From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Steve Longerbeam <slongerbeam@gmail.com>,
laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, paul.elder@ideasonboard.com,
eddy.khan@vergesense.com,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control
Date: Fri, 13 May 2022 17:15:25 +0300 [thread overview]
Message-ID: <20220513141548.6344-6-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>
From: Jacopo Mondi <jacopo@jmondi.org>
Add the V4L2_CID_LINK_FREQ control to the ov5640 driver.
Make the control read-only for the moment.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov5640.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 297ed135c4768..aa1d2e7fb8190 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -141,6 +141,24 @@ static const u32 ov5640_pixel_rates[] = {
[OV5640_PIXEL_RATE_48M] = 48000000,
};
+/*
+ * MIPI CSI-2 link frequencies.
+ *
+ * Derived from the above defined pixel rate for bpp = (8, 16, 24) and
+ * data_lanes = (1, 2)
+ *
+ * link_freq = (pixel_rate * bpp) / (2 * data_lanes)
+ */
+static const s64 ov5640_csi2_link_freqs[] = {
+ 992000000, 888000000, 768000000, 744000000, 672000000, 672000000,
+ 592000000, 592000000, 576000000, 576000000, 496000000, 496000000,
+ 384000000, 384000000, 384000000, 336000000, 296000000, 288000000,
+ 248000000, 192000000, 192000000, 192000000, 96000000,
+};
+
+/* Link freq for default mode: UYVY 16 bpp, 2 data lanes. */
+#define OV5640_DEFAULT_LINK_FREQ 13
+
enum ov5640_format_mux {
OV5640_FMT_MUX_YUV422 = 0,
OV5640_FMT_MUX_RGB,
@@ -258,6 +276,7 @@ struct ov5640_mode_info {
struct ov5640_ctrls {
struct v4l2_ctrl_handler handler;
struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
struct {
struct v4l2_ctrl *auto_exp;
struct v4l2_ctrl *exposure;
@@ -2855,6 +2874,12 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
ov5640_pixel_rates[0], 1,
ov5640_pixel_rates[mode->pixel_rate]);
+ ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(ov5640_csi2_link_freqs) - 1,
+ OV5640_DEFAULT_LINK_FREQ,
+ ov5640_csi2_link_freqs);
+
/* Auto/manual white balance */
ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
V4L2_CID_AUTO_WHITE_BALANCE,
@@ -2903,6 +2928,7 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
}
ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
--
2.30.2
next prev parent reply other threads:[~2022-05-13 14:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
-- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:13 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513141548.6344-6-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=eddy.khan@vergesense.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=paul.elder@ideasonboard.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox