From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Zheyu Ma <zheyuma97@gmail.com>, Sean Young <sean@mess.org>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Sasha Levin <sashal@kernel.org>,
serjk@netup.ru, aospan@netup.ru, mchehab@kernel.org,
linux-media@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 039/146] media: netup_unidvb: handle interrupt properly according to the firmware
Date: Mon, 8 Nov 2021 12:43:06 -0500 [thread overview]
Message-ID: <20211108174453.1187052-39-sashal@kernel.org> (raw)
In-Reply-To: <20211108174453.1187052-1-sashal@kernel.org>
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit dbb4cfea6efe979ed153bd59a6a527a90d3d0ab3 ]
The interrupt handling should be related to the firmware version. If
the driver matches an old firmware, then the driver should not handle
interrupt such as i2c or dma, otherwise it will cause some errors.
This log reveals it:
[ 27.708641] INFO: trying to register non-static key.
[ 27.710851] The code is fine but needs lockdep annotation, or maybe
[ 27.712010] you didn't initialize this object before use?
[ 27.712396] turning off the locking correctness validator.
[ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.714149] Call Trace:
[ 27.714329] <IRQ>
[ 27.714480] dump_stack+0xba/0xf5
[ 27.714737] register_lock_class+0x873/0x8f0
[ 27.715052] ? __lock_acquire+0x323/0x1930
[ 27.715353] __lock_acquire+0x75/0x1930
[ 27.715636] lock_acquire+0x1dd/0x3e0
[ 27.715905] ? netup_i2c_interrupt+0x19/0x310
[ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60
[ 27.716544] ? netup_i2c_interrupt+0x19/0x310
[ 27.716863] netup_i2c_interrupt+0x19/0x310
[ 27.717178] netup_unidvb_isr+0xd3/0x160
[ 27.717467] __handle_irq_event_percpu+0x53/0x3e0
[ 27.717808] handle_irq_event_percpu+0x35/0x90
[ 27.718129] handle_irq_event+0x39/0x60
[ 27.718409] handle_fasteoi_irq+0xc2/0x1d0
[ 27.718707] __common_interrupt+0x7f/0x150
[ 27.719008] common_interrupt+0xb4/0xd0
[ 27.719289] </IRQ>
[ 27.719446] asm_common_interrupt+0x1e/0x40
[ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.724289] default_idle+0x9/0x10
[ 27.724537] arch_cpu_idle+0xa/0x10
[ 27.724791] default_idle_call+0x6e/0x250
[ 27.725082] do_idle+0x1f0/0x2d0
[ 27.725326] cpu_startup_entry+0x18/0x20
[ 27.725613] start_secondary+0x11f/0x160
[ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002
[ 27.726768] #PF: supervisor read access in kernel mode
[ 27.727138] #PF: error_code(0x0000) - not-present page
[ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0
[ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI
[ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.736744] Call Trace:
[ 27.736924] <IRQ>
[ 27.737074] netup_unidvb_isr+0xd3/0x160
[ 27.737363] __handle_irq_event_percpu+0x53/0x3e0
[ 27.737706] handle_irq_event_percpu+0x35/0x90
[ 27.738028] handle_irq_event+0x39/0x60
[ 27.738306] handle_fasteoi_irq+0xc2/0x1d0
[ 27.738602] __common_interrupt+0x7f/0x150
[ 27.738899] common_interrupt+0xb4/0xd0
[ 27.739176] </IRQ>
[ 27.739331] asm_common_interrupt+0x1e/0x40
[ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.744157] default_idle+0x9/0x10
[ 27.744405] arch_cpu_idle+0xa/0x10
[ 27.744658] default_idle_call+0x6e/0x250
[ 27.744948] do_idle+0x1f0/0x2d0
[ 27.745190] cpu_startup_entry+0x18/0x20
[ 27.745475] start_secondary+0x11f/0x160
[ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.746123] Modules linked in:
[ 27.746348] Dumping ftrace buffer:
[ 27.746596] (ftrace buffer empty)
[ 27.746852] CR2: 0000000000000002
[ 27.747094] ---[ end trace ebafd46f83ab946d ]---
[ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt
[ 27.755033] Dumping ftrace buffer:
[ 27.755279] (ftrace buffer empty)
[ 27.755534] Kernel Offset: disabled
[ 27.755785] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../pci/netup_unidvb/netup_unidvb_core.c | 27 +++++++++++--------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 6f3125c2d0976..77bae14685513 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -258,19 +258,24 @@ static irqreturn_t netup_unidvb_isr(int irq, void *dev_id)
if ((reg40 & AVL_IRQ_ASSERTED) != 0) {
/* IRQ is being signaled */
reg_isr = readw(ndev->bmmio0 + REG_ISR);
- if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
- iret = netup_i2c_interrupt(&ndev->i2c[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
- iret = netup_i2c_interrupt(&ndev->i2c[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_SPI) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_SPI)
iret = netup_spi_interrupt(ndev->spi);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
- iret = netup_dma_interrupt(&ndev->dma[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
- iret = netup_dma_interrupt(&ndev->dma[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
- iret = netup_ci_interrupt(ndev);
+ else if (!ndev->old_fw) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
+ iret = netup_i2c_interrupt(&ndev->i2c[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
+ iret = netup_i2c_interrupt(&ndev->i2c[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
+ iret = netup_dma_interrupt(&ndev->dma[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
+ iret = netup_dma_interrupt(&ndev->dma[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
+ iret = netup_ci_interrupt(ndev);
+ } else {
+ goto err;
+ }
} else {
+err:
dev_err(&pci_dev->dev,
"%s(): unknown interrupt 0x%x\n",
__func__, reg_isr);
--
2.33.0
next prev parent reply other threads:[~2021-11-09 1:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-08 17:42 [PATCH AUTOSEL 5.15 001/146] dma-buf: WARN on dmabuf release with pending attachments Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 038/146] media: mt9p031: Fix corrupted frame after restarting stream Sasha Levin
2021-11-08 17:43 ` Sasha Levin [this message]
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 040/146] media: atomisp: Fix error handling in probe Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 041/146] media: stm32: Potential NULL pointer dereference in dcmi_irq_thread() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 042/146] media: uvcvideo: Set capability in s_param Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 043/146] media: uvcvideo: Return -EIO for control errors Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 044/146] media: uvcvideo: Set unique vdev name based in type Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 045/146] media: vidtv: Fix memory leak in remove Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 046/146] media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 047/146] media: s5p-mfc: Add checking to s5p_mfc_probe() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 048/146] media: videobuf2: rework vb2_mem_ops API Sasha Levin
2021-11-09 7:54 ` AUTOSEL series truncated was -- Re: [PATCH AUTOSEL 5.15 001/146] dma-buf: WARN on dmabuf release with pending attachments Pavel Machek
2021-11-09 8:07 ` Christian König
2021-11-09 16:05 ` Randy Dunlap
2021-11-14 14:25 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108174453.1187052-39-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=aospan@netup.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=sean@mess.org \
--cc=serjk@netup.ru \
--cc=stable@vger.kernel.org \
--cc=zheyuma97@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox