From: Daniel Scally <djrscally@gmail.com>
To: linux-media@vger.kernel.org
Cc: yong.zhi@intel.com, sakari.ailus@linux.intel.com,
bingbu.cao@intel.com, tian.shu.qiu@intel.com,
andriy.shevchenko@linux.intel.com, hverkuil-cisco@xs4all.nl
Subject: [PATCH v3 02/15] media: ipu3-cio2: Add support for V4L2_PIX_FMT_IPU3_Y10
Date: Wed, 4 May 2022 23:30:14 +0100 [thread overview]
Message-ID: <20220504223027.3480287-3-djrscally@gmail.com> (raw)
In-Reply-To: <20220504223027.3480287-1-djrscally@gmail.com>
We have platforms where a camera sensor transmits Y10 data to
the CIO2 device - add support for that (packed) format to the
ipu3-cio2 driver.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
Changes in v3:
- None
Changes in v2:
- None
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index 0e9b0503b62a..93cc0577b6db 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -65,6 +65,11 @@ static const struct ipu3_cio2_fmt formats[] = {
.fourcc = V4L2_PIX_FMT_IPU3_SRGGB10,
.mipicode = 0x2b,
.bpp = 10,
+ }, {
+ .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
+ .fourcc = V4L2_PIX_FMT_IPU3_Y10,
+ .mipicode = 0x2b,
+ .bpp = 10,
},
};
--
2.25.1
next prev parent reply other threads:[~2022-05-04 22:30 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 22:30 [PATCH v3 00/15] Support OVTI7251 on Microsoft Surface line Daniel Scally
2022-05-04 22:30 ` [PATCH v3 01/15] media: uapi: Add IPU3 packed Y10 format Daniel Scally
2022-05-04 22:30 ` Daniel Scally [this message]
2022-05-04 22:30 ` [PATCH v3 03/15] media: i2c: Add acpi support to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 04/15] media: i2c: Provide ov7251_check_hwcfg() Daniel Scally
2022-05-05 10:16 ` Andy Shevchenko
2022-05-05 10:41 ` Daniel Scally
2022-05-04 22:30 ` [PATCH v3 05/15] media: i2c: Remove per-mode frequencies from ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 06/15] media: i2c: Add ov7251_pll_configure() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 07/15] media: i2c: Add support for new frequencies to ov7251 Daniel Scally
2022-05-05 12:49 ` kernel test robot
2022-05-04 22:30 ` [PATCH v3 08/15] media: i2c: Add ov7251_detect_chip() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 09/15] media: i2c: Add pm_runtime support to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 10/15] media: i2c: Remove .s_power() from ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 11/15] media: ipu3-cio2: Add INT347E to cio2-bridge Daniel Scally
2022-05-04 22:30 ` [PATCH v3 12/15] media: i2c: Extend .get_selection() for ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 13/15] media: i2c: add ov7251_init_ctrls() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 14/15] media: i2c: Add hblank control to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 15/15] media: i2c: Add vblank control to ov7251 driver Daniel Scally
2022-05-05 1:02 ` kernel test robot
2022-05-05 8:04 ` Daniel Scally
2022-05-05 8:32 ` Sakari Ailus
2022-05-05 9:10 ` Daniel Scally
2022-05-05 10:31 ` Andy Shevchenko
2022-05-05 22:04 ` Daniel Scally
2022-05-06 21:22 ` Andy Shevchenko
2022-05-05 17:11 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220504223027.3480287-3-djrscally@gmail.com \
--to=djrscally@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bingbu.cao@intel.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox