From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Steve Longerbeam <slongerbeam@gmail.com>,
laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, paul.elder@ideasonboard.com,
eddy.khan@vergesense.com,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data
Date: Fri, 13 May 2022 17:15:34 +0300 [thread overview]
Message-ID: <20220513141548.6344-15-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>
From: Jacopo Mondi <jacopo@jmondi.org>
The ov5640_mode_init_data is a fictional sensor more which is used to
program the initial sensor settings.
It is only used to initialize the sensor and can be replaced
it with a throw-away mode which just wraps the register table.
Also rename the register table to drop the format from the name to make
it clear an actual sensor mode has to be applied after the initial
programming.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov5640.c | 67 ++++++--------------------------------
1 file changed, 10 insertions(+), 57 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 92fc2abc18f83..c94a04ec679c8 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -404,7 +404,7 @@ static u32 ov5640_code_to_bpp(u32 code)
* over i2c.
*/
/* YUV422 UYVY VGA@30fps */
-static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
+static const struct reg_value ov5640_init_setting[] = {
{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
{0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
@@ -552,50 +552,6 @@ static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 70},
};
-/* power-on sensor init reg table */
-static const struct ov5640_mode_info ov5640_mode_init_data = {
- .id = 0,
- .dn_mode = SUBSAMPLING,
- .pixel_rate = OV5640_PIXEL_RATE_96M,
- .width = 640,
- .height = 480,
- .dvp_timings = {
- .analog_crop = {
- .left = 0,
- .top = 4,
- .width = 2624,
- .height = 1944,
- },
- .crop = {
- .left = 16,
- .top = 6,
- .width = 640,
- .height = 480,
- },
- .htot = 1896,
- .vblank_def = 504,
- },
- .csi2_timings = {
- .analog_crop = {
- .left = OV5640_PIXEL_ARRAY_LEFT,
- .top = OV5640_PIXEL_ARRAY_TOP,
- .width = OV5640_PIXEL_ARRAY_WIDTH,
- .height = OV5640_PIXEL_ARRAY_HEIGHT,
- },
- .crop = {
- .left = 2,
- .top = 4,
- .width = 640,
- .height = 480,
- },
- .htot = 1896,
- .vblank_def = 504,
- },
- .reg_data = ov5640_init_setting_30fps_VGA,
- .reg_data_size = ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
- .max_fps = OV5640_30_FPS
-};
-
static const struct ov5640_mode_info ov5640_mode_data[OV5640_NUM_MODES] = {
{
/* 160x120 */
@@ -1607,17 +1563,16 @@ static int ov5640_set_timings(struct ov5640_dev *sensor,
return 0;
}
-static int ov5640_load_regs(struct ov5640_dev *sensor,
- const struct ov5640_mode_info *mode)
+static void ov5640_load_regs(struct ov5640_dev *sensor,
+ const struct reg_value *regs, unsigned int regnum)
{
- const struct reg_value *regs = mode->reg_data;
unsigned int i;
u32 delay_ms;
u16 reg_addr;
u8 mask, val;
int ret = 0;
- for (i = 0; i < mode->reg_data_size; ++i, ++regs) {
+ for (i = 0; i < regnum; ++i, ++regs) {
delay_ms = regs->delay_ms;
reg_addr = regs->reg_addr;
val = regs->val;
@@ -1639,8 +1594,6 @@ static int ov5640_load_regs(struct ov5640_dev *sensor,
if (delay_ms)
usleep_range(1000 * delay_ms, 1000 * delay_ms + 100);
}
-
- return ov5640_set_timings(sensor, mode);
}
static int ov5640_set_autoexposure(struct ov5640_dev *sensor, bool on)
@@ -2093,7 +2046,8 @@ static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor,
return ret;
/* Write capture setting */
- ret = ov5640_load_regs(sensor, mode);
+ ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size);
+ ret = ov5640_set_timings(sensor, mode);
if (ret < 0)
return ret;
@@ -2217,7 +2171,8 @@ static int ov5640_set_mode_direct(struct ov5640_dev *sensor,
return -EINVAL;
/* Write capture setting */
- return ov5640_load_regs(sensor, mode);
+ ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size);
+ return ov5640_set_timings(sensor, mode);
}
static int ov5640_set_mode(struct ov5640_dev *sensor)
@@ -2315,10 +2270,8 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor)
int ret;
/* first load the initial register values */
- ret = ov5640_load_regs(sensor, &ov5640_mode_init_data);
- if (ret < 0)
- return ret;
- sensor->last_mode = &ov5640_mode_init_data;
+ ov5640_load_regs(sensor, ov5640_init_setting,
+ ARRAY_SIZE(ov5640_init_setting));
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
(ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
--
2.30.2
next prev parent reply other threads:[~2022-05-13 14:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
-- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:14 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513141548.6344-15-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=eddy.khan@vergesense.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=paul.elder@ideasonboard.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox