertions(+), 39 deletions(-)
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index 9f75c9303416..5fb379e91071 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -11,6 +11,7 @@
* et al.
*/
+#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
@@ -612,6 +613,20 @@ static const char *const cio2_irq_errs[] = {
"non-matching Long Packet stalled",
};
+static void cio2_irq_log_irq_errs(struct device *dev, u8 port, u32 status)
+{
+ unsigned long csi2_status = status;
+ unsigned int i;
+
+ for_each_set_bit(i, &csi2_status, ARRAY_SIZE(cio2_irq_errs))
+ dev_err(dev, "CSI-2 receiver port %i: %s\n",
+ port, cio2_irq_errs[i]);
+
+ if (fls_long(csi2_status) >= ARRAY_SIZE(cio2_irq_errs))
+ dev_warn(dev, "unknown CSI2 error 0x%lx on port %i\n",
+ csi2_status, port);
+}
+
static const char *const cio2_port_errs[] = {
"ECC recoverable",
"DPHY not recoverable",
@@ -622,6 +637,15 @@ static const char *const cio2_port_errs[] = {
"PKT2LONG",
};
+static void cio2_irq_log_port_errs(struct device *dev, u8 port, u32 status)
+{
+ unsigned long port_status = status;
+ unsigned int i;
+
+ for_each_set_bit(i, &port_status, ARRAY_SIZE(cio2_port_errs))
+ dev_err(dev, "port %i error %s\n", port, cio2_port_errs[i]);
+}
+
static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status)
{
void __iomem *const base = cio2->base;
@@ -687,59 +711,32 @@ static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status)
if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) {
/* CSI2 receiver (error) interrupt */
- u32 ie_status, ie_clear;
unsigned int port;
+ u32 ie_status;
- ie_clear = readl(base + CIO2_REG_INT_STS_EXT_IE);
- ie_status = ie_clear;
+ ie_status = readl(base + CIO2_REG_INT_STS_EXT_IE);
for (port = 0; port < CIO2_NUM_PORTS; port++) {
u32 port_status = (ie_status >> (port * 8)) & 0xff;
- u32 err_mask = BIT_MASK(ARRAY_SIZE(cio2_port_errs)) - 1;
- void __iomem *const csi_rx_base =
- base + CIO2_REG_PIPE_BASE(port);
- unsigned int i;
-
- while (port_status & err_mask) {
- i = ffs(port_status) - 1;
- dev_err(dev, "port %i error %s\n",
- port, cio2_port_errs[i]);
- ie_status &= ~BIT(port * 8 + i);
- port_status &= ~BIT(i);
- }
+
+ cio2_irq_log_port_errs(dev, port, port_status);
if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) {
- u32 csi2_status, csi2_clear;
+ void __iomem *csi_rx_base =
+ base + CIO2_REG_PIPE_BASE(port);
+ u32 csi2_status;
csi2_status = readl(csi_rx_base +
CIO2_REG_IRQCTRL_STATUS);
- csi2_clear = csi2_status;
- err_mask =
- BIT_MASK(ARRAY_SIZE(cio2_irq_errs)) - 1;
-
- while (csi2_status & err_mask) {
- i = ffs(csi2_status) - 1;
- dev_err(dev,
- "CSI-2 receiver port %i: %s\n",
- port, cio2_irq_errs[i]);
- csi2_status &= ~BIT(i);
- }
-
- writel(csi2_clear,
- csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
- if (csi2_status)
- dev_warn(dev,
- "unknown CSI2 error 0x%x on port %i\n",
- csi2_status, port);
- ie_status &= ~CIO2_INT_EXT_IE_IRQ(port);
+ cio2_irq_log_irq_errs(dev, port, csi2_status);
+
+ writel(csi2_status,
+ csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
}
}
- writel(ie_clear, base + CIO2_REG_INT_STS_EXT_IE);
- if (ie_status)
- dev_warn(dev, "unknown interrupt 0x%x on IE\n",
- ie_status);
+ writel(ie_status, base + CIO2_REG_INT_STS_EXT_IE);
int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ);
}
--
2.30.2
next reply other threads:[~2021-07-13 20:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-13 20:21 Andy Shevchenko [this message]
2021-07-13 20:21 ` [PATCH v1 2/6] media: ipu3-cio2: Use temporary storage for struct device pointer Andy Shevchenko
2021-07-13 20:21 ` [PATCH v1 3/6] media: ipu3-cio2: Switch to use media_entity_to_video_device() Andy Shevchenko
2021-07-13 20:21 ` [PATCH v1 4/6] media: ipu3-cio2: Introduce to_sensor_asd() helper macro Andy Shevchenko
2021-07-13 20:21 ` [PATCH v1 5/6] media: ipu3-cio2: Introduce to_cio2_buffer() " Andy Shevchenko
2021-07-13 20:21 ` [PATCH v1 6/6] media: ipu3-cio2: Introduce to_cio2_device() " Andy Shevchenko
2021-08-04 16:23 ` [PATCH v1 1/6] media: ipu3-cio2: Replace open-coded for_each_set_bit() Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210713202131.13906-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=bingbu.cao@intel.com \
--cc=djrscally@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox