public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Daniel Scally <djrscally@gmail.com>
To: linux-media@vger.kernel.org
Cc: yong.zhi@intel.com, sakari.ailus@linux.intel.com,
	bingbu.cao@intel.com, tian.shu.qiu@intel.com,
	andriy.shevchenko@linux.intel.com, hverkuil-cisco@xs4all.nl
Subject: [PATCH v4 05/15] media: i2c: Remove per-mode frequencies from ov7251
Date: Fri,  6 May 2022 00:03:52 +0100	[thread overview]
Message-ID: <20220505230402.449643-6-djrscally@gmail.com> (raw)
In-Reply-To: <20220505230402.449643-1-djrscally@gmail.com>

Each of the defined modes in the ov7251 driver uses the same link
frequency and pixel rate; just drop those members of the modes and
set the controls to read only during initialisation. Add a new
table defining the supported pixel rates to substitue for the values
hardcoded in the modes.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
Changes in v4:

	- None

Changes in v3:

	- None

Changes in v2:

	- New patch

 drivers/media/i2c/ov7251.c | 43 +++++++++++++-------------------------
 1 file changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c
index 177b99eef3a5..4f51e6258988 100644
--- a/drivers/media/i2c/ov7251.c
+++ b/drivers/media/i2c/ov7251.c
@@ -526,7 +526,11 @@ static const struct reg_value ov7251_setting_vga_90fps[] = {
 };
 
 static const s64 link_freq[] = {
-	240000000,
+	[OV7251_LINK_FREQ_240_MHZ] = 240000000,
+};
+
+static const s64 pixel_rates[] = {
+	[OV7251_LINK_FREQ_240_MHZ] = 48000000,
 };
 
 static const struct ov7251_mode_info ov7251_mode_info_data[] = {
@@ -535,8 +539,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
 		.height = 480,
 		.data = ov7251_setting_vga_30fps,
 		.data_size = ARRAY_SIZE(ov7251_setting_vga_30fps),
-		.pixel_clock = 48000000,
-		.link_freq = 0, /* an index in link_freq[] */
 		.exposure_max = 1704,
 		.exposure_def = 504,
 		.timeperframe = {
@@ -549,8 +551,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
 		.height = 480,
 		.data = ov7251_setting_vga_60fps,
 		.data_size = ARRAY_SIZE(ov7251_setting_vga_60fps),
-		.pixel_clock = 48000000,
-		.link_freq = 0, /* an index in link_freq[] */
 		.exposure_max = 840,
 		.exposure_def = 504,
 		.timeperframe = {
@@ -563,8 +563,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
 		.height = 480,
 		.data = ov7251_setting_vga_90fps,
 		.data_size = ARRAY_SIZE(ov7251_setting_vga_90fps),
-		.pixel_clock = 48000000,
-		.link_freq = 0, /* an index in link_freq[] */
 		.exposure_max = 552,
 		.exposure_def = 504,
 		.timeperframe = {
@@ -1059,16 +1057,6 @@ static int ov7251_set_format(struct v4l2_subdev *sd,
 	__crop->height = new_mode->height;
 
 	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
-					       new_mode->pixel_clock);
-		if (ret < 0)
-			goto exit;
-
-		ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
-					 new_mode->link_freq);
-		if (ret < 0)
-			goto exit;
-
 		ret = __v4l2_ctrl_modify_range(ov7251->exposure,
 					       1, new_mode->exposure_max,
 					       1, new_mode->exposure_def);
@@ -1199,16 +1187,6 @@ static int ov7251_set_frame_interval(struct v4l2_subdev *subdev,
 	new_mode = ov7251_find_mode_by_ival(ov7251, &fi->interval);
 
 	if (new_mode != ov7251->current_mode) {
-		ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
-					       new_mode->pixel_clock);
-		if (ret < 0)
-			goto exit;
-
-		ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
-					 new_mode->link_freq);
-		if (ret < 0)
-			goto exit;
-
 		ret = __v4l2_ctrl_modify_range(ov7251->exposure,
 					       1, new_mode->exposure_max,
 					       1, new_mode->exposure_def);
@@ -1315,6 +1293,7 @@ static int ov7251_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct ov7251 *ov7251;
 	u8 chip_id_high, chip_id_low, chip_rev;
+	s64 pixel_rate;
 	int ret;
 
 	ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL);
@@ -1396,17 +1375,23 @@ static int ov7251_probe(struct i2c_client *client)
 				     V4L2_CID_TEST_PATTERN,
 				     ARRAY_SIZE(ov7251_test_pattern_menu) - 1,
 				     0, 0, ov7251_test_pattern_menu);
+
+	pixel_rate = pixel_rates[ov7251->link_freq_idx];
 	ov7251->pixel_clock = v4l2_ctrl_new_std(&ov7251->ctrls,
 						&ov7251_ctrl_ops,
 						V4L2_CID_PIXEL_RATE,
-						1, INT_MAX, 1, 1);
+						pixel_rate, INT_MAX,
+						pixel_rate, pixel_rate);
 	ov7251->link_freq = v4l2_ctrl_new_int_menu(&ov7251->ctrls,
 						   &ov7251_ctrl_ops,
 						   V4L2_CID_LINK_FREQ,
 						   ARRAY_SIZE(link_freq) - 1,
-						   0, link_freq);
+						   ov7251->link_freq_idx,
+						   link_freq);
 	if (ov7251->link_freq)
 		ov7251->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+	if (ov7251->pixel_clock)
+		ov7251->pixel_clock->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
 	ov7251->sd.ctrl_handler = &ov7251->ctrls;
 
-- 
2.25.1


  parent reply	other threads:[~2022-05-05 23:04 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-05 23:03 [PATCH v4 00/15] Support OVTI7251 on Microsoft Surface line Daniel Scally
2022-05-05 23:03 ` [PATCH v4 01/15] media: uapi: Add IPU3 packed Y10 format Daniel Scally
2022-05-05 23:03 ` [PATCH v4 02/15] media: ipu3-cio2: Add support for V4L2_PIX_FMT_IPU3_Y10 Daniel Scally
2022-05-05 23:03 ` [PATCH v4 03/15] media: i2c: Add acpi support to ov7251 Daniel Scally
2022-05-05 23:03 ` [PATCH v4 04/15] media: i2c: Provide ov7251_check_hwcfg() Daniel Scally
2022-05-05 23:03 ` Daniel Scally [this message]
2022-05-05 23:03 ` [PATCH v4 06/15] media: i2c: Add ov7251_pll_configure() Daniel Scally
2022-05-05 23:03 ` [PATCH v4 07/15] media: i2c: Add support for new frequencies to ov7251 Daniel Scally
2022-05-05 23:03 ` [PATCH v4 08/15] media: i2c: Add ov7251_detect_chip() Daniel Scally
2022-05-05 23:03 ` [PATCH v4 09/15] media: i2c: Add pm_runtime support to ov7251 Daniel Scally
2022-05-05 23:03 ` [PATCH v4 10/15] media: i2c: Remove .s_power() from ov7251 Daniel Scally
2022-05-05 23:03 ` [PATCH v4 11/15] media: ipu3-cio2: Add INT347E to cio2-bridge Daniel Scally
2022-05-05 23:03 ` [PATCH v4 12/15] media: i2c: Extend .get_selection() for ov7251 Daniel Scally
2022-05-05 23:04 ` [PATCH v4 13/15] media: i2c: add ov7251_init_ctrls() Daniel Scally
2022-05-05 23:04 ` [PATCH v4 14/15] media: i2c: Add hblank control to ov7251 Daniel Scally
2022-05-05 23:04 ` [PATCH v4 15/15] media: i2c: Add vblank control to ov7251 driver Daniel Scally
2022-05-06 22:37 ` [PATCH v4 00/15] Support OVTI7251 on Microsoft Surface line Andy Shevchenko
2022-05-06 22:45   ` Daniel Scally

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220505230402.449643-6-djrscally@gmail.com \
    --to=djrscally@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bingbu.cao@intel.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tian.shu.qiu@intel.com \
    --cc=yong.zhi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox