From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Steve Longerbeam <slongerbeam@gmail.com>,
laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, paul.elder@ideasonboard.com,
eddy.khan@vergesense.com,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats
Date: Fri, 13 May 2022 17:15:47 +0300 [thread overview]
Message-ID: <20220513141548.6344-28-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>
From: Jacopo Mondi <jacopo@jmondi.org>
The format enumeration list is shared between CSI-2 and DVP modes.
This lead to the enumeration of unsupported format variants in both
modes.
Separate the list of DVP and CSI-2 formats and create helpers to access
the correct one.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov5640.c | 112 +++++++++++++++++++++++++++----------
1 file changed, 83 insertions(+), 29 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 3186727457bde..44f26d5cf029c 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -188,11 +188,13 @@ enum ov5640_format_mux {
OV5640_FMT_MUX_RAW_CIP,
};
-static const struct ov5640_pixfmt {
+struct ov5640_pixfmt {
u32 code;
u32 colorspace;
u8 bpp;
-} ov5640_formats[] = {
+};
+
+static const struct ov5640_pixfmt ov5640_dvp_formats[] = {
{
.code = MEDIA_BUS_FMT_JPEG_1X8,
.colorspace = V4L2_COLORSPACE_JPEG,
@@ -202,23 +204,48 @@ static const struct ov5640_pixfmt {
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 16,
}, {
- .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 16,
}, {
- .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 16,
}, {
- .code = MEDIA_BUS_FMT_YUYV8_1X16,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 16,
}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
.colorspace = V4L2_COLORSPACE_SRGB,
+ .bpp = 8,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .bpp = 8
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .bpp = 8,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .bpp = 8,
+ },
+ { /* sentinel */ }
+};
+
+static const struct ov5640_pixfmt ov5640_csi2_formats[] = {
+ {
+ .code = MEDIA_BUS_FMT_JPEG_1X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
.bpp = 16,
}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .bpp = 16,
+ }, {
+ .code = MEDIA_BUS_FMT_YUYV8_1X16,
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 16,
}, {
@@ -246,6 +273,7 @@ static const struct ov5640_pixfmt {
.colorspace = V4L2_COLORSPACE_SRGB,
.bpp = 8,
},
+ { /* sentinel */ }
};
/*
@@ -399,16 +427,33 @@ static inline bool ov5640_is_csi2(const struct ov5640_dev *sensor)
return sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY;
}
-static u32 ov5640_code_to_bpp(u32 code)
+static inline const struct ov5640_pixfmt *
+ov5640_formats(struct ov5640_dev *sensor)
+{
+ return ov5640_is_csi2(sensor) ? ov5640_csi2_formats
+ : ov5640_dvp_formats;
+}
+
+static const struct ov5640_pixfmt *
+ov5640_code_to_pixfmt(struct ov5640_dev *sensor, u32 code)
{
+ const struct ov5640_pixfmt *formats = ov5640_formats(sensor);
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(ov5640_formats); ++i) {
- if (ov5640_formats[i].code == code)
- return ov5640_formats[i].bpp;
+ for (i = 0; formats[i].code; ++i) {
+ if (formats[i].code == code)
+ return &formats[i];
}
- return 0;
+ return &formats[0];
+}
+
+static u32 ov5640_code_to_bpp(struct ov5640_dev *sensor, u32 code)
+{
+ const struct ov5640_pixfmt *format = ov5640_code_to_pixfmt(sensor,
+ code);
+
+ return format->bpp;
}
/*
@@ -1472,7 +1517,7 @@ static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor)
int ret;
rate = ov5640_calc_pixel_rate(sensor);
- rate *= ov5640_code_to_bpp(sensor->fmt.code);
+ rate *= ov5640_code_to_bpp(sensor, sensor->fmt.code);
rate /= sensor->ep.bus.parallel.bus_width;
ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
@@ -2698,15 +2743,18 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
enum ov5640_frame_rate fr,
const struct ov5640_mode_info **new_mode)
{
- unsigned int bpp = ov5640_code_to_bpp(fmt->code);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *mode;
- int i;
+ const struct ov5640_pixfmt *pixfmt;
+ unsigned int bpp;
mode = ov5640_find_mode(sensor, fmt->width, fmt->height, true);
if (!mode)
return -EINVAL;
+ pixfmt = ov5640_code_to_pixfmt(sensor, fmt->code);
+ bpp = pixfmt->bpp;
+
/*
* Adjust mode according to bpp:
* - 8bpp modes work for resolution >= 1280x720
@@ -2723,14 +2771,8 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
if (new_mode)
*new_mode = mode;
- for (i = 0; i < ARRAY_SIZE(ov5640_formats); i++)
- if (ov5640_formats[i].code == fmt->code)
- break;
- if (i >= ARRAY_SIZE(ov5640_formats))
- i = 0;
-
- fmt->code = ov5640_formats[i].code;
- fmt->colorspace = ov5640_formats[i].colorspace;
+ fmt->code = pixfmt->code;
+ fmt->colorspace = pixfmt->colorspace;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
@@ -2773,7 +2815,7 @@ static int ov5640_update_pixel_rate(struct ov5640_dev *sensor)
* progressively slow it down if it exceeds 1GHz.
*/
num_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes;
- bpp = ov5640_code_to_bpp(fmt->code);
+ bpp = ov5640_code_to_bpp(sensor, fmt->code);
do {
pixel_rate = ov5640_pixel_rates[pixel_rate_id];
link_freq = pixel_rate * bpp / (2 * num_lanes);
@@ -3486,7 +3528,8 @@ static int ov5640_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
- u32 bpp = ov5640_code_to_bpp(fse->code);
+ struct ov5640_dev *sensor = to_ov5640_dev(sd);
+ u32 bpp = ov5640_code_to_bpp(sensor, fse->code);
unsigned int index = fse->index;
if (fse->pad != 0)
@@ -3608,12 +3651,23 @@ static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
- if (code->pad != 0)
- return -EINVAL;
- if (code->index >= ARRAY_SIZE(ov5640_formats))
+ struct ov5640_dev *sensor = to_ov5640_dev(sd);
+ const struct ov5640_pixfmt *formats;
+ unsigned int num_formats;
+
+ if (ov5640_is_csi2(sensor)) {
+ formats = ov5640_csi2_formats;
+ num_formats = ARRAY_SIZE(ov5640_csi2_formats) - 1;
+ } else {
+ formats = ov5640_dvp_formats;
+ num_formats = ARRAY_SIZE(ov5640_dvp_formats) - 1;
+ }
+
+ if (code->index >= num_formats)
return -EINVAL;
- code->code = ov5640_formats[code->index].code;
+ code->code = formats[code->index].code;
+
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2022-05-13 14:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
-- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:14 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513141548.6344-28-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=eddy.khan@vergesense.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=paul.elder@ideasonboard.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox