From: Smitha T Murthy <smitha.t@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: m.szyprowski@samsung.com, andrzej.hajda@intel.com,
mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
ezequiel@vanguardiasur.com.ar, jernej.skrabec@gmail.com,
benjamin.gaignard@collabora.com, stanimir.varbanov@linaro.org,
dillon.minfei@gmail.com, david.plowman@raspberrypi.com,
mark.rutland@arm.com, robh+dt@kernel.org, krzk+dt@kernel.org,
andi@etezian.org, alim.akhtar@samsung.com,
aswani.reddy@samsung.com, pankaj.dubey@samsung.com,
Smitha T Murthy <smitha.t@samsung.com>,
linux-fsd@tesla.com
Subject: [PATCH 04/20] media: s5p-mfc: Rename IS_MFCV10 macro
Date: Tue, 17 May 2022 18:25:32 +0530 [thread overview]
Message-ID: <20220517125548.14746-5-smitha.t@samsung.com> (raw)
In-Reply-To: <20220517125548.14746-1-smitha.t@samsung.com>
Renames macro IS_MFCV10 to IS_MFCV10_PLUS so that the MFCv10
code can be resued for MFCv12 support. Since some part of MFCv10
specific code holds good for MFCv12 also.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
.../platform/samsung/s5p-mfc/s5p_mfc_common.h | 4 +--
.../platform/samsung/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
.../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c | 28 +++++++++----------
3 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
index 5304f42c8c72..ae266d8518d1 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_common.h
@@ -774,8 +774,8 @@ void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq);
#define IS_MFCV6_PLUS(dev) (dev->variant->version >= 0x60 ? 1 : 0)
#define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70 ? 1 : 0)
#define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80 ? 1 : 0)
-#define IS_MFCV10(dev) (dev->variant->version >= 0xA0 ? 1 : 0)
-#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10(dev))
+#define IS_MFCV10_PLUS(dev) (dev->variant->version >= 0xA0 ? 1 : 0)
+#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10_PLUS(dev))
#define MFC_V5_BIT BIT(0)
#define MFC_V6_BIT BIT(1)
diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
index 72d70984e99a..ffe9f7e79eca 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
@@ -236,7 +236,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
else
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_write(dev, 0x0, S5P_FIMV_MFC_CLOCK_OFF_V10);
mfc_debug(2, "Will now wait for completion of firmware transfer\n");
diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
index 8227004f6746..728d255e65fc 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
@@ -72,9 +72,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
ctx->luma_size, ctx->chroma_size, ctx->mv_size);
mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count);
} else if (ctx->type == MFCINST_ENCODER) {
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev))
ctx->tmv_buffer_size = 0;
- } else if (IS_MFCV8_PLUS(dev))
+ else if (IS_MFCV8_PLUS(dev))
ctx->tmv_buffer_size = S5P_FIMV_NUM_TMV_BUFFERS_V6 *
ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V8(mb_width, mb_height),
S5P_FIMV_TMV_BUFFER_ALIGN_V6);
@@ -82,7 +82,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
ctx->tmv_buffer_size = S5P_FIMV_NUM_TMV_BUFFERS_V6 *
ALIGN(S5P_FIMV_TMV_BUFFER_SIZE_V6(mb_width, mb_height),
S5P_FIMV_TMV_BUFFER_ALIGN_V6);
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
lcu_width = S5P_MFC_LCU_WIDTH(ctx->img_width);
lcu_height = S5P_MFC_LCU_HEIGHT(ctx->img_height);
if (ctx->codec_mode != S5P_FIMV_CODEC_HEVC_ENC) {
@@ -133,7 +133,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
switch (ctx->codec_mode) {
case S5P_MFC_CODEC_H264_DEC:
case S5P_MFC_CODEC_H264_MVC_DEC:
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_debug(2, "Use min scratch buffer size\n");
else if (IS_MFCV8_PLUS(dev))
ctx->scratch_buf_size =
@@ -152,7 +152,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
(ctx->mv_count * ctx->mv_size);
break;
case S5P_MFC_CODEC_MPEG4_DEC:
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_debug(2, "Use min scratch buffer size\n");
else if (IS_MFCV7_PLUS(dev)) {
ctx->scratch_buf_size =
@@ -172,7 +172,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
break;
case S5P_MFC_CODEC_VC1RCV_DEC:
case S5P_MFC_CODEC_VC1_DEC:
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_debug(2, "Use min scratch buffer size\n");
else
ctx->scratch_buf_size =
@@ -189,7 +189,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
ctx->bank2.size = 0;
break;
case S5P_MFC_CODEC_H263_DEC:
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_debug(2, "Use min scratch buffer size\n");
else
ctx->scratch_buf_size =
@@ -201,7 +201,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
ctx->bank1.size = ctx->scratch_buf_size;
break;
case S5P_MFC_CODEC_VP8_DEC:
- if (IS_MFCV10(dev))
+ if (IS_MFCV10_PLUS(dev))
mfc_debug(2, "Use min scratch buffer size\n");
else if (IS_MFCV8_PLUS(dev))
ctx->scratch_buf_size =
@@ -230,7 +230,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
DEC_VP9_STATIC_BUFFER_SIZE;
break;
case S5P_MFC_CODEC_H264_ENC:
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
mfc_debug(2, "Use min scratch buffer size\n");
ctx->me_buffer_size =
ALIGN(ENC_V100_H264_ME_SIZE(mb_width, mb_height), 16);
@@ -254,7 +254,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
break;
case S5P_MFC_CODEC_MPEG4_ENC:
case S5P_MFC_CODEC_H263_ENC:
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
mfc_debug(2, "Use min scratch buffer size\n");
ctx->me_buffer_size =
ALIGN(ENC_V100_MPEG4_ME_SIZE(mb_width,
@@ -273,7 +273,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
ctx->bank2.size = 0;
break;
case S5P_MFC_CODEC_VP8_ENC:
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
mfc_debug(2, "Use min scratch buffer size\n");
ctx->me_buffer_size =
ALIGN(ENC_V100_VP8_ME_SIZE(mb_width, mb_height),
@@ -452,7 +452,7 @@ static void s5p_mfc_dec_calc_dpb_size_v6(struct s5p_mfc_ctx *ctx)
if (ctx->codec_mode == S5P_MFC_CODEC_H264_DEC ||
ctx->codec_mode == S5P_MFC_CODEC_H264_MVC_DEC) {
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
ctx->mv_size = S5P_MFC_DEC_MV_SIZE_V10(ctx->img_width,
ctx->img_height);
} else {
@@ -668,7 +668,7 @@ static int s5p_mfc_set_enc_ref_buffer_v6(struct s5p_mfc_ctx *ctx)
mfc_debug(2, "Buf1: %p (%d)\n", (void *)buf_addr1, buf_size1);
- if (IS_MFCV10(dev)) {
+ if (IS_MFCV10_PLUS(dev)) {
/* start address of per buffer is aligned */
for (i = 0; i < ctx->pb_count; i++) {
writel(buf_addr1, mfc_regs->e_luma_dpb + (4 * i));
@@ -2455,7 +2455,7 @@ const struct s5p_mfc_regs *s5p_mfc_init_regs_v6_plus(struct s5p_mfc_dev *dev)
R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8);
R(e_min_scratch_buffer_size, S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8);
- if (!IS_MFCV10(dev))
+ if (!IS_MFCV10_PLUS(dev))
goto done;
/* Initialize registers used in MFC v10 only.
--
2.17.1
next prev parent reply other threads:[~2022-05-17 12:58 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220517125511epcas5p4e9a4e3c327771dd1faf0a50057a2c17b@epcas5p4.samsung.com>
2022-05-17 12:55 ` [PATCH 00/20] Add MFC v12 support Smitha T Murthy
2022-05-17 12:55 ` [PATCH 01/20] MAINTAINERS: Add git repo path for MFC Smitha T Murthy
2022-05-17 13:35 ` Krzysztof Kozlowski
2022-05-17 12:55 ` [PATCH 02/20] dt-bindings: media: s5p-mfc: Convert s5p-mfc.txt to new DT schema Smitha T Murthy
2022-05-17 13:55 ` Krzysztof Kozlowski
2022-07-05 11:44 ` Smitha T Murthy
2022-07-05 12:08 ` Krzysztof Kozlowski
2022-05-17 20:19 ` Rob Herring
2022-05-17 12:55 ` [PATCH 03/20] dt-bindings: media: s5p-mfc: Add mfcv12 variant Smitha T Murthy
2022-05-17 13:58 ` Krzysztof Kozlowski
2022-07-05 11:46 ` Smitha T Murthy
2022-05-17 12:55 ` Smitha T Murthy [this message]
2022-05-18 8:41 ` [PATCH 04/20] media: s5p-mfc: Rename IS_MFCV10 macro Andrzej Hajda
2022-05-19 6:46 ` Andrzej Hajda
2022-05-17 12:55 ` [PATCH 05/20] media: s5p-mfc: Add initial support for MFCv12 Smitha T Murthy
2022-05-18 11:38 ` Andrzej Hajda
2022-05-17 12:55 ` [PATCH 06/20] Documention: v4l: Documentation for VP9 CIDs Smitha T Murthy
2022-05-17 13:13 ` Nicolas Dufresne
2022-07-05 11:26 ` Smitha T Murthy
2022-05-18 9:45 ` Hans Verkuil
2022-05-17 12:55 ` [PATCH 07/20] media: v4l2: Add v4l2 control IDs for VP9 encoder Smitha T Murthy
2022-05-17 12:55 ` [PATCH 08/20] media: s5p-mfc: Add support " Smitha T Murthy
2022-05-17 12:55 ` [PATCH 09/20] media: s5p-mfc: Add YV12 and I420 multiplanar format support Smitha T Murthy
2022-05-17 12:55 ` [PATCH 10/20] media: s5p-mfc: Add support for rate controls in MFCv12 Smitha T Murthy
2022-05-17 12:55 ` [PATCH 11/20] media: s5p-mfc: Add support for UHD encoding Smitha T Murthy
2022-05-18 9:50 ` Hans Verkuil
2022-05-17 12:55 ` [PATCH 12/20] media: s5p-mfc: Add support for DMABUF for encoder Smitha T Murthy
2022-05-17 12:55 ` [PATCH 13/20] media: s5p-mfc: Set context for valid case before calling try_run Smitha T Murthy
2022-05-17 12:55 ` [PATCH 14/20] media: s5p-mfc: Load firmware for each run in MFCv12 Smitha T Murthy
2022-05-17 12:55 ` [PATCH 15/20] media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF Smitha T Murthy
2022-05-17 13:59 ` Krzysztof Kozlowski
2022-07-05 11:47 ` Smitha T Murthy
2022-05-17 12:55 ` [PATCH 16/20] media: s5p-mfc: Fix to handle reference queue during finishing Smitha T Murthy
2022-05-17 14:04 ` Krzysztof Kozlowski
2022-05-17 12:55 ` [PATCH 17/20] media: s5p-mfc: Clear workbit to handle error condition Smitha T Murthy
2022-05-17 14:04 ` Krzysztof Kozlowski
2022-07-05 11:52 ` Smitha T Murthy
2022-05-17 12:55 ` [PATCH 18/20] media: s5p-mfc: Correction in register read and write for H264 Smitha T Murthy
2022-05-17 14:04 ` Krzysztof Kozlowski
2022-07-05 11:50 ` Smitha T Murthy
2022-05-17 12:55 ` [PATCH 19/20] arm64: dts: fsd: Add MFC related DT enteries Smitha T Murthy
2022-05-17 14:02 ` Krzysztof Kozlowski
2022-07-05 11:49 ` Smitha T Murthy
2022-05-17 12:55 ` [PATCH 20/20] arm64 defconfig: Add MFC in defconfig Smitha T Murthy
2022-05-17 14:03 ` Krzysztof Kozlowski
2022-05-18 9:42 ` [PATCH 00/20] Add MFC v12 support Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220517125548.14746-5-smitha.t@samsung.com \
--to=smitha.t@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=andi@etezian.org \
--cc=andrzej.hajda@intel.com \
--cc=aswani.reddy@samsung.com \
--cc=benjamin.gaignard@collabora.com \
--cc=david.plowman@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox